#Retroid Pocket Flip 2 (Cows Ascended)
1 messages · Page 23 of 1
I haven’t seen one
When did "translucent = brittle" even start?
Stress like torque from a hinge? 😅
Cheap mid 2000’s electronics
Mostly when ppl started posted pics of their cracked handhelds on reddit, it happens to opaque plastic too, but transparent plastic is an easy target because “it looks cheap” and there’s been brands who don’t test and cheap out
And hinges were cracking even with "quality" Nintendo DSLs. I know my black one did.
It's why the aftermarket shell replacement boon happened.
You wanna see bad quality plastic look at the N2dsxl
The body on that cracked all the time, and that wasn’t even transparent plastic
I’d be fine with saying transparent plastic is more brittle if there was any studies/testing/or proof but there really isn’t
I have opened my n2ds several times and nothing happened on mine
I went through like 3 N2DSXLs that all ended up cracking before I said fuck it and got a N3DS
It certainly feels less rigid than previous nintendo systems but I don't see it bad
Beige plastic is the best
You mean smokers’ yellow
It's a tan
The watermelon/translucent red Flip 1 had the lowest hinge crack rate even. If it had any at all, I don't recall any.
they took cd bays from us too soon
It’s kidney failure
They still exist
Chris said he only had one come in and it was abused. I’ve only seen maybe 2 cracked watermelon photos
My HTPC has a blue ray bay slot
My SNES Flip has a crack but my Watermelon is fine. And funnily enough the crack isn’t even on the hinge, it’s on the bottom
My bottom has a crack too
Your bottoms need better plastics I take?
Probably
Or less sun
That too
Mine was done by who owned it before me, I think they tightened the screws too much. Also the plastic on the opaque models in general j doesn’t feel as high quality to me aa the transparent
There’s probably many reasons for something to crack or not. But from what I read. Solid color plastic tends to use ABS which is tougher and translucent plastic uses ABS-PC blend which is more brittle
This makes me really optimistic and hopeful that the Ice Blue Flip 2 will be really good in that department as well, but time will tell
Something about the opaque feels cheaper
Oh god, you made me remember many years ago when I was looking for a ds lite and I saw one with a screw's tip poking out of the shell, where the touch screen and buttons are.
That made me feel pain
i remember the circle pad tattoo all too well lol
Ah, that's when the top is pressed against the lowe half. It can easily be cleaned off... unless you don't clean it for super long
My n2ds has a lower stick (I swapped it) and it stopped happening, and that can happen in any model as far as I know
But that smudge you can clean up is nothing compared to the actual damage marks most 3ds models can cause with the bezel on the touch screen
I wish i could find the real bad ones
not the worst one I've seen, but...
n2ds avoids that alltogether as there's no raised border around the touchscreen, but it's weird how they didn't change it until the last model
Yeah. Screen protectors were a must
Plastic all the way
Don't have to worry about that here. Or shouldn't have to
Haha. My luck that batch will be delayed
Somebody might get an ice blue in the next few days
Like you know someone who is or were just hoping?
someone posted a pic with it, you saw that one right?
outside in the sun yea
Yeah. It looked great. Just was hoping a 3rd party reviewer might get one
Hope mostly, but also I think Ice Blue might’ve been the most popular from what the poll said
Yeah. Would be cool to see
Would just boost confidence if they played around with it and didn't have hinge crack 😆
Stubbs is getting one and testing that hinge from what I heard. Don’t know what color he’s testing
Think he said he got SNES
I think he said GC
Man people on reddit really dislike that ETA prime fella
Yeah
He is kinda low effort
I don’t mind him tho
Just don’t take him too seriously
He’s def resting on his legacy but I mean it isn’t that bad haha
Haha. Haters gonna hate, anything, everything, at all times
It’s just pretty corporate
Yeah. Don't think anyone is sharing based on the indepth review and performance analysis. It's just cool to see stuff actually exist
🤞
He’s got a large viewer base
Which sponsors like
So he’s usually one of the first to get stuff for reviews
Like yeah if I’m looking for integrity in a review I watch someone like RGC or tech dad
Tech dad is so wholesome
I like tech dad’s teardowns
My two favorites are dweeb and Russ
Or does that count as one

That would be wild.. are you saying Russ is Dweeb?

Finkle is Einhorn!?
I don't mind him, but his videos almost always feel like commercials. He never points out any flaws, just shows the product and glazes about the performance, the build quality etc. So if you're looking for reviews you should look elsewhere
eta makes showcases not reviews, keep that in mind and theres no problems
Im not saying they're paying him to only say good things, but he gets a lot of stuff for free, he's always first in line in receiving the products (know anyone else who has a flip 2?), has a big following... not hard to connect the dots
showcases are neutral, eta does give his opinions, it just happens theyre 100% positive all the time
thats not a showcase, it's a commercial
I dont know about that, he was one the first people to point out that the z2 go was a glorified 6800u, it just happens that he puts on an infomercial voice so it somewhat flies under the radar
I am watching the Russ’s flip 1 first impressions video and I found it funny that he says he is not a clamshell guy while a year later he named 35XX SP as handheld of the year
https://youtu.be/3ia3zs6CAAA?si=W_gkLgQWyhKpPXqM
The new Retroid Pocket Flip has arrived, so I'm going to give you my first impressions after spending two days with the unit. A full in-depth review will come later, once I have more time to spend with the device and run some performance tests.
Use code "RGCRPFLIP" for $10 off the Retroid Pocket Flip
Buy one here: https://bit.ly/3FC2UWg
Times...
Flip 1 not flip 2
Don’t get too excited 
Opinions and tastes change
Indeed
shocker
I have seen SNES in the Chinese video and Black from eta. Has anyone shown GC?
retroid youtube channel but only shows someone playing it.
Oh right now I remember. It was a woman holding it right? The device looked a lot bigger than it is in those videos.
The coolest ones will end up being Ice Blue and GC
Ice blue seems to be the most popular here. Usually I am not a fan of translucent colors but it looks nice in the one photo we have.
All in for the blacked out lurkers
Black buyers are too cool to offer surveys
Too busy playing games without letterboxing
Is there any decent stylus pens for android?
Probably not for these. I doubt they include any of the newer pen standards
Switch stylus is maybe the thinnest they get
Do these come with a screen protector? I read some do
No, and they don't plan on selling any specifically for the Flip 2.
For the most part, being a clamshell should keep the screen scratch free as long as you're not wiping sand over it with your fingers.
You can probably find a screen protector that'll work for it though if you really want.
Though I feel a plastic screen protector might dull the OLED a bit and a tempered glass one might be too thick so hold off on purchasing until we find out screen clearance when closed.
I understand, thanks
I thought black would be more matte
Seems to be a satin type of finish judging by the video
Think you can use a magic eraser to get it more batman-y
I am trying to get a feel of the size but I don't have a n3ds. The size is actually very close to RG40XXV when rotated.
The thickness gets pretty close too if you add the white foam that comes with the device. It definitely feels very thick.
But because of the thickness it feels quite comfortable.
Ooooh that 400ppi
RG40XX flip 
Space age waitless lid!
Also zero chance of hinge breaking
The flip we all dreamed of!
Based on my measurement of the chinese video on my monitor (scaled to 1:1 based on the specs). The thickest part (triggers) is about 30 mm and the lid is 5 mm thick
The foam really only makes it as thick as it actually is in your pocket since the sticks stick out on nonflip
Yes. I don't dislike the thickness now.
But it's also a matter of where they measured it for the quoted specs. It is a wedge after all
The stick location is pretty similar too if you hold in this orientation. Personally feel very comfortable.
Not even reviewers have this thing yet? Ugh
Yes. I am scale the video based on the height. And with that scales the thinnest part is about 25mm like showned in retrocatalog
How confortable will be playing with the two sticks in that spot?
There is a Chinese review video and one quick impression from eta.
I think Joey will receive it tomorrow
Russ on Tuesday
We are all stalking their deliveries 
I’m still trying to decide if I want to get rid of something for this (I have so many emulation handhelds it falls to be funny)
People that have held have commented that it's pretty comfy
I have quite a few Nintendo handhelds but only 2 retro handhelds (RG34XX and 40XXV) Have been thinking about getting a RP5 but now I probably will get a Flip 2 instead.
Hand mileage may vary
If this one also has a grip it would be more like super comfy,provided your hands aren’t really big
Yeah. I think it could be pretty good
I'm optimistic assuming none of the reviews find a major issue
The Chinese reviewer thinks there will be a grip based on the groove on the sides.
Maybe
Future grip + shipping + tariffs = $85 💀
I though of this a while ago when I saw the screenshots. Use the grooves to make it flushed and use the screw holes to anchor the grip and stop it from moving. Maybe extend it on the top to the fan holes and make it clip onto them.
The flip 1 grip uses the screw holes to anchor but apparently it comes out easily. Perhaps the grooves are added to improve the attachment.
It's why I mentioned clipping onto the fan holes.
I am not sure I’ll get a grip even if there is one. I think it defeats the purpose of the pocketable design of a clamshell
The Flip 1 grip is good imo. It can come off easy at a certain angle but it’s great other than that
I still use it to this day
Should just buy 2 flips now and tape them together
Grip was kinda just needed on the first one because they made it a smooth pebble
I mean I still play mine without one a lot of the time but it def helped
Maybe the sticks will make this comfier without a grip because of their more weight centered position
Stubbs posted a video specifically on the Flip 1 grip for those interested
https://youtu.be/kPzThe84-8s?si=FZET4L2oXFwlXMtU
The Retroid Pocket Flip is shaping up to the best Clamshell of the year, and easily is one of the best T618 devices on the market. Today i'll be showing you the Ergo Grip, and we'll see if its worth the $15 asking price. I'll also give my overall thoughts on the device so far. More to come!
I also wanted the mention the RP Flip case is the perf...
That's the official grip from Retroid?
Yes
I don’t think Retroid will make a grip. Otherwise they’d already have it up for preorder.. But rather made the design that way so Etsy sellers can make some for it.
Also just a PSA, ETA isn’t really a reviewer. He’s more of an influencer trying to sell you the next thing.
He used to be a reviewer.
man this channel is sure active lately for there being basically no new info
you can smell the anticipation in the air
safe to say that Retroid didn't go under after the Mini debacle
Flip 2 units being received by reviewers will do that.
Have a feeling this chat will be even more active during the week
I am curious when retroid is planning on shipping out the pre orders 🤔
There's only 8 days until mid-April. So it's safe to assume we won't hear anything about shipping until the end of this week or early next week
Mid April isn’t a specific date so don’t get your hopes up for 8 days lol
Google says mid april is 11-20th
I am worried about tarrifs causing issues
Well they'll ship regardless. Would suck if it's too late in April tho 😆
I would rather prefer avoiding getting hit by the tariffs
I said I'd wait for reviews on this before ordering but with the tarrffs I'm certainly regretting not pre ordering
Yeah. I mean I put one in last week. Worst case scenario reviews suck and I cancel. Still bad scenario is it's awesome but won't ship in time and I cancel. Best case scenario it's awesome and they ship it just in time to dodge them
I'm still going to go with my original plan and wait until August when my m-con is supposed to arrive, that way I can weigh how much I actually want a flip 2 but who knows how things will be by that time
Yea I have the $100 tier backed along with my Flip 2 preordered
We got confirmation that you can take the backplate off and just use it as a controller. I’ll be toting it around if I want to display my Flip 2 on a TV
Plus I wanna use it with my phone
I'm thinking of using that feature with Dex , maybe I'll go all in on using my phone as an emulator if I find it handy enough
If I could use JIT on IPhone, I likely wouldn’t even be getting a Flip 2
But Apple is stingy
Is that even still going to deliver? I mean I'm assuming they're gonna ask everyone to foot the tarrif bill no?
Or raise prices
Yeah I'm definitely worried about how much shipping is going to cost now
Yeah. Def the worst time to be running a Kickstarter. I'm sure Chinese manufacturing costs are going up too
I wouldn’t have preordered if I wasn’t okay with potentially paying for the tariff
According to the M-con kickstarter, they aren't shipping directly from the factories. I assume they will be importing to their warehouse, then shipping to individual customers. So they will be paying the Tariffs but will probably "pass" cost to us.
As a Canadian who lives super close to the US border, I should just order a ton of Flip 2s and open a little shop just on the Canadian side to sell to Americans who want to cross over to the Maple side to avoid the tariff badness

Dude. I'm coming! Heh
Forreal tho. Id be driving across to buy one if I was close enough
Wonder how much they cost in mexico
Not to mention I'd be charging you in Maple Pesos/Moose Bucks/Hockey Pucks
The conversion right now is unreal
Yeah man. Money is gonna go through wild swings
NGL I would do that if I was in that position and had the capital. It's what made HK a shopping mecca for Chinese consumers pre-China takeover.
Check out the Flip 2: https://bit.ly/Flip2AdinDISCLAIMER: I don't recommend pre-orders. Please watch as many reviews of this product as possible and perhaps ...
why is the audio like that😭
Don’t worry there’ll be streams with better audio later today
The audio after the first few minutes is not that bad.
I like the SNES color when it’s open but when it’s close it looks almost like a 3d printed model
Would love to see more of other colors
but it's still stuttery
Yeah it’s not the best but tolerable
rp flip2 fans are too down bad
I'm more worried about the plastic model would get more broken than transparent models like ice blue
But at least if you don't overdo it it's fine
He using the official retroid dock or something similar?
I think so
My RPFlip2 (ice blue) review unit just arrived! Quick unboxing/first impressions video (on my YouTube channel) tomorrow! 😎
Awesome! Would love to see ice blue in the wild.
And now I want to star my own YouTube channel so that I can receive review units 
Would appreciate if you can post a quick photo of it today because I know editing videos takes a lot of work.
Nice
The bigger problem to be is his video quality lol
Not that he even really did anything
Other than that and the color being ugly man just seeing that in motion makes me wish I had already pre ordered lol
I'll do an exception, normally I don't open the box until I do the unboxing video but since many people are asking, I'll share a photo in 15 minutes. 😍
Adin said he thinks the hinge might have issues.
I hope these are just worries and now evidence comes forth. And the hinge stays good if taken care of, at least
South African internet over here making me realize my crappy connection isnt all that bad afterall.
On the bright side, after the Mini debacle they have no choice but to fully support any broken hinge issues lest they just fully tank their reputation 🙃
I take care of my devices but I wouldn’t want to be worried every time I’m gingerly opening my flip2
I dont take care of my devices and I need the hinge to be bulletproof
ambernic can do it on a 40$ piece of plastic, cmon retroid
There's also such a thing as bad luck
such as dropping it?
Yes, or having it in your pocket and it getting hit in just the right way to break the hinge
well yeah but that's outside the realm of QA
I mean the hinge should not give issues while using the device normally, Im not talking about accidents
yes please, would love to see how Ice Blue looks in real life
as a rule, take everything Adin says with a grain of salt
who's Adin
the dude who made the unboxing livestream
I don’t like his videos. The flow is often very random, opposite to the very well structured videos from Russ.
Also he likes to use a knife as a pointer which makes me extremely nervous 😂
oh Im not familiar with him
I mean, mine is going to go in and out of a case every time I play it. Might take it to the toilet sometimes. But that's about it.
I hope it is as strong as the SP at least
I got to know Adin and a few other YouTubers in the retro handheld scene thanks to TechDweeb’s roundtable videos: https://youtu.be/tysHUnN_PeU?si=RXRoqoVSTEsg98zu
Of all the devices in the world that can do emulation, THESE are our favourites. Are you surprised?
Binge TechDweeb: https://www.youtube.com/playlist?list=PLKhoWffbfVnazNbgHhv84XMBJxopjAiNK
EPISODE 1: RETRO HIDDEN GEMS https://youtu.be/NHlF-uU4G2o
EPISODE 2: FAVOURITE SYSTEM TO EMULATE https://youtu.be/Qt2ChXy5lHM
EPISODE 3: GO-TO EMULATION DEV...
Russ, TechDweeb and Joey are my top three if we are going to rank them like we rank handhelds 
Here it is, almost the same teal color of the RP4 Pro. 😉
I'd say its exactly the same plastic
looks pretty good if you like transparent stuff
Hmm maybe it looks better in bright environments
yep, I thought that was a terrible first impressions take. I clearly have different priorities to him. He was complaining a lot about how bad the ergonomics were for this thing with the reasoning that this device would mostly be for dpad centric games, which couldnt be further from reality. And then he seemed overly whiny about the hinge possibly not being strong enough if you forced it back - well no shit, things break if you force them in ways you're not meant to...
Dpad/stick position only matters when they can't be offset due to space constraints.
That's such a surface level take, ahaha.
I have to say the transparent shell looks frail ... GC will be the one i'll go with
Thanks a lot for posting the photo! I think I agree with the sentiment of others. At least it helps me to eliminate one color choice 
GC, SNES or Black? This is a great question.
Want to see GC from a reviewer
The purple looks too purply on the official video
I have the opposite issue, the purple doesnt look purple enough to me
it looks a bit washed out in some pics
GC or Black imo I lean more towards the GC ( more fun )
The Snes doesn't look good with the closed lid , maybe they should have gone with black triggers to make that shell pop out more and the Ice Blue looks super cheap tbh 😐
This is a sunny environment that I shot the photo with, it's a bit darker when there is no sun. 😉
Oh 
Maybe I'll get black then
Man the ice blue looks exactly as I hoped it would, idk why everyone hating
It’s good that you compared it with RP4 Pro where we can find many more videos as references
It looks more translucent and lighter in renders
It looks pretty damn close to the RP4 idk what people were expecting. This isn’t like the Jungle Green render/vs irl which is completely different
Yes, I also put it next to those blue buttons so people can see the color difference between the blue and teal. 😎
I need to look at the photos and videos again. Would be good to see a comparison of the GC color on flip 2 vs RP5. I like how it looks on RP5.
It's nice to have it confirmed to be the same as the RP4 Pro so people know exactly what they're getting.
Flip 2 look so smaller yet wayyy better
I don't like how it looks with all the copper under the shell personally.
Near the speakers? Yeah doesn’t look good
It is pretty thick though
Us clamshell fanatics have been saying this form factor would be relatively tiny for ages, ahaha.
It’s definitely smaller than I thought. But after seeing post of comparing it with n3ds I have a better idea
that's what she said
It’s also similar to RG40XXV so I tried it like this to get a feel
dunno why people were expecting it to be bigger. It's exactly as big as a RP5 screen
thats the whole point haha
Smaller but thicker than you would think
It's just the pics that made it big yk but in real life it's look smaller than I thought and actually way better
Another reference would be a mobile phone. It’s about the same size as 2-3 phones stacked together
thats because the used a person with very small hands in the promotional videos, very common tactic
expecially in China for some reason, have you ever seen pictures of chinese stuff on amazon, they make it look 2x as big as it actually is
Haha. Bigger is better
You get whiplash looking at the Retroid preview videos and the ETA Prime video with the size of the hands, ahaha.
Yes
honestly yeah I think it's just cultural differences, in the west small = cool, in China big = cool
would be super interesting to find out where this comes from
I personally prefer smaller
For handhelds
Small size and big screen
Best of both worlds
But this look very nice way better
for me it depeneds, for something like the 35sp I like small cause its super portable
otherwise too small means cramped controls and hand pain cause I am old
flip2 seems to be well balanced
I personally can't get used to small screens, it's hard to go back to use my gbc or gba, so small retro handhelds feel like a no go for me, I don't think I would have fun using them.
This reminds me. In Baidu forum / bilibili, people complains about RP5 / flip 2 being expansive. They prefer either cheap Anbernic or more expensive and top tier performance Ayn but Retroid for them is weird. While in the west, Retroids are the perfect sweet spot.
that's also interesting yeah
Actually I shouldn’t be surprised because in China people likes to show off. So buying cheap is to save money and buying expensive is to show off
Ayaneo devices are quite popular in China too
Same for cars and luxury items like bags
It's kind of asian mentality. If you're not getting the best you might as well get the cheapest. If you're going for quality you might as well push for the best.
everyone likes to show off, Im suprised people show off with retro handhelds though haha
It’s a social status thing
It’s an extension of electronics like phones
"Good enough" is a weird space and I still struggle with it myself, ahaha.
fair enough
Transparent Flip 1 was most durable so im still going with Ice Blue
Watermelon Flip 1 didn’t crack
Same for me. I actually want a Odin 2 mini OLED but I don’t see it coming anytime soon
Icy blue gang
I feel like "good enough" is easier in retro handhelds than in other fields cause with a retro handhelds you can go "what systems do I want to play on this" and base your choice on that
on other stuff like phones, "good enough" is a way more ephemeral concept. When is a phone good enough? good screen? responsiveness? good camera? battery?
Kind of.
Going by that the R36S would be the #1 recommendation for most people, ahaha.
I see. I don't see myself living with that mentality, i choose depending on my particular needs or wants, and even then "best" is subjective.
Odin 2 seems powerful but seems like a lot of people find it uncomfortable, and that's important.
I somewhat agree with that mentality tbh
Non transparent Flip 1s all crack. Watermelon was superior. Should be the same plastic used for Ice Blue
Someone ping me when the icy blue flippy 2 video drops
It's a weird space when form factor contributes so much to price differences.
and it's a great handheld, but what if I wanna play PS2 and GC?
At that point it's looking at how many steps removed from reliable PS2/GC is it to just get the best.
any news on when non review units are shipping?
Ice Blue looks bad!!! Please swap colors (I move up in the queue and I’ll get mine sooner)
Just wish it looked more like this tbh
Never trust renders lol
actually genius side hustle lol
it's called contraband, but yeah, very lucrative haha
contraband is a strong word
Yeah, the darks are darker so the colour pops more and there's no orangey copper on the board underneath messing up the aesthetics. 🥲
I mean the render is pretty close to what we got when compared to the 3 and 4. Like I said, i didn’t see barely anyone get mad when the Jungle Green 2S came out and looked nothing like the render
the biggest difference are those lighter colored plates below the speaker holes which look pretty bad
Honestly, could probably just take it apart and spray paint the entire board black or something.
Do we know why translucent flips 1 did not break on the hinge while others did? Or at least not as much
Yes apparently watermelon had the least reports of cracking
I see. While I still don't know if I will buy a flip 2 i am still considering the color, either gc or that translucent one. Depends on how well each would hold up.
Icy blue gang
Looks neat, to be honest
While I do love the gc button layout it looks kinda weird to have two colored buttons and two gray ones with the usual diamond shape layout
Mere nitpick from my part
Russ complained about this too. And the stick being on top also is very different from GC controller. Personally haven’t played GC so I don’t have muscle memory of using a GC controller but if you have I can imagine it’s a weird feeling.
It feels very weird to play gc games with the usual layout, specially if they were designed for gc
But i guess you can remap for each game
I don't think it'll make a difference, it's not like I'm using my gc muscle memory just cause the buttons are the same color
Yeah stuff like F Zero only works well with the actual GC layout
For example for sonic heroes the x and y buttons around A makes swapping characters so much smoother
But you could remap x and y to l and r, and move l and r to the right stick for camera control or something
With these things I guess you can make up solutions
F-zero fx is a more extreme example though
I feel like most games are extreme examples
This is the instagram filter chick version
In this video we test out the all new Retroid Pocket Flip 2 handheld! With a 5.5” AMOLD Screen and powered by your choice of a Snapdragon 865 or MediaTek Dimensity 1100 this clamshell handheld is perfect for emulators like Gamecube, Wii, PS2 and more Retro emulation plus is has enough power for any Android game like Genshin impact, call of dut...
transparent colors never look in real life like in the renders
oof "ice" blue looking rough lol
Again idk what y’all were expecting lol
Fair, wish they did though
It looks good to me
I know what I was expecting
it looks exactly like the ice blue rp4p which is what I was expecting so on my end all good
Transparent renders are always different irl
Ngl the black one in person looks slick
It's look fine to me
Icy blue flippy 2 gang gang
Wow black is looking sliiiiick af
I hope russ has a gc one to compare but ngl the black one is winning atm
Plus the bezel advantage of the black
I was pretty split already between ice blue and black and this has become a real emotional rollercoaster now
Ice blue all the way
Go with black, It can't disappoint!
That’s crazy
after seeing it irl, I can now say that the design on the front is definitely ugly
the gc kinda give it too much of a toy appearance to me I had the black gc anyways
And that’s exactly why I wanted GC lol
GC looks like the first toy laptop you give to a kid before they get a real one
What is that image
My brothers and I had a SpongeBob one growing up
It was awesome
Played so my PvZ on it
Your guess is as good as mine. I just went with the first Gravity Falls gif I saw of this meme
The more clearly transparent the plastic the more brittle it is. I assumed that's the last thing we want for something with a hinge after the last one. 
Didn’t the transparent model for the Flip 1 already break the least of all the color options though?
Saw that being said in the chat earlier
Not to say that it being not as transparent as it could for the sake of the hinge is a bad thing though. Also would rather have a transparent clamshell device last longer
Someone said their transparent didn’t break where the other color did
I think it was more of a singular personal anecdote than anything else
It was the red one limited edition
Mostly
The sports red color, right?
Yh I think so
gonna be an interesting week 😄
Chris the US repair tech at the time also said he only received one Watermelon and it was abused. He said he had to repair so many Flips he could do it with his eyes closed
Oh I gotcha
Ok I'm locked in for the US SNES. That area near the speaker kills all of my desire for the Ice Blue.
Tis unfortunate, but oh well.
its just blushing 😊
It just looks like UV discolouration in my head. You know how when clear plastic is exposed to sunlight enough, it just turns yellow? Yeah that. 
But since it's blue, yellowing becomes green 
I don't find how those look that bad, though I would prefer not having them there
Blacked out flip 2 seems cleanest
I still like this Ice Blue color more than the others even with the weirdness around the speakers.
I really like the Black one a lot too
Yeah, he’s not as much of a “reviewer” as he is a tech demo channel, but I honestly wouldn’t be surprised if even Russ got shit from Reddit for doing a Flip 2 Video (even if he directly talked about the external Mini issues in the video as well).
Renders def made it look darker. Even the outdoor photo. Of course that was outdoors
Agreed with the top YouTube comment. Reviewing a black device on a black background is bad
But still I find black to be the most attractive color among all we have seen
Hope to see a GC color in the wild
Just spreading this around. And it makes more sense to me. So shipping prices will likely just increase by $25 (or $50 in June)
I wouldn't guarantee Retroid would undervalue their item. So at worst I'd expect new orders or orders that haven't shipped to cost $25 more to ship
Thought it was at the discretion of the US gov
eeeh this is probably not that visible under normal lighting conditions
photo just had a lot of sunlight
But isn't he in Canada 
NM. Opinion ignored
But rereading the official statement it makes sense. AliExpress might be the only place to get a good deal now. Of course they'll increase prices just cause anyway
If you want the device and you're in the US it might be a good idea to get it now with DHL tbh
So DHL is faster then?
DHL to US is usually 3 days
4PX can be 2 to 4 weeks
The reason I mention this is because Orange apparently wants to put more tariffs on top of what is already announced
For China he wants another 50%
Lol. So 100%? That's wild
I've never had a 4px order take longer than 2 weeks even when the tariff scare first hit
Should mention these aren't exactly tarrifs. That said, they could increase these too
Yup
2 weeks is probably more accurate. DHL def faster tho
no arguements there
On one hand, I'd love if China backed down so I can get things cheap. On the other, that just means he'll play with tarrifs monthly just to "make the best deals" which will be just as damaging as leaving them in place.
China ain't backing down, they literally have all the advantages right now
Nah trump vs China need to be studied
I mean China, Japan and Korea are working together right now lol.
That should tell you how bad this is
With DHL, the flip 2 is only about $35 less than the odin 2 rn since ayns doing a sale 🤔
Choices choices
And pocketable
RP Flip 2 is small
Rumors going around that this might be made up. Just FYI
WOW...I know Adin wanted to be "first to market" with this unboxing but this video shouldn't have been posted...
Odin 2 could fit in a jacket pocket though right
Lmaooo
Not always
Hope that is the case honestly.
Depends on where you live
Ditto
I am RABID for ANY real content on this thing and this video is unwatchable
It's just audio was bad mostly the time
Isn't he a bit of an audiophile tho?
I've been there as a content creator so I can appreciate he's probably ripping his hair out right now
Honestly he just shows shit off lol, and that's fine. People are mad thinking he reviews stuff, but as far as I know he never even says that
Normally I'm quite critical of him but this most recent video was actually fairly decent and candid. He didn't say IT'S A BEAST even once and he didn't shy away from not liking the dpad and the audio levels needing work in OTA updates
If more people think him as tech software the more it just make sense
Also his MONSTER hands are a stark contrast to the Retroid official videos lol
The thing looks positively microscopic in his Shrek mitts
audio issues or not I'm just happy the dock was confirmed to fit
Adin tests that?
Well that's tempting me to add the dock after all
Wish they had made that official and updated their dock compatibility page before preorders went live
Hesitant to change my preorder at all as I was within one minute of the preorder going live and not wanting to risk my "place in line"
you could ask to be certain but I don't think adding the dock would bump you around 🤷♂️
Also fingers crossed that they ship by the end of this week, beginning of next
Isn't Joe Canadian ? He says aBOAt 😅
What about that rumor of Ayn making a Flip ?
Yeah. Some of what he says makes sense tho. There's 100% zero chance the admin has invested in customs to actually process packages for these exemptions. They'll just throw out anything under $800 with no bill attached. Put it on the shipper not the customs agents
He read all of the documents to figure out what's going on for us folk, no reason to doubt what he says
Kinda important for a reviewer to know what's going on even if it doesn't directly impact him
Yeah. I'm just saying the fact I stated above supports his statement
Or at least part of it
So would that be an additional $25/30% shipping on top of the normal shipping costs? That's still oof, but not as bad I guess.
If they are it better be now and shipping tomorrow
It's funny cause tons of people want more of a tech preview. They want like day 1 "reviews" but that's basically not possible, or shouldn't be
I said time and time again ETA prime is an infomercial channel lol
Yeah. Up to the shipper to choose, for the entire month.
Which seems wild to me. As most ship cheap and expensive crap. So your either dinging one or the other
I am just joking , i have no horse in this race either as i'm not in the US. It's nice that he's sharing some info he found for the foreigner followers in his channel tbh
Haha. We appreciate any help in understanding the cluster fuck that is
I'm ok with an impressions video first and a review later
that seems to make the most sense
Going live in about 30 min
Just watched Aiden's video, the audio was terrible for a few minutes and then fine. I might have missed it, but the main physical comparison i want is with the mini. It's the most pocketable powerhouse i have right now but exposed sticks, the way retroid makes them, are just killing me, i've lost a ton and sick of it. really wante the flip 2 to replace that for me, but boy, is this thing thick.
Anyway Aiden's video was fine, i appreciate just throwing that up there and showing off some basics. I agree that it looks cheap and hate that cover, oof. still pumped for mine
The clam fam
@blazing burrow s if you have it, could you compare it to the retroid mini and rp5 in the impressions?
I see one outsider
Please go over screen clearance, there's like 3 of us that would like to use a glass screen protector if possible!
And if maybe we can add third party stop gaps that would still allow for sleep mode
Is it my eyes or that's gc rp5
The one on the bottom left? I think it’s GPD XD Plus
Two of them, metallic blue and black
The one near rg35xsp
I am curious about the one in the bottom middle next to the watermelon flip 1
The X18s
I saw someone has a 35w charger in their cart when getting an rp5. Does retroid not have an adaptive charging function? For example I have a 45w charging brick at home. Is that not safe to use on rpflip2?
Classic powkiddy
Oh right. Somehow I read RP flip2 not RP 5 😅
In this video we test out the all new Retroid Pocket Flip 2 handheld! With a 5.5” AMOLD Screen and powered by your choice of a Snapdragon 865 or MediaTek Dimensity 1100 this clamshell handheld is perfect for emulators like Gamecube, Wii, PS2 and more Retro emulation plus is has enough power for any Android game like Genshin impact, call of dut...
looking at it, I kinda want it now...
😅
Newish, Where does Stubbs stream? Twitch? YT?
The one that no one mentions in this whole hype for the RP flip 2
RH YouTube channel
Is this Stubbs
Powkiddy made a good hinge underrated
No obv this is gameranx. 
STUBBS!!! LETSSS GOOOOO! 15 minutes 🙂
👉Stubbs is LIVE with the RP Flip 2 for an unboxing and gives his first impressions (sent from Retroid for review). Let us know your questions in chat! We'll get to as many as we can. Let's see if this is truly the King of Clams! We ma be joined by @RetroTechDad and @RetroGameCorps, but its also 10am on a Monday, so we'll see!
💸Featu...
First time watching him lol
Oh nice
Drop questions in the live chat and we'll get to as many as we can! 
Rob will be with me
Invited Russ too but we'll see!
what time is it for Russ?
at now'o'clock
Honestly I'm kind of surprised by the negative reactions to this. It seems closer to the render than previous transparent Retroid's have looked at least.
4px takes 5 days to get to Arizona, USA. Not 2 to 4 weeks
Where do you live? Rhode Island?
NYC
Yeah DHL is better for east coast
It’ll spend days getting from the pacific across the us to finally get to the east side
I ordered a Mini and RP5 separately. Both took about 5 days from order placed to doorstep using 4px
I love how pocketable is the console
that clearance may just be for the buttons/stick?
it could be
he hasnt tried putting one on
okay that's enough Flip 2 content from Stubs, straight to the shelf my Flip 2 will go 
That’s my thought
I'm liking what I'm seeing
Me too
Me likey
the abuse to the hinge should be reported to authorities though
do the rgb lights on the stick take much battery at all?
leds don't eat much
Is the same system as the rp5, so doesn't consume so much?
yeah probably fair compairson
I don't find lights on controllers or pcs to be that interesting so I always turn them off, so I was wondering
I find pretty good the amount of horizontal space you save up with the clamshell design compared to the rp5
@blazing burrow The live stream chat is very busy. Not sure if you will see this during the stream. Do you have indigo Anbernic RG34XX? Can you compare the color with your GC flip 2?
Is it bad that I'm thinking the Flip2's main advantage over my RP5 is it sits on my desk without a stand and would make a great oled media streamer...
whats the OTD cost for US-based people?
I don't think anyone knows, I know I ain't buyin sh$t till this tariff crap settles. I'm already gonna get f'ed hardcore by some outstanding kickstarter projects shipping soon
Trump and settles in the same sentence
Cows
Yeah. If it even partially works he'll be throwing out new ones daily
Works as in gets other nations to get concessions. There's no real impetus to get the US to make these things again
Glass?
that's what the person doing the retro handhelds stream said a couple times but of course could be wrong
not like he tried, just looked at the space between the border and the screen
Mm. Hopefully it works in practice
I hope so too, it's a touch screen after all so it'd be nice
Channel is quiet bc we’re all watching the stream
So far it looks good
I kinda assumed flip 2 wouldn’t have a huge caveat but the classic would be far more likely to have something
Cuz its literally just clamshell rp5
Flip 2 looks really good so far
Hopefully. But clamshell can still cause issues .
Yeah I am super hyped but I am trying to contain myself and wait for all the reviews in a week before ordering.
I want an ergo report after like a week of use, with streaming, PS2/gcn, etc
And more thorough test on the hinge
How feasible is waiting to buy one on a non-us country for more reviews and see how they hold, with the current tariff stuff?
What do you mean?
You mean you want to know whether the prices will increase for non-US?
I hope not
Yes,
How much time would it take because I don't have any hope for them to increase and be the same
I hope Retroid is not changing the price and each buyer deals with their own import fee
I don’t think they will increase the price, at least not in the short term
The tariff situation is very much ongoing. It’s hard to say what is going to happen really
Thanks for the input. I think I saw enough for now
I like the new ad xD (with love)
Check out the Flip 2: https://bit.ly/Flip2Adin
DISCLAIMER: I don't recommend pre-orders. Please watch as many reviews of this product as possible and perhaps wait a while before making a purchase.
My X86 handheld: https://bit.ly/AYA2SAdin
My NEW fav retro handheld: https://bit.ly/PMCAdin
My fav cheap retro handheld: https://bit.ly/40xxvLITNXT
...
very curious if this was something retroid did, or some upstream supplier did it and fooled retroid (like with magicx processor)
Do you really think retroid saw those bezels and didnt try to "fix" them??
It was 100% intentional
Either intentional or grossly negligent
So far no gatchas with the Flip 2 after 3 hours of poking and prodding, the day is young though
Eating lunch then filming and poking more
Will share more thoughts on the podcast tonight
48hour live stream of opening and closing it, when?
Stubbs what do you think of the purple in RL? it looks super vibrant in some videos/photos and pretty washed out otherwise
THE HAT
+10 points
I mean... presumably you could make some kind of mechanism to test the hinge... that or else make a child do it.
Maybe get a rotating series of hostis.
Stubbs 8hrs
Zu 2 hrs
Ban 10hrs
Stubbs the remaining 4 hrs
I think we're already half-way there coz stubbs stream felt like a 24 hour stream just to open the device :p
stress testing the hinge, meaning Im getting stressed looking at it
I suggest two hours for Zu because he seems like a man with things to do. Those things may be eating pickles and berating Gary but things none the less
I also realize that my last part of the above where I said that it should repeat afterwars was left out
no lie though, I'd dig a video of Zu just info dumping about FE with no real direction
Get at least 25k people with a similar mindset and I'm in
what's FE?
ooh
also with Zu's PFP it makes his statement seem like a threat
1960s Western Zu can't hurt you
Just realized they have two different chipsets for this one
snapdragon probably worth it for better drivers alone?
Still would not be a fan. But I’m just picky
yeah
and linux support if you're into that
ofc if you're a pick up and play type of person the 1100 might be worth it for the discount
eta prime video showing it off in black is pretty hot
and the battery efficiency
yeah Im torn between GC and black now
In this video we test out the all new Retroid Pocket Flip 2 handheld! With a 5.5” AMOLD Screen and powered by your choice of a Snapdragon 865 or MediaTek Dimensity 1100 this clamshell handheld is perfect for emulators like Gamecube, Wii, PS2 and more Retro emulation plus is has enough power for any Android game like Genshin impact, call of dut...
black is it, just dunno about timing quite yet with tarrif nonsense.
Are the D1100 models really sold out or just not available yet, though
Just not available yet
black does look really good but I do feel basic getting it
I went with GC because it looked the most fun out of the options
im too old to be seen in public with gc
if you're old enough you shouldn't care
Why is he the only one with all the models of DS lol
its just not a look im looking to cultivate lol
Nobody else has a DS lite or regular 3ds
And pretty much everything else they compare it to is an xl
Yeah want to see that comparison too. The Chinese review video did have a n3ds comparison which is very similar in size.
I don't give a shit about what anyone thinks anymore. It's great
yuuup, gave my last fuck years ago, I am free
life is short. you do you.
im glad i didnt cancel. now we just need more classic news
yolo
Hell yes
Atomic purple was my 3rd choice
Behind pkmn yellow and Saturn
ill take what i can get
and the 6 button only comes in one color
so the choice was easy
my least favorite color on a console... it would be good for some mame stuff too
im too damn indecisive for this hobby
trying to decide between black and snes
and also if it'll be delivered before may2~
were this from
I don't remember
I saw SNES and GameCube colorways in youtube reviews today
I’m trying to stay strong but that Flip 2 is black is 🔥
So anyway do we have pictures of the other colors ?
I think IroncladCobra shared his review unit, not sure
Google Lens says its a Reddit post. Since I am still boycotting Reddit. I will never now.
Yeah it was IroncladCobra
I think we have actual pictures/videos of all the colorways
Yes
Adin has SNES, ETA prime has black, Stubbs has Gamecube and someone here posted the Ice Blue earlier, forget the name I'm sorry
I am going with GC
still on the fence
It's a perfect match with my indigo RG34XX
GBA+GC
Hope the indigo colors are similar
my reasoning is the opposite haha
I already have a retro gray/white handheld so I want something of a different color
Oh my collection is full of different colors
But I think indigo GBA+GC just feels good
Like the original
yup fair
I narrowed it down to GC or Black
if they had a Super Famicon version (like the 5) that would've been easy haha
My original handhelds
Yeah I prefer the those colorful buttons too, like 3ds
Maybe more difficult than RP5. We need to see a teardown.
still hasnt shipped?
I wish they have shipped it already 💔
Saves me the trouble
I think it's supposed to ship in mid April
we are in mid april
Are we 😅
Do you prefer black or prefer it because black makes the black bars for non 16:9 content?
I accidentally ordered the black
Black makes the screen blend in better
That said I been trying to get more colorful with my devices
On the flip it's a bit different because the top is the whole screen regardless of the color
Black is still a bit more seamless
XL?
nope. non xl non new
ew
It's small, the screen is awful, its not comfortable, my hands kinda like come together holding it
I wouldn't say it's pure garbage but it's pure garbage 💔
Okay maybe not ew but it could be better
I like the look of it, especially the ice blue one
But I don't have one
I want a n3ds too. I have a n3ds xl but it's a bit big and heavy
I had both the new and non new XL, The new feels alot better in terms of actually using it imo
That said the non new has one massive advantage
Before knowing the retro handheld scene I wanted to collect all nintendo handheld including variants
You can take the SD card out without having to unscrew the whole damn backplate.....
But now I just want to use the money for cool retro handheld, LOL.
If you hack it you can transfer via wifi
I did it slow as hell
xD
FTP is not...... great
Trust me downloading a game off of the hshop is pain using wifi
True, if you need to add new games often is not ideal
My personal favorite so far since getting into the hobby are Odin 2 Mini, RP5, PS Vita
Not that much a fan of the Odin 2
To be fair I tried the bigger handheld stuff and I just can't find a reason to use them. They sit in that weird middle ground for me of too big to travel with but too small for at home gaming.
Got a decent pc for the big games already
I think thats also the case with the n2dsxl
Oh yeah I forgot about the n2dsxl
There was a lot of ds models so forgive me for that.
too slow
Even this one was late. The original was posted like 12 hours ago
Yeah but not late for the channel
oh i knew i saw one somewhere just couldnt remebmer where
It was posted in this channel around the same time as Retroid discord. But anyway I am not going to argue with you 
Cows evolved to ice blue
This channel is the ONLY ONE that matters.
All kidding aside the blue looks great
do we have any open pictures of the grey one?
Adin did a video on it
Adin's 1st look video is 1000x better than the unboxing he did, I get it, he wanted to be first to market with the unboxing but the tech issues were RUFF
AND it was cool to see that Retroid have already committed to addressing the home/back button issue that Adin encountered
So Retroid ARE watching these videos
Technically the Chinese reviewer was first to the market for unboxing. 🤓
Originally posted on Bilibili, doesn't count 😉
It was posted on YT the same day tho
I only appreciate original content (I'm just being facetitious at this point)
Jokes aside, I am sooooooooo excited
And I'll soak up EVERY video regardless of language/quality right up until this thing is in my hands
Hyperfixation is my jam
I enjoy it, same shade as the RP5 GC here
HAD to do the hat 
Damn, so many enraging conversations on discord could be avoided if folks just said something like this
Sounds good thank you! Think I'll go for GC then
I think its winning so far for me over SNES, but we'll see, that was the retail one I bought...soon. Import fees for me to pay? Yet to be determined 
I'm someone who has a hard time with sarcasm
End every sentence with "Kappa".
Snes would've been my first pick if they had a super famicom version like the rp5
Oooo OMEGALUL KAPPA Ws IN CHAT
The black one seems uber giga sexy for anyone having a hard time choosing
I would've taken SNES if it didn't have rgb
I am 1000% sold on Black (already was but the ETA Prime video solidified it for me)
And as I've said before, it's CLOSE ENOUGH to the X18s that the upgrade won't incite questioning 😉
Have they pseudo confirmed the finish is the same satisfying matte?
Yeah
OMG Horizon Chase on that OLED drool
This will be my first OLED device so that's huge for me
Couldn't justify upgrading my LCD Steam Deck but here we are
Doesn't get much better for a 1-2 punch than Flip 2 & Steam Deck
Yea I was pleasantly surprised by that new Retroid launcher, I might give it a try before moving over to a Daijisho or ESDE
can't wait to play pokerogue on this bish
GBA Romhacks are gonna be LITTY
Oh yes
I've been messing around with a ton of dual screen configurations for an upcoming video on #dualscreen #emulation. I think the #RetroidPocketFlip version just makes me the happiest to use.
The setup process for making this work is a modified version of what I've already demonstrated with the Steam Deck. Here's a quick tutorial: https://youtu.be...
Im assuming flip 2 can do the same
I wish the micro stutters could be wiped entirely
Once Azahar hits its stride, the Flip 2 will eat this up
Azahar is such a wet fart
Not supporting .3DS is crazy
I’ll stick with lime thanks
Not that hard to get .cia
Buy the Retroid Pocket Flip 2 here: https://joeysrh.link/RP_FLIP2
Support Me:
Recommended Handhelds/Accessories/Stores:
Linktree - https://joeysrh.link/Linktree
Website - https://joeysrh.link/website
Compare Handhelds - https://joeysrh.link/handhelds
Patreon - https://joeysrh.link/Pat...
oh im so good with the blue now
Yeah but I’d rather not have to convert my whole library
he says it feel cheap tho hmmm....
That is something he says about nearly every device though
just change it to .cci
or i could stick with lime and not change anything
ig, this is where most of the development is heading though
i fw this heavy
that's fucking cool
These lights are starting into my soul
People panic swapped out of ice blue earlier 🤣🤣🤣
nothing electrical tape can't fix
when the transparent color is transparent
why would you even care about leds shining through the back you're supposed to be looking at the screen in front you goobs 
ice blue is the best
the light bleed is a feature
So now we got both Adin and Joey saying it feels cheap 
looks great in low lighting too
I'm only just now realizing the shoulder buttons are also transparent. holy cow that is cool
I love transparent controls, they're too rare
please don't delay this color retroid 😬
Do they mean the plastic feel or the general build quality?
during the rpmini fiasco adin said hes a "content creator" not a reviewer
so we can safely discount anything he says forever now
I think adin was more referring to how it looked, but seems like joey is talking about the feel
yeah i wish they would've went with a pure white color, that would have looked a lot better imo
like on the rp5
seems pretty standard
Looks like the plastic on the transparent 34xx
that grittiness is great for preventing smudges
what is this supposed to be?
The GC version does not feel cheap to me, that transparent color looks pretty sweet, seems the ribbon under has been there in pics all along? The lights out the back tho 😆
Finished filming my video coming out tomorrow, I kind of like the toy vibe, if that's what they mean by cheap
The top clock logo thing is what annoys me, cover with a sticker
We'll talk about these updates and the Ice color on the podcast (starts in 15 min)
Yeah it's always kind of hard to tell what people mean when they say something feels "cheap" in this space. Do they just mean it feels like a toy rather than a premium tech device? Because imo that's good. Do they simply mean it feels like a fragile, low quality piece of shit? Because that's bad
i htikn its the weight distribution throwing people off
its not all compacted into the middle anymore
the screen is a substantial source of weight
I tend to assume people mean cheap as in the feel of something like an og gameboy, versus premium like the vita 1000. People seldom mean cheap as in actually cheap, but use it to describe something in the $150-300 range that doesn’t feel like a $1000 dollar phone.
The lid design is god awful.
my round RH sticker is gonna cover it wonderfully
but make it worse because it's holographic
Yo. This is awesome
Are the plastics like the RP3 or the RP5?
I didn't 😆. Ice blue baby!
It wont. The logo is embossed and you'll see the design through the sticker. We saw that when Stubbs put one on.
get a bigger sticker 🐈
You mean smaller, it has to be the same size as the circle logo. His sticker was bigger.
Just stack one sticker atop the other until it goes away
actually what i was thinking
stupid but effective
I need that on a hat for work
I wonder if you can sand off the design
having the ice blue could actually make it easier to put back together if you're bold enough to take this apart
I love the emblem yall
trigger problem on joey stream
I kinda don’t hate it either lmao
He fixed it
It was on his end
Retroarch thing
So far ergos seems to be well liked by him
Which is great!
As he was worried about it for awhile to a point where it killed his excitement
oh joey you goofy ahh
And no reviewers are having QC issues yet, so now it’s down to the hinge
We told him that layout would be nice
But early hinge tests are good
My work is done
layout looks really good
Yea
its a matte plastic that feels like back of RP5
When Chris said the layout was way more comfortable than it looks and it was sloped
I knew it’d have good ergos
im mostly play smt and fire emblem on flip 2 most of time uses the dpad
I was originally worried with Adin but Joey I trust a lot when it comes to ergos
I'm glad people are liking it
Classic I think will be more mixed
Flip 2 was hard to fuck up if they just ported rp5 and fixed hinge
And didn’t do shit ergos
Ordered mine earlier. Kind of sucks there’s no grip for it but 🤷♀️
looks decent
I'm not gonna lie, I was almost kind of tempted by the Black RPFlip 2 when I saw in ETA's vid earlier how cleaned it look and thought about that being a possibility for me to get over Ice Blue.
But now that I see how absolutely sick the seethrough RGB lights are... I'm so glad I wanted Ice Blue from the start
Seeing Joey's stream of it rn, man it looks so nice for real...
Ice Blue is locked in for me now
Yeah, I ordered ice blue myself because its my favorite color and seeing Joey's video made me really happy with the choice
Same. Black was tempting but glad I waited for the ice blue reveal. Super excited for it
ice blue gang
Huh... Joey thinks the buttons on the Flip 2 sound mostly the same as RP5, but he does think it's a bit more muted still
What does the RGB on the ice blue look like?
Hmm
one of those oled devices you can justify non-black because the design imo
THIN bezels + no body around the screen
I did. Bought two black. Originally, I was going to get one ice blue, and one black, but... I... Don't like the green. I'm sorry, maybe it's blue to you folks, and I know glaciers can have a blue green tinge, but that, for me, is just green and I don't like it.
I was going to get SNES colours if the ice blue wasn't for me, but the very few videos displaying the device talked me out of it. So two black it is. Even though I can technically only afford one... But if prices increase as high as being predicted, I'll never be able to afford one again, so might as well stretch my wallet now rather than pay more (or not at all because too high) later
What are you going to do with two devices though?
Especially if you can only afford 1
Thats like asking a dragon how they will spend all the gold they stole in their most recent raid...
IT GOES IN THE HOARD
Yeah
I like having backups. I've been in the situation before where I bought something, loved it, and it was gone forever next time I tried to get it.
I could also set up one on Android and the other with Linux, that was something else I was considering.
It'll be okay, though, I'm going to see if I can get more overtime this summer...
Hopefully.
I'm not a fan of the logo though
Personally I think the best two choices are ice blue/green and black
At the moment anyway I keep changing my mind
Ah I see
I also almost missed out on the original Flip, I literally only found one because Droix had a couple left, and it wasn't even that long after it's release. So I was determined not to miss this one
I still have my original flip: hinge is in good shape because I didn’t use it ridiculously heavily
@blazing burrow how the plastic flex wise?
joeys is pretty flexi
The hinge / lid? It flops if you flail it around
If I twist the plastic shell it doesn't flex
