Problem with hardware reset | Omega Community | Page 1

candid flume Jan 30, 2024, 12:42 AM

#

I was just about to install Upsilon, and was doing the "Flash lock check" (6+RESET), which instead of showing the rescue screen as shown in the Omega docs, started a hardware test. After running through all the steps, it now displays a barcode which I cannot exit, no matter what button I press (including reset). Connecting to a PC also does not change it, still just the barcode. I'd appreciate some help, thanks!

hasty kelp Jan 30, 2024, 6:04 AM

#

what

#

how

#

I've never seen that

#

what's your model?

#

and did you try pressing RESET on its own?

candid flume Jan 30, 2024, 6:49 AM

#

N0110, I just managed to fix it by opening it up, disconnecting then reconnecting the battery

#

it is a slightly suspicious device, got it second hand in China, it has a 3D printed housing

#

in any case, it works fine again now, so I am marking this as solved

past latch Jan 30, 2024, 7:07 AM

#

You should be able to exit with the reset button

#

If it doesn't work, it's ethier you didn't press the button as much as needed, or it's broken

#Problem with hardware reset