✅ - Orca Slicer K1 Max settings

[digital oriole]

I'm having trouble with tree supports on my prints. I want to reduce the number of individual trees, make them easier to remove, and strengthen the rafts - by potentially making them larger covering multiple trees. Ideally, I'd like a raft that prevents the nozzle from knocking over the trees and causing print failures. I've adjusted settings but need help optimizing tree supports, improving the raft, and avoiding tight fusion with the print. Additional screenshots can be provided if necessary. Fairly new to the orca slicer.

[teal pike]

Hey @digital oriole, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

[patent kestrel]

While not really a true answer to your direct question, I was having issues with my k1 max and Orca with adhesion especially with rafts and trees. After TONS of tests and calibrations, I tried a new build plate and it solved everything! I was using a creality B plate (textured PEI) and it just stopped sticking. I got one off aliexpress and I have not had an issue since! I also adjusted z-offset manually so it really presses into the textured surface with very little first layer artificing (I don't care about a little if it makes it stick better, I'm sanding all this stuff anyway). If you wanna try it, here is the one that I got and its life changing for me! https://www.aliexpress.us/item/3256805742985895.html?spm=a2g0o.order_list.order_list_main.5.1b501802MwLHe8&gatewayAdapt=glo2usa

[teal pike]

This thread is closed now :white_check_mark: