help-forum
issues getting oled to work with my config - with the corne build it works
Need help enabling ZMK Studio
A bit of confusion on how to get underglow working.
wrong layers being activated via <
AliExpress Corne Flashing
[SOLVED] Studio errors "Failed to connect to the chosen device"
Nice!View Issues
[RESOLVED] attempting to change GPIO assignment in firmware
peripheral cirque I2C on kyria and n!n
[SOLVED] Studio says "Failed to connect to the chosen device"
4 keys not working on master side. Split handwired.
hardware
nicenano! v2 bluetooth pairing issue
Error: Process completed with exit code 1.
cirque trackpad on kyria and nice!nano
How do I get west to use an old version of zephyr?
Direct vs Matrix Mapping - Which is optimal?
Hand-wired Corne types while plugged in, but wont type on battery?
Need help getting hold-tap working with bluetooth
keymaps
How to reasign pins in config files?
Is uint8_t battery_level in a 0~100 range?
im having some rotary encoder problems
Thumb Behaviour - SQT if tapped, Layer if held, K_CANCEL if tapped whilst a sticky modifier is ON
< doesn't work
No mouse movement PMW3610
keymaps are tweaking unless i am
Help enabling soft off with a dedicated key for waking
keymaps
bluetooth
Help, my keys matrix is shifted.
[solved] build fails for tap-dance w. autoshift macro
keymaps
Questions about creating a keyboard using charlieplexing.
A lot of keys are being pressed at the same time until I am physically pressing all of them.
hardware
Is there a way to see what column/row goes to what pin?
Battery Reporting with MAX17048 Fuel Gauge IC
boards/shields
hardware
Bootloader issue w/ NiceNanoV2
Cannot Build Artifact on Github
keypad layer not working
cannot access layers other than default
Force a pin low to create a virtual ground for an encoder
NiceNano crashing as soon as I install ZMK files
bluetooth
hardware
Cygnus Wireless Split - Only 1 Key Working on Each Half
Trying to put urchin in my own zmk-config
boards/shields
keymaps
RGB not working on custom nrf52840 board
boards/shields
hardware
Dongle builds kb does not
Wiring Power Switch to NiceNano
Error when trying to build firmware files for custom shield
Troubleshooting repeat key presses
I replaced the nice!nano in the master side of my split kb
Left Half Column Unresponsive
Custom Board Definition
right half firmware
boards/shields
Github actions keep failing to build for sofle on fresh install.