1mm nozzle | Frankly Built's 3D Printing & Cosplay Community | Page 1

sharp tree Jul 17, 2023, 1:37 PM

#

hiya was just wondering does anyone know how to get a 1mm nozzle to adhere prints to the bed, i have limited time of when i can print and the 1mm speeds it up so i can print everything in that time, i am just struggling to print properly, don't know if it is my hot end not being hot enough to support it or what, but everything i have printed has failed, any advice would be greatly appreciated it my first time using a nozzle other than a 0.4, ive printed on the .4 for about 3 years

dim rapidsBOT Jul 17, 2023, 1:37 PM

#

Hey @sharp tree, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

daring sierra Jul 17, 2023, 1:40 PM

#

You’re going to be hard pressed to print with that nozzle on most of these machines

sharp tree Jul 17, 2023, 1:44 PM

#

ah

daring sierra Jul 17, 2023, 1:44 PM

#

You didn’t mention which machine you’re using

sharp tree Jul 17, 2023, 1:44 PM

#

voxelab aquilla

daring sierra Jul 17, 2023, 1:44 PM

#

That’s an ender clone. Not many people have luck with that nozzle size on those

#

I’d say the vast majority of us use .6

sharp tree Jul 17, 2023, 1:45 PM

#

okay, ive just ordered a set of nozzles going from .2 to .8 to test them

daring sierra Jul 17, 2023, 1:46 PM

#

Honestly for these .6 seems to be the sweet spot

sharp tree Jul 17, 2023, 1:46 PM

#

ah okay i'll give it a go first then

#1mm nozzle