I just flashed external and after pressing the reset button it still shows the rescue screen.
#calculator blocked on rescue screen
rose sage
cobalt pond
Hello.
What firmware do you have, and what firmware do you tried to flash ?
rose sage
I was on 19.5.0 and wanted to flash 18.2.0
cobalt pond
You extracted external from 18-2-0.dfu and flashed external with webdfu website ?
rose sage
Yup
solid prism
rose sage
Ow
cobalt pond
But you can unlock with Rapid's method.
He is too modest to say he set it up
rose sage
Bien sûr x)
cobalt pond
ALors c bon 🙂
rose sage
Okay now this is really weird
I just tried to install the firmware from omega
But as soon as I go on the site the numworks calculator starts looking like this
Like it's simulating an error
cobalt pond
E19.5 prevents you from installing a Custom firmware (Upsilon, Omega) : Numworks locked all calcos with Epsilon, from revisions >= 16.4.3
rose sage
Right
rose sage
https://tiplanet.org/forum/viewtopic.php?f=113&t=25191&p=263495#p263495
I was only following these instructions
Should I get the recovery from the official site ?
cobalt pond
First you have to unlock with a Raspberry pico, or pi if you want to install Omega or Upsilon.
If you don't have right now, yes : RECOVERY your calco from NW website.
You will have E20.4.3
Then look for a friend with a rasp pico or pi
rose sage
Will a raspberry pi 3 work ?
cobalt pond
Yes (§2bis on RapidZapper post)
rose sage
Okay !