#sender 3 s1 pro abl issue

35 messages · Page 1 of 1 (latest)

regal hound
#

Abl problems on ended 3 s1 pro

leaden capeBOT
#

Hey @regal hound, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.

left fable
#

so you tried eveyrthing I mentioned?

regal hound
#

I believe so

left fable
regal hound
#

I have also replaced the cable to the extruder, the extruded main board, and the main motherboard.

left fable
#

This is gonna sound really dumb but when you leveld it have you tried compressing the springs all the way and leveling from there

#

because the way you level this matters

#

basically the way I do it is I compress the springs all the way down, let it auto level then do a manual level

regal hound
#

I have tried that and about 4 other methods for leveling the bed

#

I think I may of tried everything

left fable
#

cause your printer still isnt working

#

so

#

hmmm

regal hound
#

I don’t know if any other part that could cause the issue

#

So it must be something with the structure or something

left fable
left fable
#

if the frame isnt squared properly this issue will occur

regal hound
#

I won’t be where my is printer for a bit

left fable
#

Ok just let me know when you get to it again

#

but

#

I want you to try something

#

take a straight right edge and place it where it is flat against the base of the printer and the frame

#

then take a flashlight and see if you can see any gaps

regal hound
#

Check back here Sunday afternoon and I should be on

left fable
left fable
#

@regal hound you on?

regal hound
left fable
regal hound
#

I just left my house

#

Sorry

left fable