#GameMT E5, E6 & Plus
1 messages · Page 8 of 1
there are some differences between the old BSP based ones, presuming the panels used have existing drivers these should 'just work' as a target
it's probably half an hours work for someone familar with the devices to do
#aliexpressfinds #aliexpresshaul #aliexpressinfluencerprogram #aliexpress #aliexpressgoodfinds #retrogaming #anbernicgameplay #powkiddy #androidgames #retroid #nintendowii
Buy The GameMT E5 Plus
https://s.click.aliexpress.com/e/_De0zLC1
Buy The ShanWan Mini Controller
https://s.click.aliexpress.com/e/_DFA...
Buy The HP Micro SD Card from Al...
i have a feeling it's configured poorly if tekken 6 is playing -that- bad
The 64bit version for gamemt E6 not the plus version anyone was the flash files or are not public released ?
not publicly released and only works with v2 screen
Better name for it, is e69plus:))
yeah, i looked back at my old e6+ android vids of tekken 6 and GTA:LCS(ps2 mesh/texture romhack). something is probably up with the clockspeed in Fred's video. Either that, or he's running everything in 32-bit android
he should probably test the 64bit android firmware
i got an e5 plus coming.. ill update to latest android and give it a whirl. i'll post my results
Hi at all. i'm new. Has GAMEMT E6 Plus rumble?
are these parameters https://retrocatalog.com/RetroHandhelds/gamemt-e6-plus right?
GAMEMT E6 Plus Full Specs - Retro Catalog
thanks for help 🙂
New revisions they have the rumble pads, but there is no motor installed from factory.
@candid ridge is there any info on which rumble works and fits in the housing?
i hope in the rumble mod like rgb30 powkiddy too.
link of official firmware of e6 plus?
When I get a chance I’m going to attempt a Xbox one trigger rumble motor. Rather than those standard coin style ones in older phones
is there a photo of the electronic card of e6 plus?
i'm going to make a "this dpad isn't shit" video by playing some puzzle fighter out of retroarch
But if you lose you have to blame the d-pad 🙂
in that case i should have done a marathon session and tried to beat it in one go lol
a quick test of the depad response
i could just do Lumines in infinite mode
at 16:20 a false diagonal ended my streak. THIS DPAD SUCKS
i mean... it definitely will bug out on you 1 out of every 10-15 presses. It's nothing you can't recover from, but... probably best to open up the unit and partially cover the inner half of each dpad input
At 16:30, the dpad finally fucks me up good
Is e5 plus legit
Was looking on Ali and ran into a listing
But it looked kinda sus
The device is real
@fast scarab it's real. There are yt vids on it and I have one coming that I should get any day.. just finished local customs 👍
Is there a link I can get one from
@fast scarab https://a.aliexpress.com/_mLAjnBz
Rip where's the Eva 😭 colorway
Is green the only clear one
Didn't they have a purple evangelion one
I think so.. thats the one I have coming
Purple? idk.. didn't notice that color way
They had a purple for e6 plus
The green?
I have the transparent green on the way
Yea
@mint ember https://youtu.be/Hg32nfvRBNY?si=EU5fIvIPVxgDP-EO
GameMT E5 Plus Dualboot Linux CFW / Android 11 64bit, 2/16Gb, 1280x720, Dual 2.4/5Gz WiFi, Rumble/Vibration, Rockchip RK3566
Price confirmed to be CHEAPER than E6 Plus👍🔥
Thanks to GameMT representative @Sinyorksu for sharing this gameplay with community!! 👍
To request more videos with gameplay from various handhelds please subscribe my YouTub...
Are you running stock android
Is this what it ships with or is cfw for it
Yea.. i don't think that color released on final. I believe sleepy gets preproduction/prototype models
Best to tag him for answer?
@fast scarab actually seems there is also a transparent white
Maybe that video is a transparent white with LEDs making it overall look purple?
@mint ember also replied that the screen was touchscreen in his comments? I was under the impression it didn't have touchscreen? Was that a prototype that they removed touchscreen or does it still have touchscreen?
WAIT. IT HAS TOUCHSCREEN?
@muted moon check the comments on this video. @mint ember replies to a question that it does have touchscreen
GameMT E5 Plus Dualboot Linux CFW / Android 11 64bit, 2/16Gb, 1280x720, Dual 2.4/5Gz WiFi, Rumble/Vibration, Rockchip RK3566
Price confirmed to be CHEAPER than E6 Plus👍🔥
Thanks to GameMT representative @Sinyorksu for sharing this gameplay with community!! 👍
To request more videos with gameplay from various handhelds please subscribe my YouTub...
Idk 🤷♂️ .. I was under the impression it didn't. Ill confirm when I get it
guys, i think y'all are getting mixed up luv
i'm 99.99.cat% sure those videos were originally posted by sinyorksu
i don't know the exact source of those videos since i couldn't find it myself, but you can see from these videos sinyorksu posted here:
#1168386197605855313 message
they all have the same placemat as the one found in sleepy's videos
plus the gameplay of the video is in chinese, sleepy probably wouldn't be using a chinese language setting unless he is from or lives in china, which i don't think he is neither
Im pretty sure he is russian
im pretty sure he is a cat
@cursive star tried adding a rumble motor but didn't work
Gamepad tester says n/a for vibration. Might have more on the software side or it's not fully populated
@Hack Around I added a rumble to the pads.. is there something else I need to do to activate?
Android should have the driver for rumble if I am not mistaken
On linux there is no driver as I have it on my ToDo list to add support
Any idea why it's not working by simply adding a motor?
This is old video, sorry. E5plus don't have touchscreen.
I'm pretty sure that I'm sleepy at the moment
You are welcome👌
Maybe the Xbox vibration motor requires higher inrush current than the board can supply there is a option for vibration in the settings though
@cursive star I don't think so cause the software doesn't acknowledge or attempt to use the rumble... Just says n/a
Try going into Settings > Display > advanced options and see if enabling the vibration option works
Well.. doing that it works
But... It's on non stop.. I have to switch it off for it to stop
So the motor itself does work but it appears it might not be configured correctly
What happens if you go to settings > accessibility > vibration and haptic strength and turn on touch feedback?
Also how much is the console shook with that motor 😂
Haha.. rumble feels good if it works
I used the rumble motor from the triggers of an Xbox one controller
Well that’s good news then. It’s the same motor I had planned to test
As I thought it would provide the best experience over one of these
Yea. Saw those on ali
I do a lot of elec repair so I got quite of bit of loose parts
Downloaded a gamepad tester from the play store and show no rumble support
Should I try jelos to see if it works on the Linux side?
I don’t think it will I don’t think it is properly configured
k. i really only use android with the device. id have to find the latest linux avail
loaded the latest linux and no rumble aswell. hopefully an update is released to fix it
i also tried loading the e5 plus linux on the e6 plus since i was hoping same processor chip and e5 plus has rumble that it might work... but nope. i get no display. I heard the intro video playing but i cant use the device with no screen.
Hmm 
surprised people haven't done the OG GTA 3 android ports on these yet
This would be amazing in the E6 Plus Shell. 🥲
@river zenith
when release is
Surprised there's not way more ppl in here
The e5 regular is going extremely viral on tiktok rn 💀💀💀
Just like that one Gameboy with the smiley face did a year or so ago 💀
They did say the e5 jellymini is a good seller
it's a tribalistic culture man. GameMT isn't mainstream, so its almost always side-eyed and gets a lot of pushback.
That is probably why tbh
you're going to see a lot of armchair salt if the E8 launches and is decent. The talking points have already killed the announcement thread.
Time for the adventures to begin
Well.. I can confirm the e5 plus doesn't have the best experience out of the box. Seems to be 32 android with no Vulcan. Going to flash latest update to emmc which is 64 android
But I do like GameMT update/flash process.. up with the latest in 2 mins 👍
Took a quick vid with my son playing Spyro. Plays great
Using better Xcloud app gamepass streaming
I can't get vibration to work properly on the e5 plus aswell
Does the same as the e6 I put the motor in. If I turn on vibration in the display settings.. it just keeps going till I turn it off
Hey everyone, it’s been a few months since I was last here. Did the normal E6 get a new “update” since April, or something like that?
@hard veldt the latest update for the normal e6 is dated 11/12/2024 from the gamemt website
http://gamemt.net/index.php/2024/09/08/e6掌机开源linux系统文件/
unforunately its a baidu link..
https://pan.baidu.com/s/1MuPCD6q9T6iMhA8zT4u1pA?pwd=2i6e
Maybe you can get someone to post it somewhere else.. i cant download from baidu myself
百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固,支持教育网加速,支持手机端。注册使用百度网盘即可享受免费存储空间
Yoo Hows the E6 Plus? Does it run portmaster?
NOT TOUCH SCREEN
E6 MAX A527 Chip
i have a question
when you get a andorid handheld game console
but come without games and game system
for example not linux game system
and what will you hope it need have
such as which app you want
well, if there's no games, i would at least want the google play store
but most customers hate android systems because they have to set up their device. so i would recommend a customizable emulation frontend that has an android apps section like daijishou
oof, the screen on that does not look great
, it starts discoloring significantly when you started tilting it
do you have a choice to get a better screen or would it raise the price significantly?
Google play store would be nice
A frontend or launcher atleast like daijisho, It’s nice to have a key mapping feature on the android device too so we can map the screen controls to the buttons for controller unsupported games
I just like a clean android system. I had to uninstall all the apps and settings on my ambernic and set it up how I like anyways. Clean system w/ play store is how I prefer or at least minimalistic
E5 plus is a good device.. but id recommend the e6 plus all day with the touchscreen. Unless you want a vertical. Android with no touchscreen is just too cumbersome and at times unusable without a plug in mouse around.
So the difference of the e6 plus and max is the a527 chip? Is there any information on how much faster it is?
Drastic, ppsspp, retroarch Nightly from the buildbot page, redream/flycast, and maybe a pico8 emulator if one exists on android. Dolphin mmjr/mmjr2 and nethersx2 as well, if you feel confident about those emulators
Most reviewers have no issue side loading apps, but end-users can be very vocally against it
Spec sheets are readily available for both a527 and rk3566, yes.
Pretty easy to find tbh with a simple 'a527 specs' search or whatever
CPU power difference is like 2257 vs 922 on multicore
@muted moon you have the e6 plus?
Yep
Ah how’s it in comparison with the TSP
The tsp feels like a ps vita, but performs worse than rk3566. Games like Liberty City Stories and SOCOM Portable are not playable. Also, no touch screen.
I've had both
honestly, if you don't care for midtier and up psp, the tsp is fine, but I do so (shrug)
@shrewd fractal e6 plus is my main unit atm.. great unit and size. Has both Linux and android w touch
@shrewd fractal does retro to current PS/Xbox/PC remote play and cloud.
I do
the OGU is not very comfortable and steam deck is too much for retro stuff at least for me. Was thinking to get the TSP but saw this thing.
I see people cursing about the build quality in Reddit. How bad is it?
The one Im using is yours 
I don't have an issue with the build quality
Dpad isn't the best but you can get better/used to it
Takes a bit of muscle memory to get the input correctly
Thin plastic, yes. The tsp feels better-built. If you can find one in marketplace, I would suggest an rp3+ or rg505
The speaker wire disattached so Need to use an earphone now. Other than that everything runs as it should 
oddly enough, I reach for the e6plus more than my r36s these days.
@shrewd fractal I actually have a pic of the system opened...maybe could give you a sense of it's build quility
Some cold solder might fix that right up
Not a fan of android only devices. My mind is telling me to give this thing a go
The e6 plus is a great handheld, as long as you research the capabilities of the chip
No heatsink in there?
All I know is it runs harder than my old rg353v.
I hear thats due to quad channel Dd3 ram or some tomfoolery
@shrewd fractal 🤷♂️ I never moved and checked under the batt area
I don't have any heating issues and the system never gets too warm in my hands playing
I mean the heatsink is your hand 
Ah. How many hours does it typically runs
Lol
Also are the triggers analog?
The heatsink is the LCD lol
No but I’m hoping the max will have analog triggers
Switches
When is it coming out
Realistically yeah. I wish that more companies would integrate better cooling they keep upgrading chips and they keep getting hotter and hotter 🤦♂️

Well.. these handhelds aren't running the latest and greatest. Usually this tier are cheap and efficient.
They do get warmer than I’d like though realistically. I even had heat issues with my TSP in summer.
To the point it flashed its angry red light

Well . That's not good.. haha 🤷♂️
Between the TSP and this thing which one do you prefer
Overall
To be honest it’s really hard to choose
Both have advantages and disadvantages
Biggest advantage to the E6 Plus is the option to use Android, even better with the 2.4ghz version at the moment since that has a fully functional android 13 build for it.
But if the 5Ghz version had full Android 13 support I’d be happier 
Screen isn’t exactly miles apart (with trimui set to 50% saturation as default) the E6 plus has no saturation control. The TSP has a little better contrast too.
Next is the Vita sticks vs switch sticks, I prefer the switch sticks all day long.
so there are 2 versions?
Identical except the WiFi chipset to my knowledge and with experience of owning both
Ah nice. But how do I know which one has 5ghz and which doesn’t
i bought 2 in the last month.. both were 5G
Removed SAF/Scoped storage; full busybox with all applets and kernel with NFS/BTRFS support; container support with working vulkan-wsi driver stack/termux so you can just run linux container userspace and forget about android UI
Ty
@shrewd fractal yes.. it runs postmaster and it's games great.
Towerfall is an awesome game.. been a while since I played and played quite a bit after loading in
@shrewd fractal if there is a specific port your looking for.. I can show it running
The problem with the tsp is it tries too hard to physically be the vita. If you never owned a vita, it doesnt seem at all like an awkward device.
How does Allwinner A527 performance compared to RK3566 and Allwinner H700?
Nice I just need Stardew
The vita wasn’t very good for me as someone who enjoyed the PSP
read and decide for yourself
Wow! That's not a bad SoC!
linux and android are better at splitting computations into micro threads, so having more cores actually helps.
I see, so E6 Max basically will utilize all 8 cores and threads for its emulation then...this SoC might perform similarly to T618 I guess (?)
Dang, enticing
t610.
t618 is a bit outside its reach. this is kind of competition with the rp2s.
the s922x in the ogu is a tad weaker tbh, even if the gpu runs circles around the a527's
I guess this device is still coming soon, can't find any in Aliexpress. If it is under 100 EUR, it might be a banger
a lot of emulators wont really use those cores no matter what, so it will be really case by case
its fascinating how overkill gpu that thing has 😄
dolphin can definitely spin computations off to multiple cores. i've seen that definitely when manually shutting off and turning on cores on the rgb10max3pro and ogu in the ubuntu/lineageOS firmwares
and there are some stuff like mednafen for saturn, which runs at... 2 cores 😄
but mednafen would be slow even s922x a73, so whatever 😄
yeah. if you can't run Albert Odyssey in non-slideshow mode, just don't play saturn i guess
a76 on 3588 can have some slowdowns on mednafen, even worse on the libretrocore version
the reality though is... what saturn game does anyone really want to play, and have they been playing it since like the rk3326 days
because if you're in the "I prefer grandia on saturn and not playstation" crowd, there's probably something off about your preference anyway.
only a few like panzer dragon saga and saturn powerslave 😄
lol
those cutdown stages in ps1 powerslave are "EWWWW brother EWWWWW"
powerslave, that old fps. i remember that
Anyone here used any app to map the E5 Plus for touch only games?
Also any app which can give a fake mouse mode?
@river zenith are the Lights solid white again?
Is there actually a usable mali blob for the allwinner - they have been completely absent for most of their SoC's on the libmali side except for android.
?
that white looks great. i want that color
@river zenith it would be nice to have all the emulation configured out of the box. If you install emudeck for windows and sign up for 1 month of their Patreon, you can see how they have auto android setup very nicely. https://www.emudeck.com/#downloads
Configure your SteamOS, Steam Deck and Rog Ally Emulators
I also like this as my default launcher
https://play.google.com/store/apps/details?id=ca.dstudio.atvlauncher.pro&hl=en_US
1️⃣ Yes
2️⃣ No
3️⃣ I Don’t but would if I could adjust brightness
Just curious on other people’s thoughts on this.
No LEDs... Wish I knew how to turn them off on linux
From tools. On cHAos I included control for it.
Brightness cannot be adjutant as is not connected to pwm, is just to a digital pin
@candid ridge which is the latest chaos img file for the e6 plus? I have e6plus-20240804-8G-V2 on an sd card since its the latest on the gamemt website. I tried cHAos-gameMT_E6_new_display.aarch64-20240509.img.gz but it didnt boot?! maybe cause it doesnt say e6 plus?
nm... think i found it.
https://github.com/tech4bot/jelos/releases
@candid ridge can you add "Reboot to Android" in the quit menu on future releases?
This is from GAMEMT Dev?
@lost swan do any of those have e6 plus led control?
@candid ridge seems to have the best build since I am able to disable the LED lights.. saves me from opening it up and physically disconnecting them
You couldn’t disconnect them anyway iirc they are soldered directly to the pcb
All of my e6 plus stock Linux cards had the option to disable the LED’s l think it’s called LEDJoyConf or something similar it’s a text based UI you select always off with arrow keys and Start button to apply
The console will then reboot and then the LED’s will be disabled in linux
Yeah it’s in the tools menu, it is callled joyleds_conf
sold my rg505 but decided to keep my e6 plus just a little longer
Sold due to the ergonomics?
just didn't use it enough
been playing the rg556 more and picking back up on Vita titles
Ah yes 556 is a nice device
@cursive star I don't see a tools menu when I flashed the stock linux
@solemn orbit Need stock image for e6 plus?
Thats what it seems
Uploading it.. I'll share a link soon
Latest GameMT Linux and Android x64 listed above for GameMT E6 Plus... @solemn orbit
@cursive star Found it.. the Tools menu is disabled by default in the Game Collections Settings menu. After enabling, i found the led config in the tools menu. Thanks for the info to dig deeper!
Anyone knows how to download anyting on gamemt.net site ? Because all links are on that Baidu site ... ?
Looks like this. For e6p and e5p, but no workflow templates for build release.
#1168386197605855313 message
@worn viper I just posted link with latest releases from GameMT site on Google drive for e6 plus. Is there another model your looking for?
I have an e5 plus , and on gamemt site it hás One android update and the Linux version i want to put the Linux version on One sd card and update the android system 🙂
@worn viper ok.. I have that aswell.. I'll post it
https://drive.google.com/drive/folders/1G-IF6WopB5nR6lAkfsJ8qZoN9MNqriXy?usp=sharing
Have both latest E5 Plus / E6 Plus Android and Linux files from GameMT website uploaded.
@uneven bane I have both the latest releases and mmjr2 (https://github.com/Medard22/Dolphin-MMJR2-VBI/releases) version installed and use which work best for the game
thank you
@worn viper is there something you need? I have the image files on my Google drive. Domain is there but might be modifying their page
I was searching for the 32 bits version of e5p to flash it again and backup the original apk files from it to try to put them on the 64 bits version
@worn viper Did you flash your device yet? If not, you can make a backup img of it how it is using the rockchip software before you flash the newer x64
IMO.. the stock 32bit software is terrible and you won't go back after flashing
I don't think the 32bit version is available at the GameMT website to download
I already flashed the device
I think to was the 32 bits there but the site now is not working
Gotta say.. E5 plus been my go-to device at work. Love the kickstand for NFL red zone and swap to playing at any time
is it your only device at work perhaps? 
haha.. nah. I dont have a huge collection of handhelds.. but my other options are x55, rgb30, rg556 and the e6 plus. This is just very convenient at work with the kickstand and shape of it.
I dislike the uneven bezel. Other than that this seems fine.
I think they fumbled with that bezel They should've put that at the left hand side instead and done something similar with the gameboy
That would have been amazing tbh
what a handsome boi
I like it!
Dpad is eh, but overall comfy and quiet, screen is very nice
GameMT E5, E6 & Plus
ugh bobby is still waiting for his unit to arrive
he bought a pink one
niiice!
one thing i wish this device had though
is a lanyard hole so i could put in one of those charging cable lanyards
such a missed opportunity
also @barren thistle how's the viewing angles?
one thing im noticing about the gamemt devices is that on camera, their screen's viewing angles are noticeably bad
the kind of bad i never saw with other companies
Not great
Probably similar to what you've already seen with game mt
but dead on, looks nice
filmed a quick impressions where I talk about that a bit, I might throw up on the YT this week as a short
sinyorksu is cool and all but i'm still waiting for him to step up his game
it's so cyute
he's doing a good job making his brand a central focus of his products, he does it much better than some of the bigger companies, you can tell they're not generic
i just hope someday the product quality itself catches up
Considering the current state of YT... I'm stealing "throw up on the YT" for a different kind of use...
at this point we might as well move to the black and orange website
As for the E5 Plus it's good but I found myself having to set some stuff up with a mouse and an adapter
@barren thistle 👍 highly recommend updating the firmware from stock.. either latest android x64 or jelos
@summer aspen does it enable touchscreen like psidozer said?
meow
I don't think the e5 has touch
@paper veldt no touchscreen on the e5 plus.. just performance gets a lot better with the latest builds
retroweenie showed his kid using the touchscreen.
#1168386197605855313 message
also sleepy showed it off in a longer video
nah.. i showed my son playing gamepass on it.. not touchscreen
that pic was before i got the unit and read sleepys video comments and sleepy later confirm on this forum that it doesnt have touchscreen
lies on the internet then
yea.. only thing holding this device back imo.. but once you got it setup its ok.
the android file manager doesnt work with controls and when you gotta fix something or use the android bar its kinda tough luck
when you got your permissions, files, emulators, and a dash setup like daijisho.. it works. just on the fly changes arent really happening without a mouse OTG
I mainly use it for kodi and normal emulator stuff. The E6 Plus is a better android experience
also.. even tho E5 Plus main added feature difference is rumble... i cant get it to work. Find that being a bad trade off for losing touch
with that being said.. working in a shop type environment... Its a good performer for its price, having kodi for media, and its kickstand makes it very convenient
Sinyorksu answered you with all caps before 
#1168386197605855313 message
I thought he was trolling me on the E6 Max because he showed it with a touchscreen
A good working configured retroarch would be good like lao zhang does with iux
as long as jelos doesn't have the battery percentage issue, it should be also fine
I use the E6PLUS exclusively for Stardew Valley, but the reset button right next to the dpad is super frustrating. Any way to change it so it doesn’t turn off all the time? I’m on chaOS
Looking good seems the a527 is quite capable
yeah. seems that whole "a527 multicore score doesn't matter" take was wrong. Looks like it's blazing through GoW
glad to be proven wrong 😄
brother is getting 50fps average on 2x res 🔥
That bodes well for that tjdt80 model that's running the a527 as well for $199 you get an 8-in 4 to 3 aspect ratio
@river zenith I need this new dpad.
今時点で69.99ドルですが、セールで59.99ドルでゲット。
RK3566なのにAndroidが動いちゃう、しかもGoogle Play Storeも動いちゃってます。
https://s.click.aliexpress.com/e/_DdPsUHj
お値段の割に頑張りまくってるGAMEMT R6PLUSをサクッとレビュー
Sinyorksu may have, without much effort, beaten the odroid go ultra if he can also server up an emulation station image with the e6max
@river zenith Is this a new sku?
forgot to thank you for grabbing the files for us, this fixed my issue.
I finally have working battery levels again
E6 plus is not touchscreen either? Or just e5 plus no touch
Actually looks awesome in the vid
Is that a 30 fps game? What did you use to display stats at the top
just e5 plus
i read that flashing the e6 Plus firmware results in working touch. i dont know how true that is so i wouldn't recommend trying lol
nope. sleepy was half-awake when he said that. it has no touch
e6 plus and the upcoming e6 max have touch on the android end.
Yes its a 30fps game.. it's running as intended and played great. I'm using the Better Xcloud app for android and it has a feature for network stats
@fast scarab https://better-xcloud.github.io/
a short description of your website
My son is only 3 so I had to grab what footage I could when I captured it.. he doesn't really know how to control/play it yet
can you play ps2 with the e6 plus?
bare mininmum in order to play ps2games is powkiddy x28
but i would recommend new RP5
or RP4Pro
technically, yes. tastefully, no
gradius V will run fine. Thats about it
maximo yeah
How did you load it on there?
It's an APK file you download and install on android
I used a USBC to usb a adapter with a mouse
Once you have it setup you can control without touch or mouse
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 ENVEL USB C to USB Adapter, USB 3.0 to USB C Adapter, Type-C Male to USB Female OTG Converter, Compatible with Apple iWatch iPhone 13 14 15 Galaxy S24 iPad Air 4 5 Mini 6 https://a.co/d/93bKeZk
Special thanks to GameMT representative Sinyorksu for providing 64bit Android version for E6 Plus, for install to it AetherSX2 and play for you this amazing game! 😊
Thanks a lot for @hackaround for Jelos fork cHAos for E6 Plus and for everyone from #GameMT E6 & E6 Plus thread at Retro Handhelds Discord server!!!
For PortMaster community, plea...
Gradius V will run even on usual E6, and not only on plus 🙃
This is unbelievable, but console with 1Gb of Ram and RK3326 can do some of PS2 emulation on 64Bit Android!!! 💥🤯🤩🤯🤩👍
Console specs:
GameMT E6 Dualboot Linux CFW / Android 8.1 64bit, 1/8Gb, 640x480 no touch screen, OTG WiFi(Linux) /Mouse(Android) , Rockchip RK3326
Thanks to GameMT representative @Sinyorksu for providing 64bit Android fw to pl...
yeah, that doesnt run particulary well 😄
I know, but it runs on rk3326 after all, it's ps2 on rk3326 with 1gb of ram! 
Hey! Glad to see some gameMT peeps, I have an E5 and have been enjoying playing games on it and multiplayer! Has anyone been able to play N64 games or switch its OS/frontend?
How were you able to flash it? I would love to switch my E5 to a better OS/frontend!
Do you have a backup of the Stock firmware/OS? I would love to test if it would run on my E5
#1168386197605855313 message
@compact quartz do you have the regular e5 or e5 plus? Does it have 1 or 2 analog sticks?
I have the files to flash/upgrade the android on my gdrive
Just the E5 one stick, but I still kinda wanna test to see if it will run. Not sure if the Plus has a different chip?
@compact quartz yes.. the e5 plus uses different hardware
I don't have the image for the base model
Yeah, do you think the e5 plus frontend or firmware would run on the e5 base model? I mostly want to try N64 emulation on it
I doubt it.. it's completely different chipset I believe. I even tried e5 plus firmware on an e6 plus which uses the same and it didn't work
Dang yeah that makes sense :/ I got a few more SNES games working on it, but no N64, I even tried retro arch without changing OS/firmware and it didn’t work.
The E5 Plus frontend looks very similar to the base E5 which is why I’m hopeful but I might have to reach out to seller to try and get the firmware/frontend
i dont think n64 is going to end up working with any new type of firmware. if i recall.. there was a huge leap in performance and using a very low end on the regular e5
Does anyone have a link to the games that came with the e6 plus console?
@spice tundra well.. there are rom collections all over the internet
I want to leave it in factory condition to sell it
you don't really need the stock romset to sell it in such condition as long as the romset is scraped properly and of good quality, most people wouldn't think anything of it
plus i would be worried selling anything with pre-pirated content
I need it because there are people who just want to turn it on and play because they don't understand.
and that's what i'm saying
you don't need the stock game romset, just download an off-the-shelf one from the high seas
they're likely of a much higher quality anyway than the one gamemt offers
otherwise, you might need to ask sinyorksu for it, and he's usually hesitant to respond
百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固,支持教育网加速,支持手机端。注册使用百度网盘即可享受免费存储空间
Here are the games but I can't download them.
@spice tundra build your own set.. any service to download that for you wont be worth it since its so large and im sure its not permitted to share roms on this discord
Hey, I'm pretty new to cfw, is there a version of CHAOS that ran on the E6? not the E6 plus? Trying to make this thing little more than dookie for gba games mostly
@indigo fern https://github.com/tech4bot/AmberELEC/releases
that should be what your looking for
@summer aspen Thanks thats exactly what i'm looking for. could you tell me if I'm doing this right?
- download the zipped file
- unzip (using 7-zip)
- flash to sd card (using balenaetcher)
- just put the sd card into the console and turn it on?
i heard about having issues with etcher and rufus.. i use USB Image Tool which was recommended by ArkOS wiki
but yes.. those are the correct steps.. make sure to put the card in slot 1
Yeah, it keeps saying the disc image is corrupted and not flashing. And It's only got one slot so I don't think I'll mess that up
make sure to extract the file.. you should have an .img file at the end
not sure if you tryin to flash the img.gz?
yeah I'm trying to flash the .img not img.gz but still no luck
try using the usb image tool
with usb image tool.. click your sd card on the left then press the "restore" button and select the img file
ok im gonna give that a try
although I'm having another issue ive gotta resolve first. My pc isnt showing the sd card reader in my finder window. It shows up in when I look at disk management so idk whats up
id clean the sd card first
run diskpart
and clean the sd card
open command prompt and type diskpart
then enter "list disk"
see the number your sd card is on the list then type "select disk #" with # being the number of the sd card your system numbered it
then type "clean"
after that.. open disk manager and create a partition and format to create a drive. then you can flash it
make sure you enter the correct number of the sd card so you dont destroy data on a wrong drive
here is an example of how this system of mine is at.. since i know the sd card i have is 1.5tb so its number 5
diskpart is a powerful tool tho.. make sure you dont wipe the incorrect drive
yep, just cleaned it. those were perfect instructions, thanks so much
np
so I cleaned the disk and want to use the USB image tool you sent but it's not opening when I try to open application
also, how should I format the disk
open disk manager
and find the drive that says unallocated
right click it and select new simple volume
and just finish the steps.. doesnt matter how you format since your going to flash it but make sure you make the partition the whole size of the sd
then it should give your sd a drive letter
usb image tool should just open up. i believe it needs admin rights.. you can right click the exe and select run as admin
ok one last thing. do you know what the difference between these are? theyre the different img.gz files
gameMT_E6
gameMT_E6_new_display
Game_Console_R50S
not really... it should be one of the first 2. there was probably a production change and see which works for you
it should be the same os just for different hardware specs
cool. how long should it take to flash?
It shouldnt take long.. depends the size and speed of your card but probably a min or two
What is most current cfws for the regular e6 @mint ember
cHAos from May of 2024
I got the files flashed onto my SD card but when I put it in, it refuses to boot up or do anything like it's dead. I take out the sd card and it turns on fine
Did you try both versions of the e6 img files?
@indigo fern if you still having issues probably tag @candid ridge possibly he'd be able to help you out. I dont own a regular e6 and that should have been the cfw for it
@candid ridge could you possibly help me out?
Make sure you have the correct image for e6, try both old and new display, but if you got the console recently, probably is the new display. Use raspberry pi imager or balena etcher to write the image, use a different SD card brand. Try all the options and we can see then
ok thanks
just about tried everything you mentioned but still the same issue. Also it says its a XGO A500. Is that even the E6?
XGO a500?
that's the rk3128 model of the E6
no, that sku is basically a rarity and were scrapped units by gamemt
not very much, it runs android so you can try to modify it, but the original firmware developer locked it down pretty hard
shoot
Hi guys, can anyone tell me about which rk3566 devices that come with Android? And which ones have wifi issues?
E5+ and E6+? Do these have touchscreen?
e6+ does, e5+ doesn't
they both come with android, though their stock firmware isn't all that great
i don't know about wifi issues, you'd have to wait for the next person
I do not 😕
@hollow crag on the android 11 images WiFi works but someone released an android 13 for the e6 plus and 5g models WiFi doesn't work at all for it
#1168386197605855313 message
Thanks folks
I dont think these are available to purchase in the UK it seems :/
This just looks like scalping prices
@candid ridge Was the 64bit android version for the original e6 ever completed to a stage where it's available for me to try?
Who knows where you can buy the e5 plus? I can't find it on Ali...
Why are you asking him? He is the guy of cHAos, not Android 🙄
Do you use Dex mode as a pc?
isnt that what dex mode is supposed to do ?
Wait @hollow crag your UK?
E6 Plus Handheld Rk3566 Dual System Closed-Source game 5.0-Inch Touch High-Definition Large Screen Support Projection Boy Gift
https://a.aliexpress.com/_EwXpdpK
Most listings don’t use the GameMT branding for some reason
guys
my e5 plus arrived
a text woke me up from a cainiao delivery driver who had a hard time delivering the package and lo and behold there it was
Yeah, but never knew a person who in fact uses it
guys
the pink model is beautiful
much more pink than I thought it would be
I have to apply the screen protector now ugh
gud luk
nice
mb, I saw another guy had asked him about the same thing and assumed he was involved with the project
@hollow crag This is for the GameMT E5 Plus, I think this should work for the UK, or well, i tried with a UK VPN: https://www.aliexpress.com/item/1005007980796939.html
The GameMT E5 Plus is almost unsearchable for whatever reason, so I found my listing by finding the original, sold out listing and looking for image recognition matches on AliExpress. This listing is from the same one I bought from.
ok im trying to flash the firmware rn
the device isn't being recognized by my pc

like at all
i need some help 😔
ok finally i got it to work
let me write it all down for all the other noobs in the future
ok how the hell do i boot into jelos
i tried using the reboot2linux application but idk if my sd card is not being recognized or what
Ordered, thanks for the links
@hallow mesa https://a.aliexpress.com/_mN4d9rD
@paper veldt what you need help with?
thats what i have done
Does it boot into android?
mhm
Try installing the android2linux APK and run it
the reboot2linux application?
Yes
Seems like a problem with the flash..
i tried 2 sd cards
Which app you using to write img file?
win32diskimager
Try USB image tool
okay
okay
yeah, no luck
i used restore on usb image tool and selected the .img as the file
Using just 1 card in with the os?
Maybe use the other slot?
Idk 🤷♂️.. I can show a vid later with my process of it working
yep, mine boots into jelos if the sd card is in the second slot, odd since the first sd card slot works
maybe i got a weird unit or something
The slot near center or edge?
edge
Yea that's TF2. I don't have my jelos card setup ATM but that wasnt something I had to figure out. Out of curiosity, I'll verify my device later tonight.
At least you got it figured out and working 👍
Been on a journey getting syncthing setup on all my devices...
Android data folder is the worst.. lol
Setting up these retro devices to use the data folder isnt bad cause they are rooted and give you access.. but if you plan on syncing your mobile phone.. it's a headache
@paper veldt my device is the same.. jelos needs to be in TF2 to boot
huh, so it's normal
also, do you know of any shortcuts to go home/back?
i tried using sds100 keymapper, but since it uses accessibility permissions, it breaks the joystick in ppsspp
i found out by accident that M+K causes the d-pad to act like a mouse... without clicking functionality
oh i found it
M+T is the home shortcut
but what the fuck is the click button in mouse mode? 
where's the back button?
also i think i need to tape my dpad
the left button keeps getting mistaken for up
👍
Just don't do m+k.. I'll the reboot shortcut 😂.. unless you gotta
Back buttons is just the "B" bottom
Works for the most part.. in apps you have the controls mapped you have to exit with home button unless you have hotkeys setup. There might be a dedicated back shortcut but I'm not aware
took my e6 plus to work today. wrc psp runs are pretty great
👍
E6 plus great console to take anywhere.. less worried than something happening to my 556 or rp5
just finished taping the dpad up on my e5 plus
im getting less false inputs now
I’ve also been playing around with JelOS on this device, performance isn’t great on it I would say comparative to the chipset. Nestopia had some slowdown and there’s a weird version of Drastic included with the firmware that is all in Chinese and slows to a crawl on Animal Crossing.
luckily the original drastic emu does exist and seems to run much better than the modified version
you do have to change the controls a little though, since l3 for some reason is mapped to “touch” the screen, when the right analog moves the stylus
I think abxy might be swapped on the drastic emu too actually
ok i found out how to easily fix the standard drastic emulator's shitty keybinds 🐸
- SSH into your device
- Show all hidden files in your SSH interface (I am using Termius)
- Create a backup of
/storage/.config/drastic/config/drastic.cfg - Transfer the
drastic.cfgfile from/storage/.config/drastic_chn/config/to/storage/.config/drastic/config/drastic.cfg - Done
interesting
@paper veldt haven't messed with nds yet.. good to know
Tell me if there is a wi-fi fix on Android 13 gameMT e6 plus
hey guys
does anyone know where the tools folder is inside of jelos, i'd like to add a .sh file to it
🐸
@paper veldt remember I found it before.. don't remember off the top of my head
@near pier e6 plus models with 5g WiFi doesn't work on the android 13 builds
@summer aspen I know it doesn't work. I asked if it was fixed or not
No.. there hasn't been any updates
found it: /storage/.config/modules
this you @paper veldt ?
that’s my personal account
popular post im always weary of reddits strong opinions
there’s definitely a lot more attention to the post than I thought it would have
I guess the device is just really eye catching
You did a great write up 
guys I have a problem with my e6plus that just arrived....the joys don't work correctly if I try to set them via the Android app it doesn't work
@pure fossil what app are you trying to use your controls? You have to map them on every app
the joysticks only work on the vertical axis, they don't work horizontally, if I try to use them on the home screen, they emit a beep only if I move them vertically and they don't give any signal when moving them horizontally, the app available on Android to set them doesn't work
I have the normal e6 version but I bought the plus hoping it would be better but it seems much worse, I tried to configure it on winlator or retroarch but by moving the joystick to the right or left no signal arrives
Send it back and get a replacement. Sounds like you have a defective unit
Looks like newer units of the normal E6 now has an updated dpad
It looks like the d-pad they put into some batches of the original E5
Yeah, people started to receive units with new dpad approx a month ago
Do you have a connection with the developers? Maybe they can sell the dpad as a spare part?
They won't, sorry, but someone here posted link on AliExpress, where is possible to order it.
How to check the screen version before flashing? I just bought one unit with old screen with manufacture date 12/15/2024
Anyone know if the e6 plus gets the new dpad?
no way to tell just try both
If you talk about normal e6, try booting into safe mode. If it boot into android it means that you have old screen
New screen e6 stay into gamemt app after booting in safe mode
Check out MTGAME’s shop on TikTok! https://vt.tiktok.com/ZTYseNun5/?page=TikTokShop
link is broken. either that, or my malware protection is just nuking it on sight
it’s like a Linux based system yeah
E5P 64-bit Android system 12-24 Link: https://pan.baidu.com/s/1NnydxbpIhR6w-9QHvpAOSw?pwd=bf9h Extraction code: bf9h
Can not download from baidu, someone can help
百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固,支持教育网加速,支持手机端。注册使用百度网盘即可享受免费存储空间
The link requires a Baidu account. Does this mean that if I use a VPN to fake a China IP, I can download without needing an account?
There is a free service to provide fake China phone numer as they require to create account
perhaps ask @fringe wren since they were the one who reuploaded android 20241021 for us?
Use https://baidudownloader.com/
Not a free service but i used it in the past and quick turn around
why changed? New screen is better than old screen?
i will upload it on gdrive asap. didn't know the changelog tho.
what a speed
guess like we will fuck around and find out
I’ll be installing it, anyway
oh wow
😬
E5P ANDROID64 241224 ver - rk3566_mt_e5p_中文_gms_wifi_android64_tf_vol_v2_241224.rar
https://drive.google.com/file/d/10AKJTxaVtVi1hmUwGLGFNy0i60Q-uGgg/view?usp=drive_link
thanks kitty
now bobby’s flashing the image onto the device
hmm, it seems to be identical to build 1021
The non plus? No i guess
@river zenith any update on when this will release? #1168386197605855313 message
Or when I can purchase the e6 plus with this dpad #1168386197605855313 message
https://youtu.be/zvbUzY2ku4k?si=-SAoRqEsXgMtB_Ug
GameMT E6max Test Mix GamePlay GameMT E6max
Chip A527 octa-core a55
unlimited Pure Android with touch
4GB+32RAM
Screen 720 x 1280 pixel.
Soon
GameMT E6max Test Mix GamePlay GameMT E6max
Chip A527 octa-core a55
unlimited Pure Android with touch
4GB+32RAM
Screen 720 x 1280 pixel.
Soon
来源浪子玩数码
The new version is called the e6 Max?
I have no idea. That’s what the video said it was
That channel has a few videos of it
The new dpad does look more appealing
there is a vita mod you can do to the others
not really mod.. but attach a different dpad ontop
Lol
I'd be so down for the e5 if the right side wasn't there
Like if it was even on all sides
Can we have this Handheld in all the same color ways as the E6 Plus! 🤩
hey guys, i want to buy a carrying bag for my e6 plus. i want something little, but with enough space for the gamepads and the mini hdmi cable
order link? i want to put arrows on my e6plus dpad
@muted moon
https://a.aliexpress.com/_mPC7ql9
neat, thx
I was thinking about sanding the dpad flat and applying that
I've had the e6 plus sitting on the side of my desk for the last 3 days or so, running GammaOS core
Bro why is the battery not draining on this thing
I'm shocked to still see it at 86% remaining
I just need to fixup the input driver and it's good to ship
Oh and maybe add LED options
thats quite unheard for 3566
Part of me wonders of this is bad reporting, but will keep an eye on it...
the battery life is generally good in the tablet version of android 11 64-bit. I just leave mine in sleep mode all the time when not using it. both it and my Fire8+ can sit unused for days and not move a percent
i find the e6 plus battery to be pretty good
my e5 plus when from 51% to 35% overnight on android
@hollow crag this drive link has the apk for the color on and off for leds if you don’t already have it https://drive.google.com/drive/mobile/folders/1RY9GQsurpvXlWe-VSK2nAx5n21LLfgAd?usp=drive_link
Or maybe I’m off. It has the reboot to Linux
I just received the E5 Plus, but the touchscreen isn't responding on Android. How can I enable it, or does it not support touch at all?
The e6 plus is the only model with touch I believe
in retroarch, psp, and drastic individually.
for standalone linux emulators, you may have to edit the emuelec ini files
Thanks, I'll give it a try. I still don't understand why they designed the layout this way, especially the XY order
What GammaOS have different from JELOS? If the standalone emulators has working controls I will use it 😛
?
GammaOS is Android
JelOS is Linux
very different
I'm asking because I don't know 😬
Guys I need the procedure to update the e6plus, where can I find it? Thank you
@summer aspen do you have the file for the previous gamemt e5+ firmware?
the newest one does not have the tools needed to flash it
someone on reddit is having issues because of that
Np.. haven't flashed the newer image but didn't have issues with the first
@pure fossil did you get your e6p flashed?
@paper veldt found the link?
Well.. rip to my e5p... Not sure what happened. Was playing gamepass and screen started to get blurry. Restarted the device and this what I got 🤷♂️
Always put it back in box and carried it around in the oe packaging
what the hell
Idk.. at this point it's just a shelf/book end piece. I doubt there is any warranty on a device like this. Was a great media player while it lasted but not very long.
Check your screen ribbon cable I has same issue on my first e6plus
Not that badly mind you
how about trying linuxos-jelos mod?
I just opened it and checked ribbons cable and it's not it
The boot logo is messed up too so doesn't seem to be the os
Figured while I'm in here to takes pics if someone is interested
Same with jelos on initializing/loading/ and front end
Seems like the driver board of the screen is bad? It is attached tho.. colors and what's on the screen affects the way it looks
That looks like condensation somehow got in it was it in any sort of extreme temperature difference
Nope.. was in my travel bag with my other handhelds. Always with me and not exposed to heat or moisture
Well.. I checked my order page and saw it was 90 days to return and sent my photos. They accepted the return and gave me a label. At least that was very smooth. 👍
convenient that it wound up falling in that period
Yea.. ordered it on 11/14 so it was close. First time returning on AliExpress so far it's pretty smooth. Kinda sucks cause this handheld was very convenient on propped up media streaming. I was actually about to post a video of playing No Man's Sky on it till it went south
Now gotta find the original SD card and reset it back to default.. glad the screen is manageable than sending a device back with my account logged in.
thanks I solved it, for now I use android11 64 with daijisho, and kaos but the dophin and aethersx2 emulators are very slow.my e6plus is defective and the sticks don't work but I can still use it for emulators
@pure fossil so the sticks map correctly in the emulators but don't work on the os/frontend?
And yes.. unfortunately the rk3566 isn't powerful enough for PS2 and gc/Wii beside a few light games or using a bit of frameskip
no they are not mapped correctly never even in the original software they do not work
right and left don't work in both sticks, while if up and down they go diagonally, and it doesn't depend on the sticks because if I change them the new ones also have the same problem
stick up ....signal ..diagonal sx-up
stick down signal diagonal down-dx
fortunately I was refunded
🤷♂️ I use it with the d-pad for games to dreamcast and psp it works great.
@summer aspen do you know how to insert a presentation video or how you can change the background music of jelos?
I came across it before.. wasn't something I was after and didn't take note of it. Have to prod through the os again to see if I find it
I think the background music can be changed in the menus? Not sure.. I just prefer no music at all
I found 4 images of the SD card for the e6plus, the first jelos (kaos) does not have the presentation video enabled even if it is in the image, the other three are from gamemt but two have no music in the menu and the third has the video and music does not use all the space in the rom but only 5gb leaving 50gb unpartitioned. but in all of them there is no way to load mp3s and use them in the menu . thanks anyway
I'll try to find something from the Russian guys, I know they're working on some Linux images
I've not touched it since this message, it's still currently alive, at 14%
Longest battery standby rk3566 I've seen, incredible
That's a week 😮
But on linux...☹️
#1168386197605855313 message 🤔
Power consumption in linux on e6 plus is very high.
So I got a Jellymini 5, is that the E5
And if so
Is there CFW to save this heinous thing
normal e5 nope
RIP
E6 plus 32bit can’t boot into Linux OS?
Install jelos on sd card
How to add other ones, just see NeoGeo only
Try putting rom into games folder in GAMES Partition
There is no difference. The comrade from 4pda who unpacked this application did not see any libraries for 32 bits there.
But one of the versions didn't work for me either (on 64 bits os).
20240712 or other, I don't remember
Sorry, they shouldn't be there 🤪
I downloaded a version modified by the Russian guys taken from x55 and although it is poorly optimized it allowed me to download new frontends, there are many and really well made, I prefer the batocera versions with the carousel, I also managed to change the music in the background but I applied everything to the new version of July 20th taken from gamemt which has the initial video and is better optimized.
Nice.. gg. Maybe you can post a few images or vids of your setup 👍 @pure fossil
cool
Is someone noticed, that there is e5 plus fw updates from 28.12.2024? But it needs to be downloaded from baidu as usual😅
No, you can't, as don't have one, sorry 😆
Please ask @river zenith for release date
explanation to modify the jelos frondent step by step . step one download this image https://webshare.cz/#/file/TPqYalYIWa/gamemtos-rk3566-x55-aarch64-20241227-img this image allows you to download and install the various themes for the E6plus but it's quite slow. but to be able to insert games and modify the other images you must use disk genius as in the other images. after downloading the theme, put the SD card in the reader and launch diskgenius, in the game-internal\rom folder you will find a themes folder, copy it and save it on the PC. inside this folder there are all the themes you have downloaded. now prepare the SD with an image of Jelos with the initial video, I used this GameMT E6 Plus (20240720)after placing it in the console and installing it, put it back in the reader and using diskgenius copy the themes salavat folder on the PC to the SD card in this location storage\config\emulationstation\ the folder is already present but overwrite it. now when you put the SD card in the console you will see all the downloaded themes
Úvod | Webshare.cz - moderní úložiště pro Vaše data
now i'm intrigued! which version works and how do i install it? 🙂
People rag on and side-eye sinyorksu's stuff, but the man does legitimately good work for a solo-dev given what he can afford.
I like @river zenith . I tried taking apart my e6 plus and broke it. I’m waiting eagerly to get the e6 max and love what he is doing. The dpad, 2 gig of ram and not having the play store was my biggest complaints. The e6 max will fix all of it. The only thing it will be missing is native button mapping. Ergonomics are fantastic.
Sinyorksu is great he has tried to take the communities opinions into consideration
@topaz shoal the e6 plus has the play store btw
@mint ember that seems to be the ROM files not the fw
Oh, I see.. Haven't checked contents 😅
I haven't checked the files within myself but browsing the webpage seems to be the ROM files as one is about 64gb and other 128gb download
the sleep mode on the e5 plus on Linux is kind of insane ngl
it’s been sleeping for at least 4 days while on balatro, and it’s at 51% reported
is there any android apk to change led lights? E6plus
@river zenith has the pricing for g6 max been decided yet?
Hello all. I’m new to the group and looking for advice.
I have an E6 that is running the chaos firmware. After flashing the image, I can no longer see the drive in windows.
It works in the handheld with no issues, but I’m not really sure how to get any files onto the card.
I could ultimately just ssh, but I’d much rather just use the SD card to drag and drop at will. If it’s possible at least.
This is normal
Just use wifi ssh to copy files
Or usb otg flash drive on console
Use wifi and samba server
check network settings
No luck getting WiFi to work on the device as of now.
Guess I could grab an adapter for a flash drive I have laying around. Great idea fellas. Cheers!
Also a question unrelated to tech support lol
I’m new to the world of cheap plentiful game handhelds, but used to be pretty well into running unofficial android roms, root, etc on my phones.
I used to hang out on XDA a lot to read/learn. anywhere similar to that I can read more related to the handheld side?
Is it possible to use this dongle? I would like try to use 5GHZ (xcloud xbox)?
@candid ridge
@all
In what device? In what OS?
If you don’t know which chipset is using, then don’t buy it as are at least 5 different ones with same shell. Under android there are no wifi drivers so is useless. Also the port is usb 2.0 so take in account the limit of the speed
E6 Plus
For E6 plus. Otg adapter + dongle wifi
Otg type c has 2.0 speed?
That is the limitation of the device, is not important which otg are you using
And if you want to use it on android, there is no wifi drivers except for what is build-in
hi, i just bought the e6plus . can someone help me flash chaos into my e6plus? i bought a new sd card for roms and firmware. also after flashing chaos will the stock android work like it should? cuz i don't plan on upgrading the android firmware.
cHAos boot fully from sd card is not affecting android
Download the chaos image, download the software balena etcher. Pop your sd card in your computer, and click the 3 buttons
Thought I'd share my latest mod. My cell phone and most of my daily devices uses wireless charging and thought I add it to my e6 plus. 👍
Internal mod using:
https://a.aliexpress.com/_ExLzqNa
Help me, I deleted the games files from memory and I don't know how to recover them. Device Name (E6 plus)
@candid ridge
no one can help you because is against the rules. I can only help you with issues related to emulators/OS etc, but not with roms.
Are you using the stock launcher?
No Android
Well, my device is currently running Android and I want to switch to another operating system, can I?
These are the specifications of the device
there is a jelos system for this device afaik
I tried to install it, but when I unplug the system memory, everything goes back to normal
you mean the sd card?
Yes
that's kind of what it's supposed to do 😅
the linux system is stored on the sd card and should take up one of your two sd card slots
the other sd card slot is for an sd card holds games for both android and linux
on my e5 plus, there is an app for android that boots you into linux, and a menu for linux that boots you into android
should be similar for the e6 plus
I can't turn it into a full-fledged Linux system.
what do you mean by that 🤔
I mean making it a native system like Android 🙂
i don't think this device is designed to run linux on the internal storage 😅
just keep the linux sd card inside, it will be fine
You said you have the same device as me, has your device been modified or not?
If not, can you give me a copy of your files?
.
i have the e5 plus, not the e6 plus
they're similar, but my device is of a different design and has no touch screen
Well, the files are the same .؟
Hi everyone. New to the scene. I have just received a E6 plus. Flashed the A13 but no wifi. Any updates/driver/fixes for that issue?
Interestingly the e5 plus doesn't thermal throttle as much as the miyoo flip.
I've also had to unlock higher ddr speeds, it was capped artificially at 780mhz. Now at 1056mhz.
This benchmark of Sonic Adventure / DC usually tests the limit of this SOC, getting nearly full speed which is good
omg bobby is so excited
for comparison, miyoo flip: #1321892456551157841 message
This is me purposely running without frameskip so I can benchmark.
the lack of thermal throttling is interesting
i don't see anything particularly special about the e5 plus internals
it may just thermal throttle later
the flip is pretty densely packed, with the battery being used as a heatsink
(literally).
#1168386197605855313 message
Pictures of the internals of the e5 plus. No heatsink but it's placed in an open space above the battery.. probably what's helping the thermal throttle. Not sure if you can fit something small on it
Sit at or just above the rumble motor
the e6 plus uses the touchscreen as a heatsink lol
As with most mobile phones so I think that’s pretty neat 🤣
so the fps at 2x resolution swings between 30 and 43.
Will be neat to see how it swings on the A527 version.
https://www.youtube.com/watch?v=iR10vC49oOQ
Testing out the rk3566 version of the E6 before the A527 version comes out.
fps swings between 30 and 43
But yeah @bronze citrus this is kind of what I'm looking forward to seeing a difference in for a527/a523 stuff. technically, the a52X series has a weaker gpu despite better multicore
some e6max media
Teardown
https://www.bilibili.com/video/BV13jfVY2EZC/?
review
https://www.bilibili.com/video/BV1xzfhY9E9L/?
keymapping with Panda Gamepad Pro
https://www.bilibili.com/video/BV1NikZYXESV/?
genshin impact performance
https://www.bilibili.com/video/BV1bTfzYmE1t/?
Well you're giving specific PSP games, whereas that GoW demo is a benchmark for the whole platform — that's why to me this just looks like an incremental upgrade. As in "still doesn't play the entire PSP library, but plays more of it than RK3566".
And, well, kinda hard to get excited about this. N64/DC/PSP has been a line we've been dancing around in this class of devices for way too long.
Also, IIRC there is currently little Linux support for this, so we're talking about an Android handheld. There are at least two companies working on cheap PSP-capable Android devices right now (MagicX and Helegaly). So again, very hard to get excited.
Another factor I just realized about this: doesn't the Valhall arch used in the G57 have proper support for something unlike the Bifrost arch in the RK3566's G52?
(Was it Vulkan?)
i agree, there are definitely devices even in my collection that do all three of those systems without any issues. I guess it's kind of exciting because the price for it in china right now is 399 yuan(~55usd).
I’m excited. There isn’t a good touchscreen Android device around $100. The Rp2s is fantastic but it’ square and has a too small of screen, and isn’t 16x9.
The only real competitor that will play all the n64 catalog and all Dreamcast (which I assume the e6 max will)
Closest was any of the other rg3566 devices but none had the ergonomics of the e6plus or a touch screen
If they fix the dpad, and have screen mapping, and release Android like one of their later builds, it will be great
Like which ones?
Hello everyone, E6 PLUS is running PSP and some emulators, is it possible to run a PS2 emulator
Both the odroid go ultra and rgb10max3pro, the rp2s, the original rp3(which you can find for dirt cheap on ebay), x18s/x28, the rg552...
yes
#1225465583366180874 message
does it work on monitors or tv's? it shows a ruined screen after connecting to a tv
Run yes, playable no
playable yes, some of 😉
the a527 will be able to do more. ps2 favors more threads. credit, i don't see the e6max going above 1x resolution, even at 848x480 widescreen
Don't give hope to these guys, they don't want simple games, they want God of War 🤣
😂😂😂😂👍🏻.
See also: Dirt 2 PSP
(Wii version is basically the same game, but I feel like that'll be even more taxing!)
If so, they supposed to make questions more clear, like: "is this console can play ps2 god of war or shadow of colossus, or killzone or crysis, etc" 
One of my dreams is for a device that can play GC stuff, but that requires I go to Android stuff for that
Not really, like for example, rp5 on rocknix can play gc 100%
Some of us want .hack fragment for ps2 to at least work
True
Maybe shining force exa
Wii version doesn't have broken physics
my god, if you drift a corner and hit a stone wrong, you will launch into the upper atmosphere in the psp version
Heh
oh are those buttons microswitches? 😮
So yeah, it looks like the E5 Plus can hit DDR speeds of 1056Mhz, whilst the E6 Plus can only do 780Mhz. I just tried different loaders on the E6 Plus, the 1056Mhz fails. Doesn't boot.
Just something to consider when playing higher end systems
That’s odd… could it be a quirk of your unit?
It would explain why the e5 plus has it locked to 780mhz anyways.
I think @elfin nimbus actually encountered this on his & others units, so yeah it's not a quirk
anyone know anything about the E5 or have back up files? I fucked up lol
Or can I put another fermware on it?
That is super weird. Does that mean they put lower ram in it?
Is your unit a 2.4ghz wifi model? or 5ghz? New Dpad? I’m guessing these already had a couple of revisions.
Maybe
hell they dont even use hall stick on the left analogs 😅
they definitely downgraded that batch
Two steps forward one step back
Isn't this dpad an upgrade?
I bough my last month, but since the last week, when on android the wifi dosent work.
Does anyone have the Android rom to reinstall it, I have the E6 Plus
Or know how to fix the wifi?
Its possible to update the gelos to rocknix or other bether OS on the E6 Plus?
how would you rate that dpad?
Pretty good actually
The sticks are not great, prone to snapping.
I may change the kernel on this and use my own driver, unless the issue is the sticks themselves
I have the 2.4ghz model with the better sticks and meh xbox disc dpad
at least the usb-c is fast. it's good for recording video through scrCpy
I have a e6 plus with 2 Hall effect sticks so hopefully i shouldn’t have issues with them strange that there’s one with none and newer dpad though
I also have a 2.4ghz that refused to run any updated updates
Notime2d8’s rom would crash during setup on that model
Can someone explain the different revisions of the pro? I recently ordered one "for parts " from ebay as fun little repair project and I want to know what I'm looking at when I start work on it. Thanks!
hey guys i have problems downloading android 13 for e6 plus. How can i enter to the loader mode
Thanks in advance
the pro doesn't exist? there's only various revisions of the plus model
what should i do now. it says no device found
okay i finally installed the android 13 on my e6 plus. Please if someone can provide me the led lights apk
ahh, typo on my part! I did mean the Plus model!
to enter ina boot load mode you should pre the volume plus and on togheter and updater will find your device
thanks
Now, i have android installed, but someone had a bug that retroarch recognse the handheld like there are 2 gamepads?
i have timbox telecomando and singleadc_joypad
thanks in advance
its working your wifi?
yes
wich version are you using?
android 13 no gms

why would they do that lol
