✅ - How do I get rid of these lines

[finite summit]

I've noticed that the lines only start and stop right before and after printing the letters for the calibration cube, and I don't know how to get rid of them. This is with PLA printing at 200 with a bed temp of 60 and a speed of 50

[crimson crystal]

Hey @finite summit, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

[long estuary]

Ironing to change your life
https://all3dp.com/2/cura-ironing-3d-printing-ironing/

[upper mica]

ironing will only help the z(top) part of the cube. what does the cube measure out as?

[drifting moat]

Banding is usually caused by belts being loose. You have some curling too, so your bed is probably not leveled.

[vale oar]

It also looks to me like under extrusion or temperature fluctuations (see the link).

https://www.3dsourced.com/rigid-ink/ultimate-3d-printing-troubleshooting-guide/

[icy lance]

or you have a clog also plus belts

[crimson crystal]

This thread is closed now :white_check_mark: