errant glen
I had no issues at all when hunting Regirock and Registeel, but when trying to begin the Regice encounter, the program constantly fails to touch either the far left or bottom circle. This causes it no not start an encounter and auto-correct, but it still fails even after the auto correct. I was on an older version that had a fail rate of 60%, but now I am unable to begin and encounter at all on the current version.
Attached is how the puzzle looks after it tries to complete it.
steep urchin
Can you show a video of it running the route?
errant glen
Give me just a moment, gonna record it doing it a few times
of course it doesn't embed. thanks, discord
steep urchin
.mkv doesn’t embed. .mov or .mp4 will though. 
errant glen
converting it through vlc real quick
It's kind of random how it fails, but it does fail more often than it succeeds
steep urchin
That is strange. Because it works fine on my setups. I can see you're on wired controller. What program version is this? And is this Switch 1 or Switch 2?
errant glen
v0.54.26 and on Switch 2
steep urchin
I'll check on my Switch 2 at home. But it seems like there's quite some variation in the movement here compared to the Switch 1. This has been tested on Switch 2, but not extensively. (like making sure a couple runs worked before moving on to something else)
warm thistle
damn, i tested regieleki and regidrago for this but not the others. sorry for missing it
errant glen
Ah, gotcha
steep urchin
I am unable to reproduce this on my Switch 2. Both ESP32-S3 and Teensy work.
You said it worked fine for the other 2 base Regis?
Do you have SV by any chance? Are you able to run Flying Trial Farmer?
That program is also highly sensitive to stick controls (even more so than Regi lights). So I'm curious to see if that works on your setup.
errant glen
I don't have those unlocked unfortunately
I also tried using one of my extra controllers and it still has the same problem
errant glen
It’s just odd that it’s only regice and none of the other regis
I used my other game and tested with regidrago and it did that one fine
steep urchin
Does this work on Switch 1? (assuming you still have it)
errant glen
I have my switch 1 but don’t have a save file up to regice for it
steep urchin
You can transfer saves back and forth between Switch 1 and Switch 2. But it is somewhat annoying/scary if you're not used to doing it.
Regidrago broke with sys-botbase. But because I could replicate it locally, I was able to modify the sequence so that it would work reliably on both sys-botbase as well as all the existing controllers.
I'd do the same here with Regice, but I can't replicate the issue at all on my setups. So I can't even try to find a sequence that would work on your Switch while simultaneously not breaking everyone else. The most unsettling thing is that there's something different about your set than others. We don't normally see differences like this as things are very consistent across Switches given the same setups.
errant glen
I don’t even know what’s different about my setup :C
I could also pull down the code and try to mess with it on my end, but not sure how far I’d get in that endeavor
steep urchin
If you're willing and able to do that, that would be amazing. Because if you're able to find a sequence that works on yours, we can check if it still works with everything else.
