Incorrectly drawn path RALO4B BIKF

[wanton trench]

I am getting incorrect LNAV pathing on the RALO4B departure out of BIKF. The link shows what was drawn versus what the correct path should look like as per the charts
#chat message

[late creek]

Stickied Message

If you are having an issue with Experimental or cFMS LNAV / VNAV, please search for similar issues prior to posting your issue.

If you are not using Experimental, please use #a32nx-support

Useful Links:
Install Guide
Known Issues
Beginner Guide
Custom Autopilot
Custom Flight Management System
Throttle Calibration Guide
LNAV/VNAV Guide

Support for Experimental is not guaranteed.

[thick plank]

What did the line draw look like when you departed? Did it fly the original line draw or more like the charted departure? Try putting a lower speed entry at the first waypoint (say 200kts) as this may create a better draw. They are all fly by waypoints and the calculated line draw may be using a higher speed ie 250 kts which could make following the published departure challenging.