#mods-discussion
1 messages · Page 179 of 1
yeah the water thing is even a problem with the b25 sometimes too, its something related to how the game handles the water
oh yeah xD
I think the prop is spinning too fast for the game so when it hits water, which is very dense, it has a mental breakdown
and voila, your game is pause preemptively
maybe compare it to how fast the b25 props spin, it's possible to land that in water compared to the hmx
oo
but again its a lucky dip if it gets unstable
the hmx?
oh cool xD
Nicee
when it decides to stop exploding on its own xD
did you try to remove the engine in the parts selector if that was possible?
hmm
it usually breaks beforehand, but if I try it when physics is paused
then it could work
slo mo spawn, pause, change
maybe then we can see how it flies, much lighter but if the basic controls work properly
please
ooooo
that damn prop xD
it might be easy to borrow n/b info from the b25 to work into the prop to fix it?
ye
then just a matter of asking the two modders to release a fix if you wanted to do that
drum rollll
I need to show this
what's happening
yeees looks very promising
it's still processing
does it fly like this?
ayy its essentially a glider atm
now fix propellor
yez
That's more than welcome
just use a stock engine code
stock engine gang
idk from some vanilla vehicle then check what's different for the throttle and stuff
Would work realistically too, the hmx would just use a crank to start the motor anyway
yea
idk from some vanilla vehicle then check what's different for the throttle and stuff
@frank kelp gud news is that it's labelled as what engine it is
so specs should be ez to come by
all of this is a tomorrow job though, I am shattered and more likely to f things up
yeap i'd have been off already but it was an interesting convo
ay gnight and good luck with it
thank you, see you tomorrow for a progress update (hopefully)
@supple plover ping me if you make good progress or release the mod
What I also really want fixed are the RX-7 and BTR
Ok, i will
For the engine I think you could just do engine->rotator
A submarine would be cool
IDK how it works currently, but might be pre-powertrain (the plane)
I Don't get why nobody made the GaGa BuBu when the Gavril Bluebuck released
cant see what the heck that would be
pignose
tis for el notchbacc
needed more distinction
i turned the current bumper into the "aero" one, and used it on some HX configs for the 200BX
noice engine
needs work, but its a start
looks really good tbh
pignose 200bx be lookin fresh doe
Yea, gib relez wbimp 1.3
Me so hyped
The update will prolly add so much content that i wont even have time to check it all out
WBIMP : ready for release with so much content
Kueso : nah I'll add even more content
It really do be dat way doe
Tbf I feel bad for dropping the IBX for the micron. Both took about the same time to make, and being that the FBK exists and does what the IBX did but 10x better, I think it’s a fair trade
I also ditched the I6 89 Pessima as it was very buggy and based on an ancient jbeam. I plan on doing an Acura Legend (1st gen) style coupe in the future with a V6 to replace it
The V8 Pessima is still here and has been totally redone with a new mesh (SOHC and DOHC heads available) and jbeam too
So that’s nice
Also badging
Thing is, FBK is gone from the repo and many people don't have it or even know that it exists
Buruh what
Those images are ancient
Will it be relezed in wbimp or smth
WBIMP
wbimp
It’s like, an Asian market covet basically
1.1 single cam 3 cylinder
Turbo and AWD options
RHD custom gauges
Badging
And a slightly different exterior look
More like a kei van I suppose
Even though it’s not a kei car
that is epiq
ibishu macron
So with the 1.1 engine its like a EU spec of the micron
But its RHD so its still JP spec
Wtf
england spec 😎
Ah yese
Suzuki wagonr+ vibes here
For some reason
Or vauxhall agila for england specce😎
It’s an unholy amalgamation of lots of ideas
I still don’t know what market it would fit in best
The Moon
Lol
The small motor is for better economy, and it’s RHD nature leads me to see it as like an Indo-Asia market but, I don’t really know tbf
Lmao
UK market is defo not what I thought about, but it works
I’ll probably do that
first uk market car hype
IDK how it works currently, but might be pre-powertrain (the plane)
@calm hinge yes, indeed it is
For the engine I think you could just do engine->rotator
what exactly is a rotator
It's a thing that applies a torque to a bunch of nodes.
Essentially letting you send power to things that aren't wheels
It's a thing that applies a torque to a bunch of nodes.
@calm hinge ooh
But I am only able to do basic jbeam
My first time lol
Start by making the engine work as a powertrain engine 😛
Using vanilla engines as reference
Alright!
I'll send you the info you need for the rotator.
Thank you!
I'll send you the info you need for the rotator.
@calm hinge lol it actually already uses it
nice
that's been in most of the cars since release
engbaycrap cylinderthing fartcan etc
yeah, "engbaycrap" was a gabester thing that he originally did in rigs of rods iirc.
the funny part is when the d/h/roamer/marshal engines were updated, they just got changed to "engbay"
easter egg got the delet
Yeah, that's a gabe thing AFAIK
But there is some weird stuff if you check jbeam comments still
Stoat still hasn't told me what the "front meat" on the van is 🤔
agre
🤔
meat
i have done a think
he just told you what is front meat
the meat of the front
Working on a little something...
s w a g
cool 👏 and 👏 good
10/10
Nice
i wonder who made that
@sweet star there's a new satsuma version, no need to use that old one 👀
@sweet star there's a new satsuma version, no need to use that old one 👀
@native zealot Could you link me dat
Thanks homie
was that ever released?
only photo of it I could find is from 2017
u just realized bruh
bruehe
@native zealot will you be updating it out of curiosity?
sway bars 🙏
Satsuma: does not drive well in arcade
Me: drives in arcade
Welp time to learn realistic
Are there any flat race track-type mods in beamng? I'm looking for a go kart inspired track with alot of curves
Another good feature would be if it were small
idk but the track in the industrial map seems perfect for that
Is the level 3 variable booster (instake) a vanilla thing?
I use an Non-race I4 engine with a stage 2 block and stage 3 variable booster and it creates the stutututu sound after you let go of the gas, I was wondering if that was a vanilla thing?
stage 3 turbos are vanilla
Has anyone seen a model similar to the Phantom Corsair, on a bit of a search but not finding something close enough
My vote for the next car goes to a 50s open wheel race car, a 2020 Bolide, or a Modern Sedan (With StockCar Variant) [Also a T-Series FireTruck with functioning water cannon]
We need a fire truck but I know that would be hard unless the devs added water physics like that
Need more official estates/wagons
or atleast enough
@lucid elk noe
Yes
I want sunburst facelift lol
Or an older Sunburst
There's a legacy vehicle pack for that
not what he means
Ah
Yea
Is that just an alternate look or is it a separate model I can't distinguish
Cuz i can't find this version specifically
Just a better version
If theres anything I want like the sunburst it's that
I own a 2001 outback, became something of an enthusiast even though I own a base model
If i could make my buzzer in beamng I would
lmfaoo bugeye
suggestion: someone make a 6 lug wheel mod for the d-series with wheels larger than 17 inches
Mod of mod suggestion: pacenotes for the Dunsfold Aerodrome map
Suggestion: rwd 98 pessima (somehow)
We need a fire truck but I know that would be hard unless the devs added water physics like that
@pseudo cypress they posted a teaser of water physics a little bit ago
you dont need realistic fire trucks
just add pushing physics
and water
and cannon physics which probably wont be easy
you know, instead of asking for pointless stuff, why not learn and do it yourself?
asking wont take it anywhere
people will avoid doing it just cause you asked
I made a fire truck a long time ago in Automation and exported it to Beam a long time ago.
Sure, it may not have what Lumio wants, but it is there.
you just pick random trash in automation
and it gets exported on the worse way possible
and thats if you ignore the jbeam
yw
or because crashhard made it
Thats what i meant
Gotta flex his PC
lets see how innacurate it is
First off the wheels arent right
Engine sounds are awful
The spoked wheela look atrocious
eh is just wip lol
Well he said several times that all of those would be fixed upon release, and that was months ago
then i guess we found out when he hit project burn-out :p
True
I told him several times that he was doing stuff wrong and that it wouldnt be remotely realistic and he kept on going "you dont know what youre talking about"
Even though i grew up around prewar cars
exactly
Friendship ended with auriga heron
Now CH Classic is my best friend
But why the hell does he make everything have a super laggy jbimm
i think the only issue i have with the new classic is that there's no driver cam
apart from that, i love the car, super detailed and fun to drive and break
ooooh yeah, look at the front and doors
the suspension has so much jbeam on it jeez
CrashHard Classic has evolved into mass of numbers
my old enemy... numbers
math...
but its mentioned it can be laggy for colliding parts so
you can use the low end body too
forgot most of my math knowledge since school stopped existing. also, i tried using low end body, if anything it made it MORE laggy
the auriga will never get replaced by it imo, crashhard stuff is just too powerful for my pc
oh right the low end body
the 8x8 doesnt have that does it?
that thing is one of my faves but my pc hates it
my pc hates beamng in general lol
gets hotter than the sun and fans up a storm but runs... good... somehow
my only problem is my 380 mods
I dont remember how but I was getting 1.33 times slow mo
replay mode
ah
1.33 times slowmo is in replay mode
well x2 slow mo helps running the 8x8 a bit but just not as fun
agreed
true
I lag with the standard one as well. I just remove the engine cover some times
and the manifolds, etc.
the best 8x8 i have, other than the beaver, is the MAN
favorite car for me is the "FFE-Motorsports V10-35SP" or the FFE as i call it since its such a nice track car which goes super fast
and it can do that one thing that one mercedes did in that one race
known as aviation
Heron is love heron is life
i also had the jalkku one but i held a competition of all my 8x8's to see if it was even worth holding on to
Even tho it sucks as as a mod
I love the little ignition key detail
ye
Me too
never seen the mod before
The heron shakes like hell
do you have the most recent?
Interior camera is just going up and down
i guess im fairly new to playing beamng? i havent seen most mods in the lifetime and only played for a year or 2. but ive seen the game all the way back to when the vehicle menu was a dropdown selector
It breaks when you crash too. camera goes loose like on the T-Series when the cab breaks off in interior view
The auriga heron mod is a classic
Original is from 2014
Yeah i do use the updated version
pretty sure I still have the original
i started playing..... lemme see
lemme check it out
i probably got the game when you did @latent ivy
but yeah ive been trying to get as many old time mods as i can
I got the game on steam back in 2015
ive been looking at mods that i find interesting
i think my mod limit warning gave up on me
lol
ye its a nice one
just not very stable
well made, breaks well, very jiggly for some reason
behaves enough like an old car
sways
a lot
i think both mods are good
some are better in their own respects
but nothing for me is gonna beat out the fact that if you put CH in park, it makes you go 200mph in park and causes brake fade
kinda why I guess the classic's suspension breaks easily.
maybe
its a old car. alpha mod.
lol
leaf spring connection so not as stable
yeah
the plymouth fury III has weird suspension i havent seen before its kinda funky when breaking
but i need to check if thats true
give me a sec
idk about that mod
also the low end body REALLY helps
not for me it doesnt
low end body if anything makes it more laggy for me
so thats funny
yeah, weird
idk, i think my computer just wants to kick itself more and hates not having a challenge lol
tfw
your pc is markiplier
lol
not a masochist
it just really likes hating itself. sometimes
say what you will, the auriga achieves one thing that many beamng cars cant
elegance
sometimes it feels like im touching the sun and the fan is just making a mini windstorm in a metal cage, but sometimes its quieter than it is playing tetris
also, true
i wouldve said that ive seen cars that before even a full lap on boomerang started to overheat, but yeah, that is inefficient
accurate for the time period, which is why i love it
i cant sleep
i dont sleep
lol
until school starts again
then i have to sleep normally
so its big sads
also
question
thoughts on Boomerang Racetrack?
yeah
i like it because ITS ACTUALLY SMOOTH on banked turns
so i can use FR17 on it and go super fast
i kinda find most race tracks really cramped to race on, though i havent raced ai on any
neither
i usually just record my laps to see if i took good lines and see what time i got
boomerang is perfect for it
i'll check it out when i can
there are tons of routes, top route that cuts about 40% of the track is my favorite but long route is 2nd favorite
and plus
i can use cars from the H-series on it to the FFE
and they all feel good
Glad the FFE truck was finally fixed
Yeah, I think the trick is to go as fast as you can in that car
Because then you get downforce so the car doesn't bite back at you during corners
"when in doubt, go flat out"
sup
Hi
my progress after 2 day work
lol may look silly at that angle
because this is my second car that i modeled and its my 1st mod
i wanna know how to do this https://www.reddit.com/r/BeamNG/comments/ii05jh/my_latest_creation_the_ultimate_pickup/
648 votes and 56 comments so far on Reddit
yo the link wont work before
itsz invalid
sup modders what are we gonna talk about?
no i mean you said the link was invaild
i think he either positioned the dseries on the tseries frame with the world editor or using the f7 key
bc i wanna try making that a mod
like just strip the t series and put a d series cab on it
how do rotators work?
allright the 5th wheel model is done atleast for testing https://cdn.discordapp.com/attachments/438991733125021710/749302213100175407/unknown.png
might wanna apply edgesplit
how do id o that?
I dont think the d series truck needs to be on a 3 axle frame
Ford f650 is 2 axle
You can put the d series on T65 short frame
how do id o that?
@latent ivy you need to apply it as a modifier
and change the angle to like 50 or something
cuz the doors look like balloons
makes it smoother when you add edge split
@lucid elk its gonna be a t series so who ever uses it can have a short frame
how do rotators work?
@latent ivy lol do you want to look at strato rotators for help
I can dm you the jbeam
I need a bit of an advice
that is
what to do with the bus number on the roof
while its fine on DT45L and base game DT40L (the 2 from the left)
on DT35L and DT30L most of it disappears due to where the bus was shortened
I could either make modding harder
and create different skins for each bus
or just remove the number entirely
Imo I would just remove the number or move it somewhere else
only place I could move it
that would be present on all 4 of the busses
would be very front end of the bus
or rear end
which would look rather odd on the 45ft one
Ok then I’d just remove it
I think I will just duplicate that one skin on every single bus
That might work
I'm not going to have more than 1 or 2 busses in this pack anyways as of now
Alright
@harsh coyote you made the 45 and 35?
Have you released the 30 or double yet?
double decker is scrapped pretty much
30 has not been released yet iirc
haven't updated the pack in a good while
Do you plan to?
30 yes
double decker
no
its junk
jbeam is all there
but I mesh is very much not
and I don't have time to deal with it
I'm excited, will you patch the missing engine noise?
?
was it missing on the repo version lol?
I redid the whole thing from scratch a while ago
At least for me, the 35 and 45 had no engine noise after the update
repo version is rather outdated
Yeah i had the repo. I have a lot of mods to look out for updates for as is
I have to reinstall my entire game because I just downloaded the mods, never subscribed to them, now updated all, duplicated every mod in my folders, game goes crazy because of it, and the mods partly don't work because older, outdated files are still in my game folder
I fooked up pretty hard xd
just delete your game folder
reinstalling the game via steam for example won't fix it, since it doesn't remove the user folder
Oh I plan to do that, sorry if I wrote it wrong xd
Btw, what iiiiif I can't find a few mods in the ingame repo, but on the website?
How do I subscribe to the website ones then, and do they update ingame as soon as they get an update?
Okay I found the big fat green subscribe button
But my second question is still open
double decker bus would be epic
my game insists on reinstalling shit, kinda concerned
cuz there are certain maps/mods that for some reason dont register in my repo well
its semi there jbeam is still very buggy and wont work may need to have somone do that
if any of you are good with jbeaming dm me
bc it wont stay on the frame
@supple plover please do
It do look cool tho
man i love the evo, this car is insane
good crashing, good feel, fast, good sounds, everything
its fun
is what im saying
Bruh it woke up my sister sleeping the third floor, as I put it on speakers XD
lol
no
funny thing is the bronco is realistically strong
satsoom made of paper
The bronco was nice, but beamng basically made their own
yeeeeeee
The integral bed and open back thing is neat, its kinda like a jeep mixed with a pickup
the tachometer in the crashhard classic like to light up when you look at the sun lmao
is the glovebox really jbeamed?
lmao
crash hard's jbeam stuff is wayyyyy too detailed and dense
Well the prasu's glovebox was also jbeamed too XD
@near ruin its like one of those action figures that have the eyes that glow when the figure is against light lol
lol
I love crashhard's detail, but my pc doesnt
Strato is being pain the ass, I may need to rewrite the whole materials.cs to the newer main.Materials.json
lmfao
he jbeamed everything
crash hard is a mad lad
even the windshield falls off
ikr XD
but wobblematic uncoolguy
@near ruin how many voices is your sound set to? That sounds awesome
I usually have 512 but I've been using 256 voices recently
yup
Mood
typing 100
I change it often tho cause like
for some reason when I mess with it on gridmap it makes my whole game start to lag
but other maps its fine
what difference does it even make lol
I guess the amount of sound thats registered playing at once
my best guess
ill put in videos but I dont really see a difference either looking at it now
The one thing the CrashHard Classic is missing.
dang. world speed record at 100.31 mph but cant do it ingame rip
Whats the map limitations of BeamNG
yo
the back has so manty lines xD
im making the facelift if the current one was finished
stacks are still abit weak https://cdn.discordapp.com/attachments/710083442834145280/749612749180502036/2020-08-30_08-51-40.mp4
if i were you i would have polished it up a lot more like adding beds/an interior before even thinking about release
I was gonna go a bed and interior but was having problems
Alpha download here
https://www.beamng.com/threads/gavril-d-65.73264/#post-1216057
i saw
if i were you i would have polished it up a lot more like adding beds/an interior before even thinking about release
this is why i haven't downloaded it
I'm gonna try and add a bed and interior tomorrow
Slot too to where you get the 5th wheel like the one in the link and a bed version
And then just polish it up and it should be done
Besides minor things
Need to smooth shade the faces in blender
make some edges be sharp depending on angle
I did that but it didn't seem to fix anything oof
make some edges be sharp depending on angle
Ah yes, thanks
For copyright matters please contact us at: copymanager.mn@gmail.com
Mind Warehouse ► https://goo.gl/aeW8Sk
-
BvS10 Beowulf
https://youtu.be/2X69fPsh0cY
https://www.youtube.com/channel/UCv5geh9SvjKOxhAPjjNCq9A -
2021 Ram 1500 TRX
https://youtu.be/mAic0BRNz-U
https://youtu...
go to the second one
and look at the truck
someone make it
and the 4th one
i think its the 4th :/
alright ima just be honest someone make all of these XD
Relezed
Yup
They are
Iirc the equivalent of the normal gearbox's top gear is gear 50 in my mod
The Ai freaks out too lol
I also didnt want to name it F&F bc idk if it would get removed from The repo due to a real brand
They brought back the Wentward DT35 and 45L and added a DT30L
Ok so I've played BeamNG drive a bit now, what are some good mods?
what about a mod that adds more variety to the cars
there is one mod that adds a civetta 3.9 v8 to the sbr4 along other stuff that i adore but i dont remember the name
Anyone can give me some lore friendly car mod suggestions?
I lowkey want to take some pics of them
hey guys am i allowed to suggest mods?
and if someone can make a car mod for me dm me
people will only make you a mod if you're willing to pay a good amount
Define a good amount
Props depends on the amount of time someone has to put in the project, up on top how difficult it was, so special wishes, that require more, than a normal car would
that depends on the modder and what they want to charge
Its still many hours of work to make anything
Just the model usually takes a few weeks of constant work for a complete car
Ive got and idea for a map
You know te procedulary generated track made by beamng devs? Imagine that but for generating cities and freeways so the map could be infinite
What do you think guys
for those who care
What do you think guys?
A lot of work, but cool
Does the technical gun still fall off?
What the flying f**k
Add sticky wheels
the music gets louder the faster you drive
Rip
That is the most interesting mod I’ve seen
I was talking about new wheels
Didn’t think that’d be allowed on the repo
its on repo too tho
does it earrape
This is the best mod to exist in the game
why does Obama have a higher redline than my car
lmao
does it earrape if you go fast enough
lemme see
that would be great
I wish I hadn't started this
Does the technical gun still fall off?
@severe breach like the D15 mod?
A guy fixed that in the discussion thread
I have it, works great
lol someone did this with my mod i may keep it in the tseries code so people can do this
still haven't applied edge split
Add a bed
We need a bed
Also the exhaust doesnt make sense cuz it blocks up the doors
@tight ore imworking on it
it doesnt seem to have an effect
when i do apply it
im also gonna prob edit the hood
make the grille a little smaller
mabybe slant the hood
also if any of you wanna help this little project can be sped up
yeah like the D15
@supple plover
finaly getting the interior in
lmao
@fossil ore it isnt working
ill apply it and it doesnt show
its literally just a modifier
it should be set by default tho
unless you manually do the edges
which he most likely doesnt need to do
blender 2.7 moment
lmao
2.8 😴
hang on
isnt 2.9 out already
eh
2.7 mafia
im sticking to 2.8
also is anyone able to quickly slant my hood
Just use the tubes on Gridmap.
Easy hood slant. /s
yep
that fixed it
do the same to the rest of the pickup parts
apply smooth shading to the semi parts
and do the same there too
@latent ivy send the .dae over and i'll fix it lol
dont send the blend as i wont be able to open it in 2.79 👍
also you might wanna get rid of the .001s in the materials
why are the seats doing that?
you need to apply locations to basically everything that isnt a moving prop like pedals, gauges, steering wheels or whatever
damn it i did it again
lol
ye
fuc
then itll be fine
allright
why did you even make it way offset anyway
import the trucks frame and align it again
you should maybe copy the blend file at times so you can go back when big mistakes were made
i dont think hes using blend files even
there we go and yes i am
now the mirrors how do i adjust those
would i just move those in blender and apply transform but there not apart of the truck
nodeoffset in jbeam
these?
so do you know what nodes are
somewhat yes
not there
nodeoffset moves both nodes and the flexbody
you set nodeoffset in the object slot
wdym?
what if it doesnt have one
add one
replace the "], at the end with "{"nodeOffset":{"x":0.0,"y":0.0,"z":0.0}}],
ohhhh
wait
so here?
does nodeOffset still work?
yes
dam
and yes
nice to know
?
x is side movement
y is backwards / forwards
z is vertical
remove the second " after "R mirror"
if im not mistaken that should work
wrong side again :D
dont try large numbers
try stuff like 0.1
or -0.1
vice versa
z
but im trying to move them down
yeah
iirc x doesn't even work
for down set "z" to like -0.15
looks semi better
prob the best its gonna get if i get it to far it gets super shaky
you should probably change the attaching beams then
ye
for now ill keep it there
ok now sterring wheel
also driver camera does this anyone know how to fix this?
where exactly is that
right behind the cab
where would i find the cam
there is a section for cameras in the jbeam
allright
also another thing how would i make this truck its own specfic thing rather then relying on the tseries
ok i found the wheel but its in the ground
you probrably applied transformations to the wheel as well
since the wheel is a prop the origin of it has to be where it rotates from
wth is this?
the origin of the mesh
also ive started doing the bed but the bed has no breakgroup code what would i add in that code
it is
also are you sure that bed would even fit
its floating
yes
thats not gonna work
oh
wel it doesnt look like yours works any better
really
tbh i think you should work on basic skills first
once you are experienced you should be able to make a mod like that in no time
i tried putting the code in the bed jbeam is this correct
the fact that you dont really know what you're doing shows that you need practice
i'd recommend checking out the mfd tutorials
bro ive come this far allready im not stopping
you havent gone far at all
why does nodody have fucking faith in me chirst
im not saying that i have no faith
ill figure this shit out myself
you need more practice bruh
you refuse to do the mfd box tutorial
and instead just ask people every single thing you do
and if you do ask people what to do you should at the very least listen to what they say
^
thats why nobody wants to help you
allready said ill figure it out myself
ok then figure it out yourself
figuring out everything yourself isnt a good option
you wont learn how to actaully do it
ehh, just let him do whatever he wants to do, you're not obligated to help him, its his own will if he wants to accept the advices he's been given so far
cant figure out why the thumbnails were taken like this, but its kinda eh
either way have fun soon ©️
LeGran coupe, so basically it was a trim level before it became a separate car?
Sounds GM-y.
the fascia looks mega rarted ngl
other than that I like the idea
it looks like a h-series had a baby with a moonhawk
but it does look american halol
the fascia looks mega rarted ngl
other than that I like the idea
@frank kelp its literally 1979 malibu you dunce
imma bouta stone this dude
lmao
im sorry i lashed out a bit but ive put 7 months into this for you to just shit on it?
hell im actually not sorry
im a bit touchy on the topic of people shitting on everything i do
its been an issue with everything i make in this game
im aware opinions exist, and i reserve the right to disagree with them.
sorry you dont like it
ofc you can disagree with my opinion, but I can still express it without the fear of being threatened afterwards
fml
salty lol
i cant do jack shit to you lol. im just upset that the first time i reveal the thumbnails the first thing i hear about it is: "looks mega rarted ngl"
like come on dude, was it necessary to word it like that at all? it just sounded like you had a "holier than thou" complex.
you dont have to like it, thats fine.
im actually sorry i lashed out
salty lol
@polar quarry a bit yes i wont lie
but i hope you can understand why
you seem a little irrational but whatever
well
you seem a little irrational but whatever
yeah i am a bit, my baby just got a shit taken on it
my opinion isn't others'
other people will find it awesome
some will hate it
that's bound to happen
of course
just how you worded it was rude and really uncalled for
granted my response was just as shitty if not worse
but still
I'm sorry if I hurt your feeling by saying that, but I can't just lie and say it looks great when I don't like it
especially here where literally anyone will say stuff like "rarted" to anything
you showed it online and expected to get a response you liked?
@polar quarry as far as i had heard, lucas actually liked it (based on previous comments)
so for him to pull a phat 180 was strange
I can surely appreciate the effort you put in it, but I personally don't like its looks
unless ive been misreading the situation from the beginning
I can surely appreciate the effort you put in it, but I personally don't like its looks
@frank kelp yeah i get it, you are ok man
im in the wrong here, sorry
i dont care for f1 stuff or whatever, but i still appreciate the effort put into lucas' stuff
I didn't really like the fascia, rather the idea behind the whole 80s moonhawk thing