puchi-ble not recognized as storage | ZMK | Page 1

broken agate May 12, 2023, 11:55 AM

#

Hello, I'm building a corne split keyboard with puchi-ble.

I've problem with flashing one microcontroller. One of these doesn't get recognized as storage. I try to enter the Bootloader.... the blue LED is blinking fast. The other that gets detect correctly the LED is blinking much slower. If I start it normaly it appears as a bluetooth device but I can't connect. (The cable is fine).

Has any one a idea what I can do?

(Tested on Mac Silicon & Mac Intel - same issue on both)

Thanks.

ember umbra May 12, 2023, 1:10 PM

#

Fast blinking means it can't find a host over USB. Usually, this is a problem with the cable but could also indicate a damaged port.

broken agate May 12, 2023, 1:28 PM

#

The cable is working fine with the other controller...

urban urchin May 12, 2023, 7:13 PM

#

Can you try to rotate the cable on the puchi side (180deg)?

#puchi-ble not recognized as storage