#ESP32 wifi module can not handle second connection
tepid sentinel
next garnet
What is that output showing? Your previous M122 post showed that you have the latest non-beta version of the firmware installed. I'm not sure what else you are asking. If you want to try the beta WiFi firmware there is a build available here: https://drive.google.com/drive/folders/1BdrZvW9FDspIA3ODMMTrE4s2Wl01Lx8h?usp=sharing
The file you need is: DuetWifiServer_32-2.1beta7-01.bin. I would not recommend that you install any of the other files from that share. Note that you may need to reenter your WiFi settings after installing this version of the firmware.
I've no idea if it will help with your problems, the sort of issues you are having almost always turn out to be a problem of compatibility between the WiFi router and the esp. If you still find you are having problems that did not exist with your 8266 module you may need to switch back to using that.
tepid sentinel
ok thanks , ill try the beta file, cheers
@next garnet ok beta loaded , The Blue LED is flashing quite quickly is this normal?
next garnet
It does that when it is reset. So yes it is normal.
tepid sentinel
not on reset but after the connectin is made
next garnet
But it should only do it for a short time, it then flashes to show network activity, so if you are accessing it, it will flash.
tepid sentinel
i can also have the 2 connections to the printer now .
tepid sentinel
@next garnet had a few disconnects today but only while deleting a created file from the SD card Via DWC . i had been creating a file on the SD card via a macro, then manually deleting it . had to reboot printer to get connection again.
Also noticed when i create a file on the SD card i have to refresh the browser tobe able to see the file .
tepid sentinel
@next garnet replaced wifi with esp32 still getting disconnects, will try when the new version comes out in the next few days. then report back