raw lance
Can any one help or explain how I can adjust this without affecting the rest of the model?
I need the section marked by red arrows to be the same width as the part marked by blue, the problem is the line the yellow arrow is pointing to is angled to high. I also need to move the arc the purple arrow is pointing to, so then the area marked by the pink arrows is the same all around.
sullen anvilBOT
Hey @raw lance, thank you for contributing to this forum.
Please provide as much information (images, video, description) as you can. This will increase the chance that someone can help you with your issue.
Use the Close button when your issue is resolved.
safe knoll
to me it seems, solving the issue with the pink and purple arrows will solve the others too. Is that right ?
if yes, you should select the line that makes the circle imperfect (the purple line of verticies), select it and move and rotate it around until the circle looks fine
so this is the basic problem you have:
selecting those and moving them around will solve all
to make the "moving around" perfect, you can do this:
select the inner ring -> shift d to duplicate -> press p to seperate and choose "selection"
now if you switch to object mode you can select that smaller ring
and scale it up to the outer ring
then select the big model again -> go back into edit mode -> now you have a perfect guideline
(might need to move the upper vertex down to change the width of the left channel
done
hope this helped