naive seal
Hi all,
I'm using Computer controls programs with a Leonardo and since this morning my CP210x doesn't want to work anymore, the red led is lighted and both blue leds are blinking synchronously. The program detect the CP210x, is able to connect with it but the communication isn't set (Up time doesn't increase)
I've tried flashing my Leonardo again, I've changed my wires between the Leonardo and the CP210x and I'm still stuck with this issue. If anyone has an idea I'll be glad to try it
latent yarrow
first use usb to plug lenardo into computer see if it get recognize as a pokemon controller to see if it flashed well
and you need try basic stuff try to restart switch, plug in and out of both sides
naive seal
it appear like this
and of course I've already tried plug and unplug all cables used for those programs, I've always assumed that the red led on the CP210x was the powered led but it also light when it's not plugged to my computer, is this a normal behavior or does it have a short circuit somewhere on the pcb which could explain my issue ?
jolly temple
If you see a blue status, it means the UART and serial are all working fine.
If the ticks is stuck at zero and not increasing, it means there's a connection issue between the Arduino and the Switch/dock.
Try redocking or restarting the Switch.
naive seal
Shuting down the Switch did the trick. I forgot to set the Switch to sleep last night, it's not the first time but I've never encountered this issue