Btt 35 and Fly cdy-V2 Temp problem | Reprapfirmware, DSF and DWC | Page 1

manic horizon Feb 7, 2025, 5:08 PM

#

Hey everyone , First things first I am running RRF 3.5.0 on my Fly CDY-V2 and my display is flashed in the way it needs to. Also i can send the Commands to change the Temperature by terminal but not over the normal. Furthermore i can't see the G-code files that are on the micro sd on the Printer. I already tried different boudrates. Is there anyone that has a solution for that?

robust iron Feb 7, 2025, 5:39 PM

#

Which firmware version did you flash? What repo was it from?

manic horizon Feb 7, 2025, 6:29 PM

#

BIGTREE_GD_TFT35_V3.0.2.7.x.bin is the Firmware version and I ordered it from Amazon Germany when i cant tell you because it's been a while but i guess around 2020-2021. What i found out trough trial and error is that i need to press the nobe until it goes into the page where i can change to Marlin Mode and than repress Touch mode

robust iron Feb 7, 2025, 8:56 PM

#

Best to try the kissorland fork https://github.com/kisslorand/BTT-TFT-FW/issues/19

GitHub

Compatibility issue with RRF 3.5.4 · Issue #19 · kisslorand/BTT-TFT...

After debugging with RRF 3.5.4 with a BigTreeTech SKR2 controller and the TFT50 V3.0.1. The only Gcode command that work are M105 and M92 during startup and screen reset and the Estop M112. Everyth...

#

Post on that issue and ask for a build for your screen

#Btt 35 and Fly cdy-V2 Temp problem