#what to use for sticking PETG to acrylic?

4 messages · Page 1 of 1 (latest)

gaunt radish
#

Looking online almost all the suggestions for sticking PETG to acrylic seem to only be available in the US - anyone got any good UK/EU solutions for holding PETG prints against a piece of dark acrylic?

Thankfully not too worried about keeping the acrylic transparent as I am using black, happy to sand a bit to rough the surface up if that will help as well.

3M SF100

ACRI Bond 120

dichloromethane

plasticWeld

Acrylic Technologies Australia
ACRI-BOND 120 - Acrylic Technologies Australia

Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI- BOND 105 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue.

EMA Plastic Weld Glue Cement Glue For Hard To Stick Plastics Weald

This Plastic Adhesive Bonds All Normal Model Building Plastics. It Has A Long Shelf Life, Is Fast Acting And Sticks Within Seconds. It Has A Water Like Consistency And It Is Therefore Advisable To Hold Or Clamp The Surfaces To Be Glued Together And Apply The Glue With A Brush Or Applicator. Use T...

Dichloromethane Acrylic Adhesive

Suitable for extruded acrylic
Supplied with an application syringe
For indoor applications only

glad parcelBOT
#

Hey @gaunt radish, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

gaunt radish
#

Should add it's for indoor use, trying to glue some light elements to an acrylic base attached to a ceiling

hearty turret