I unfortunately don’t have any pictures but many times I’ve failed with printing Bambi Asa on a p1s. After I fixed the kinks with bed adhesion (unfortunately used a bit of glue), I actually had my bed warp as the issue… I heard a grinding noise and came over to see my bed was warping on all sides but the print was fully stuck to the bed. Could this be the gold textured PEI from Bambu isn’t really meant for ASA high temps? I also thought maybe the print was warping but the adhesion was so well it actually lifted the plate from the magnet.
#Asa issues
mental dagger
wind bisonBOT
Hey @mental dagger, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.
thin marten
Asa is tricky you need to dry it even if new and if the room is only a little cold i had to slow down to 30mm/s
spark tinsel
some modern ASA filaments are as easy to print with as PLA due to certain additives. Spectrum ASA 275 and Qidi high speed ASA print as easy as PLA at 250-300 mm/s just use your HS PLA settings and add 20 degrees C to the nozzle temp and bed temp.
Qidi even provides a little table for the temps for certsin speed ranges on the spool.
it's just a bit more expensive ($30-$35 /Kg)