#🤝support
1 messages · Page 208 of 1
So they use a higher sensitivity
You can change the sensitivity back if you wish
Whenever we update we will put these changes in annoucements
If you prefered old just use 4.25 as sens
When trading stocks, which chart interval works better with the Algo? 10 seconds, 30 seconds, or 1 minute?
When trading stocks, which chart interval works better with the Algo? 10 seconds, 30 seconds, or 1 minute?
@onyx prism go higher, while the indicator is fully optimized to have a low computation time, charts below 1 minutes might be difficult to use, also we do not recommend trading such low tf, 15 min is a minimum for me
Yep you really don't want to trade <15m
Awesome Alex and Gecko...I wish I asked earlier. I got burnt today but it's a learning
guys what broker u use for stocks? also u do cfds? or u actually buy stocks??
Awesome Alex and Gecko...I wish I asked earlier. I got burnt today but it's a learning
@onyx prism srry to hear that 😦 hope you will have better results in the future, sticking on higher tf will help for sure
Trading the 10s chart will never end well 😦
How I can learn how to set up this not
This is a complete walkthrough of the main Lux Algo V2 script on TradingView & how it works.
- To get access to Lux Algo: https://luxalgo.com/products/lux-algo
- Join Free Discord Group: https://discord.gg/LUX
Mobile & Desktop walkthrough for setting up Lux Algo on TradingView after you've been granted access. Join our Discord: https://discord.gg/LUX | You can get access here: https://luxalgo.com/products/lux-algo
Watch the full video walkthrough of Lux Algo features here: https://...
Could you pls share the chart settings preffered which is comparable with lux
I read in one of the messages that trade signals (buy/sell) are made upon closing a bar. So in case of attached, buy signal was at 3.71. The next sell came in at the close of 3.04. A huge slippage, isn't it?
I read in one of the messages that trade signals (buy/sell) are made upon closing a bar. So in case of attached, buy signal was at 3.71. The next sell came in at the close of 3.04. A huge slippage, isn't it?
@onyx prism it isn't always possible to have perfect signals, this is even more the case after a large gap such as the one you can see in the img, this gap caused a strong signal to occur.
@onyx prism it isn't always possible to have perfect signals, this is even more the case after a large gap such as the one you can see in the img, this gap caused a strong signal to occur.
@shy relic may u explein what TF u use and how u menage ur trades?
@shy relic may u explein what TF u use and how u menage ur trades?
@knotty peak I mostly develop stuff, so I have to check all tf, but I am very comfortable with 15 min tf, larger is often better. As for money management there will be resources posted about it soon 🙂
Can I get the link on the updated lux algo and how to use it
!update
To update Lux Algo V2, refresh your browser / screen and remove it, add it back to your chart, and save your chart layout on TradingView.
If this didn't work, refresh your browser / TradingView mobile app and then remove/re-add Lux Algo V2 back to your chart and save your chart layout.
Full guide: https://luxalgo.com/apps/help-center#hc-how-to-update
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
Hello, which app can you use to short stocks and forex?
What do you recommend as an optimal Sensitivity benchmark for trading 15M or 30M intervals?
👍
Hello, which app can you use to short stocks and forex?
Hello, which app can you use to short stocks and forex?
@errant cloak you mean broker? see #704043568079306802 , there is also Alpaca who is integrated in tradingview.
hello i have purchased and have been granted the lux algo but i do not see the lux algo v2 just volatility and ocsilliatore
hello i have purchased and have been granted the lux algo but i do not see the lux algo v2 just volatility and ocsilliatore
@fossil valve did you get access to them long ago ? you can email support@luxalgo.com
If it's not under invite only scripts email support@luxalgo.com
and let them know 🙂
just did. is there any reason why i got accepted to the other 2 scripts and not the v2?
That's odd @fossil valve will get that fixed
What does LUX VOLATILITY MEANS?
@twin sentinel
75%+ means the Lux Volatility is high
25% or below means it's low
Volatility low = Market is in a sideways state and a bigger impulse move is likely beginning to form.
Volatility high = Current impulse move is likely beginning to get exhausted.
Volatility normal = The current move likely has more room to continue.
its weird because it says v2 has been granted to me and to refresh the page and i did but nothing still let me try again
nonetheless i emailed
its weird because it says v2 has been granted to me and to refresh the page and i did but nothing still let me try again
@fossil valve you received a notification on tradingview?
yes
and tried refreshing the browser but nothing sitll
i can send a screen shot if youd like
I dont think it will be necessary, but then its weird, you could try loging out and loging in back, the staff could also try to give you access to it once again, but its weird you cant find it in your invite only scripts
i emailed them already, also how do we turno n those scripts? it says i need to do a 30 day free trial
i emailed them already, also how do we turno n those scripts? it says i need to do a 30 day free trial
@fossil valve you are a free user? You can only use a maximum of three indicators on your chart, try removing somes and add the Lux indicators.
how do i remove?
i dont see any indicators showing unless its hidden but i dont know how to take them off or if there is a function to clear all
how do i remove?
@fossil valve hover on the indicator title, you will see some icons, click on the cross
@fossil valve you can also do a right click on your chart, and click on "remove indicators" to remove them all
@fossil valve finally you can also do it from the object tree, those are three ways to remove indicators, I could find a fourth one tho 😄
thank you so much
Its possible change hour gtm on discord? Or on trading view?
Its possible change hour gtm on discord? Or on trading view?
@cloud elbow click on the current time that appear at bottom right of your chart, then select "UTC"
Hi all, I am noticing that the alerts that are set for Gold, and the indices are coming out very delayed. My PSAR flip alerts are bang on but the ones I have set for the Luxalgo are between 5 to 7 minutes behind the signal. is there anyway of getting these to alert a little quicker?? Thank you in advance.
Yep just reduce sensitivity
@warped iris The defaults will lag since they are for higher swings
so reduce the sens
Gotcha, I scalp them on the one minute so that makes total sense.
@shy relic What are your settings and timeframe you use?
@shy relic What are your settings and timeframe you use?
@graceful stirrup Since I touch the source code of the indicator I must use a wide range of timeframes and settings in order to make sure everything works fine, so for trading I am not the right person to ask. I always recommend using larger time frames, 15 min minimum
I think I know the answer on this but just want to confirm...... If I change the sensitivity on Luxalgo on one pair, say GBPUSD, will the sensitivity change on all the pairs including gold and the indicies?? Thank you
Yep 🙂
Which time frame has more sucess rate ???.... i see more opportunities with 15 min window...guys share ur point of view...so that many can have benefits with this....looking forward to hear from u guys..
@indigo cradle : Thank you
Can someone help to remove all the clutters
?
@haughty lynx Please don't talk in profit sharing
Just increase the sensitivity
Can someone help clean the luxalgo with all the clutter
Yes
please
read my message
- You are zoomed out a LOT
- You can increase sensitvity
Okay good, thanks
I am looking for the best Lux Algo 2.9 Setting? Can anyone help me? Thx.
in trading view
There isn't a so called best
depends on the market condition and time frame
But I'd recommend starting around 4.85 and tune it from there @signal hamlet
Sensitivity 4.85?
alot of people like 5/2/20 to start but yeah 4.85 sensitivity is what I referred it
I use MA Cross EMA, CM_Ultimate MA, Swing Highs/Lows, Supertrend Buy and Sell sell signals
signal type? not sure...
And what do you use in lux?
S/R stuff
or just signals?
Just stick to default for contrarian signals or if you prefer it more senstative go to 4.25
S/R stuff?
It doesn't repaint ❓once candle is closed, no??? I've had no issues
ohh If its on one candle it will change it doesn't when it is closed though
Ahh i see what u mean
Please
No repaint 💔
This is my no1 pet peeve hahaha
Nothing we make repaints 😉
Repainting is when signals in the past (after candle close) are removed which is of course fraudulent.
You can see an explanation of repainting here: https://www.ea-coder.com/forex-repainting-indicators/#:~:text=Repainting indicator is an indicator,look extremely accurate and flawless
"Unlike repainting indicators, non-repainting indicators do not change their values after the price bar is closed. They normally make use of the price bars to the left when calculating their values."
@signal hamlet Yep lux has loads of things built in like S/R and trendlines
After bar close or every bar?
after bar close
Sorry for all the questions everyone..... In past Luxalgo videos on Youtube, the S&R show a red for resistance and a blue for support, how is that done, also how does the significance # work when I turn on the Predictive S&R? Thank you
Those were the old ones
Those are bad and not special and are for free now on our tradingview account
They are more attractive to newer traders but they draw from pivot points in the past
So are not real time
our predictive S/R gives real time S/R areas on your chart
@indigo cradle Understood, Thank you. How does the significance of the S&R work, tried each number and there doesn't seem to be to much difference.
Will increase the lookback on them
We should have a music channel where we can share music
So the higher the number the mode major the S/R
I wanna know how everyone gets in their mentality when trading, i wanna know if they listen to certain tunes to get their head right
@indigo cradle , again thank you
I wanna know how everyone gets in their mentality when trading, i wanna know if they listen to certain tunes to get their head right
@jaunty perch nothing during trading, but I drive a lot as a field tech so when I am not melting my brain with political nonsense I like to listen to scripture and podcasts. Dave Ramsey, Motley Fool, Tony Robbins etc. Anything to help keep life in perspective.
occasionally I'll just stream Youtube videos of other people trading. A lot of scam/gimmick types but you can find good ones out there
How do i use Replay in Tradingview? When i have Algo installed it doesn't allow me to use Replay
If you're using HA candles you cannot replay
I feel like tradeview is a bit delayed what do you guys think?
It'll say if it's delayed in the top right
Live data is availible at the bottom
it can be overall ranging for the look back period and you don’t necessarily need every signal thing to align up - it may take longer the the state to be considered trending @buoyant escarp
I am not seeing the setting on my iPad to turn on lines for resistance, etc. Where do I find that menu
Chart settings?
@mystic musk
Thanks but that isn't helping
I just need to upgrade I guess it says I am limited to three
Perfect. Thank you
Hmmm. What are you trying to enable? I put $OPTI on a 1min chart and turned on the predictive s/r & it works fine.
My only question is how the heck do you play pennies on the 1min lol
hello i havent received the algo on trading view yet
I was able to select the Lux Algo Script on TradingView. However, I am not able to see the other features for lux algo script. I don't see the settings or the lux algo option on top of the chart (in trading view) like shown on the set up video. Can you please help me with this issue?
Me too haven't receive algo on trading view.
Hey @dense coral you need to select the settings
@tidal owl added you to VIP chats early, you'll have access on TradingView very soon
Hello I like to now if you use all the signals when you trade (or you buy If you get STRONG BUY ) see below tips is 2H chart and If I will BUY on ech signal I will have a lat of losing trades ?
I tend to use only strong signals; I would use the buys on that chart as a take profit
@vivid forge Thanks' this is good thinking.
Strong signals are best to trust the market is trending @green plover normal signals some just ignore, especially during trends although they sometimes can provide opportunities for small trade setups. (e.g. - normal buy signal & take profit at the EQ Cloud - then re-enter short at the cloud and use the next Strong Sell as confirmation the market is still downtrending)
Hi I don’t even see the LuX Algo V2.9 on the chart
I don’t see the V2.9 on the chart
@dense coral see the arrow in the top left?
click it and you'll find all the indicators on your chart, including Lux Algo V2.9
^6
Awesome. Thanks!
Any suggestion how to set the alert message dynamically. So if i choose alert condition any strong i want to have the alert message tell me its a strong buy or strong sell. That will save me setting less alert
When we get signals do we enter right away or should we do our analysis first
!scanners
You can find the scanner signals in these channels:
#695668653869236433 #695732700991979601 #695668580301144064 #695668800044925009 #695668811784781874 #695668827937177660 #695732857959612566
Included in the channels are thousands of TradingView alerts created on the Lux Algo V2.9 default settings.
Learn more about how it works here: https://luxalgo.com/apps/help-center#hc-automated-market-scanners
You can go to the pinned message in #💬hangout to see the complete list of tickers/timeframes included in the channels or type the !list command.
The scanners are ideas, not signals to be followed blindly
!backtesting
Information regarding back-testing data and % accuracy: https://luxalgo.com/apps/help-center#!how-accurate-are-the-signals
Can anyone tell me how to get access to the LuxAlgo indicator? I was told that I have full access but when I followed the instructions it says I haven’t any access to use the script
Please do I need to uninstall the luxalgo because it’s populated with sell and buy
More info on changing the input settings on Lux Algo: https://luxalgo.com/apps/help-center#!hc-adjusting-input-settings
@feral lava what candle stick is best for the indicator? Thanks
Normal candlesticks @tepid sigil although many use Heikin Ashi candles to smooth data & see longer trends. You can read more about Heikin Ashi here:
!ha
Heikin Ashi Candles explanation: https://luxalgo.com/apps/help-center#hc-heikin-ashi-1
@feral lava heikin ashi 5min? Or smaller time frame?
If I want to use only 2.7. How can I reload that template?
You can't
Is there a way i can get an alert when the oscillator turns blue or red on a candle close
Yep in alert conditions just select lux oscillator, plot 1
Crossing
Then plot0
On bar close
Is there a way i can get an alert when the oscillator turns blue or red on a candle close
@plain gorge you use this to get a entry?
I just wanna say yall customer service
Or c2 whatever it is 👎👎
Does the algo works best on candles or heikin ashi? #plss confirm.
@plain gorge you use this to get a entry?
@left nest sometimes
@compact yacht is that a thumbs down?
@twin sentinel there is no best really, it's whatever the user prefers
Results wise, probability wise, is there something that has strong positivity in winning?
!visible
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V2.9 inputs)
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
@faint cypress ^
@jaunty perch I need help I still can’t see the algo on TradingView
Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI
Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Mobile & Desktop walkthrough for setting up Lux Algo on TradingView after you've been granted access. Join our Discord: https://discord.gg/LUX | You can get access here: https://luxalgo.com/products/lux-algo
Watch the full video walkthrough of Lux Algo features here: https://...
@indigo cradle hey I got the algo yesterday and was added to the discord then I got an email asking about my TradingView username but I still can’t see it
Did you give them your username?
With the new update, the trade setup have been removed?
Yes
Yes - releasing for free today
Okay
Nevermind I got it @indigo cradle
?
@indigo cradle yes its a 👎.
Been waiting for a reply all week
From who?
If you emailed sometimes they get filtered by security
And our customer service in discord is pretty much instant 😉
Ion know i emailed customers service
Richard replied in far time
But who ever c2 is im
Still waiting for response from them
Richard just asked for my name this morning say c2 needed but never replied to be email
Thats the name that shows up when he emailed me
What email address are you emailing?
We don't have a Richard
Nor a c2
Just to confirm, you are emailing support@luxalgo.com right?
!scanners
You can find the scanner signals in these channels:
#695668653869236433 #695732700991979601 #695668580301144064 #695668800044925009 #695668811784781874 #695668827937177660 #695732857959612566
Included in the channels are thousands of TradingView alerts created on the Lux Algo V2.9 default settings.
Learn more about how it works here: https://luxalgo.com/apps/help-center#hc-automated-market-scanners
You can go to the pinned message in #💬hangout to see the complete list of tickers/timeframes included in the channels or type the !list command.
@compact yacht I can't help if I don't know who richard is haha
You do know
That's not us?
@compact yacht You are emailing someone who is 0 to do with us
Or Lux
The only email Lux has is support@luxalgo.com
So it's not our support 😉
@indigo cradle well I got the email from yall website.
Nope
I can assure you
You didn't
Our website is luxalgo.com
So if you want support from us that's support@luxalgo.com 😉
lux20 is active for the next few hours 😉
How to install this trade setup feature? Does this work on phone as well? https://www.tradingview.com/script/1ibzuoEv-Trade-Setup-Feature/
Yes works on phone
Add to favourites
Then go to indicators
and it'll appear there 🙂
Can you tell me step by step plss
Do i have to add this link in the favorites? And where can i find fav tab?
Go to the link
Click this button
Open your chart
Go to indicators
Go to favourites
Select
It will work with it
It works with anything
It's just an indicator
You have to switch it between long and short of course
@indigo cradle I did
@compact yacht I can promise - that wasn't from our website
If you can show me - I'll eat me hat hahah
@indigo cradle lol no ion want you to do that 😂
Want*
Thank you
The plan luxalgo of 67$ is for one month ? I didn’t find this information in the website
Yep
The plan luxalgo of 67$ is for one month ? I didn’t find this information in the website
@gilded oak during the checkout process yes
What are the trade setup feature settings?
So the "Directional Matrix" 010, 020, 030, etc are just SMA lines? If I see blue emojis that mean price action is above that specific SMA?
Weird that 070 is red, then 110 & 120
What are the trade setup feature setting plss guide
@hollow wigeon They are SMA/WMA or LINREG depends on the settings and the emojis tell you the direction
so if one is rising or falling
@indigo cradle Can you tell me what is s/r significance?
It's the significance of the S/R level or any of the lux calculations
So the higher the value
The longer the lookback
So setting it at 9 will show the oldest most major trendlines
2 will show smaller one
and it also impacts the dashboards "State" reading
Hey, I bought lux algo twice, once with 20% off and other with normal price
what do I do?
will it add to my time?
Hello, I have a 20% off code and was wondering if this is a one time thing or will it be applied each quarter or year depending on the plan I pick? Thanks
Ok
can tradingview give alerts whenever one of the 'sell' or 'strong' or any of that shows up?
!alerts
How to set up your own custom alerts in TradingView: https://luxalgo.com/apps/help-center#hc-creating-alerts-on-tradingview
ty
where did equalizer lower band go?
Link to our resources page, lots of information regarding our features & FAQ's can be found here: https://luxalgo.com/apps/help-center
It's just renamed EQ cloud
@jaunty sage hehe thx bud, how did u know i was referring to your
video
smart man
@jaunty sage please last question,
do u use heikin ashi?
or heikin ashi as a source?
I have a question about the membership email I just received
I'm about to go buy it will it automatically start when my current membership expires? So I don't overlap and pay
@jaunty perch i miss trend osc 50 in dashboard...its good to see trend whether bullish or bearish..
Is there any chance of adding it again
Nope not being added back but you can add the oscillator to your chart 😉
and just set it to 50
hmmmmmmm
I thought it was just my own glitch... but I've reset the chart, reloaded the indicator, restarted my computer
nuffin
very very odd
knowing tradingview it'll fix itself in a few mins
Works for me :/
I dunno what to do.. lol
can confirm it's workign for me too
I'll fool around a bit more
you cleared cache?
@indigo cradle yep.. it seems to be a TV thing.. it's only on the one layout
I can load it no problem on other layouts
classic TV
Then plot0
@indigo cradle plot 1 crossing plot 0 is that a buy signal
ummmm I'm not 100% which line is which
let me try see
Oscillator we mean
Okay perfect thanks
@indigo cradle interesting.. on tradingview i can be on a 15min timeframe but bot can calculate using 2hr timeframe for signals..
advisable? since higher timeframe.. is more "secure" 😅
remind me again. For trending markets.. Stick with confirmation.. if its ranging contrarian?
It's a nice idea yep 😉
hmmm suggested setting for agility?
@indigo cradle Hi, I would like to know what exactly the time frame means on the alerts, for example XXX Strong Sell Signal (1D chart)? I know it means one day chart, but what's the importance of it? Thanks
1D chart, each candle = 1 day
1H chart, each candle = 1 hour @tepid sigil
Hello
I'm currently a monthly subscriber but would like to upgrade to quarterly and take advantage of the 20% discount. How do I go about that?
!upgrade
You can upgrade your monthly subscription at anytime during your subscription by purchasing one of our exclusive plans.
Once purchased, we ensure your monthly subscription is cancelled for you and add on the remaining amount of time left to your new plan.
ok, thanks
Hello
@torpid badger please email support@lxualgo.com ^ responsed in #💬hangout
no prob! @worthy siren 👍
1D chart, each candle = 1 day
1H chart, each candle = 1 hour @tepid sigil
@feral lava I know about this, I am just wondering what's the time frame doing in the signals; such as why it is strong sell in 1d chart but not strong sell in 1h chart
Because it would have been a daily candle that closed with a strong sell
If a 1h candle closes with a strong signal it will give a signal for a 1h strong sell
If both a 1d and 1h candle close with strong sells, both will signal
ect
Because it would have been a daily candle that closed with a strong sell
@indigo cradle I see.....also I would like to know what's the difference between a Green Buy signal and Green Strong Signal?
Link to our resources page, lots of information regarding our features & FAQ's can be found here: https://luxalgo.com/apps/help-center
I'd suggest giving it a good read through - answers everything and takes 10m, you'll know the entire system 🙂
I'd suggest giving it a good read through - answers everything and takes 10m, you'll know the entire system 🙂
@indigo cradle awesome
I'm having trouble updating. I've removed the indicator but when I reload it just loads the 2.8 version again
how to do you add an alert? You use to be able to with the older version
I'm having trouble updating. I've removed the indicator but when I reload it just loads the 2.8 version again
@signal pine remove lux, save chart layout, close TradingView, reopen, go to invite only scripts & add Lux
^
yea @signal pine sometimes it bugs out a little bit but should work with a couple refreshes
!update
To update Lux Algo V2, refresh your browser / screen and remove it, add it back to your chart, and save your chart layout on TradingView.
If this didn't work, refresh your browser / TradingView mobile app and then remove/re-add Lux Algo V2 back to your chart and save your chart layout.
Full guide: https://luxalgo.com/apps/help-center#hc-how-to-update
how to do you add an alert? You use to be able to with the older version
@wraith relic same way as before, just some of the terminology changed
but you can still do any strong
I was not saving the layout. Thanks
so what terminology changed? All it says is Vol
instead of just normal & strong they've got confirmation & contrarian
!overview
Complete Lux Algo walkthrough on YouTube: https://www.youtube.com/watch?v=c12sF8xb24k&t=144s
This is a complete walkthrough of the main Lux Algo V2 script on TradingView & how it works.
- To get access to Lux Algo: https://luxalgo.com/products/lux-algo
- Join Free Discord Group: https://discord.gg/LUX
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
Under “condition” be sure to select Lux Algo.
Are we able to save different Luxalgo settings to different pairs? Or will the settings be the same for each pair everytime I change something? Thank you
Are we able to save different Luxalgo settings to different pairs? Or will the settings be the same for each pair everytime I change something? Thank you
@warped iris you can't save the settings to the pair, but you can save multiple layouts with the upgraded TradingView plans
!scanners
You can find the scanner signals in these channels if you have signed up with us and have the VIP role:
#695668653869236433 #695732700991979601 #695668580301144064 #695668800044925009 #695668811784781874 #695668827937177660 #695732857959612566
Included in the channels are thousands of TradingView alerts created on the Lux Algo V2.9 default settings.
Learn more about how they work here: https://luxalgo.com/apps/help-center#hc-automated-market-scanners
I have a question do you guy have automatic trading ?
nope
they do not
!auto
Will it trade for me automatically? https://luxalgo.com/apps/help-center#!hc-will-it-trade-for-me-automatically
you can still do it if you want
was wondering if anyone knew any algos that find small stocks that have potential
probably robinhood top gainers 😂
but more seriously thats just fundamental analysis on stocks
@willow tide you can find bots on Option trading
@jaunty perch
can you se the "w"
idk for how long it would hold but you can scalp few pips
coming back up ? 👀
Also what happens after a w pattern downard right???
Well
Maybe a pip at best 😭
Well gn man
Heyy
I am not able to sign in to my account
I clicked on activate then what next??
@pale sluice All you need to do is enter a password (which creates one for your account)
I did that
But when i enter that password
It says wrong password
And i tried changing says cant find email
although, if there’s problems — rest assured anything you want done with your account/subscription can be managed manually by our support staff at support@luxalgo.com
may have entered something wrong @pale sluice that shouldn’t be happening
I entered the right one
But now im trying to change
It says cant find me email
My*
All there is on the customer account is the ability to cancel your subscription or update your payment info @pale sluice
If you need help with any of that, you can just ask support@luxalgo.com
Wait what do you mean by that
Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI
Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Mobile & Desktop walkthrough for setting up Lux Algo on TradingView after you've been granted access. Join our Discord: https://discord.gg/LUX | You can get access here: https://luxalgo.com/products/lux-algo
Watch the full video walkthrough of Lux Algo features here: https://...
You do it on TradingView
So if i wanna cancel?
The customer account on our website is just for managing your subscription, nothing else
And you can just ask support@luxalgo.com via email if you need anything done
so you really don’t need to waste time setting up the customer account if there’s problems like this
Yes, just letting you know, it’s not even needed to login to your account really
You can follow our guide to setup Lux:
!guide
Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI
Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Mobile & Desktop walkthrough for setting up Lux Algo on TradingView after you've been granted access. Join our Discord: https://discord.gg/LUX | You can get access here: https://luxalgo.com/products/lux-algo
Watch the full video walkthrough of Lux Algo features here: https://...
^ see the links above
@pale sluice that means you gave us the wrong TradingView username
I gave the right one
Try refreshing or Please email support@luxalgo.com with your TradingView username (screenshot preferably)
Okay
Where I can find this trade setup on 2.9 version
Can you tell me why EOSUSD is in with the alts? Or is my Robinhood giving me the wrong company for the symbol?
Ok thank you. Why is not the best for crypto? I'm new and don't know these things
@pale sluice see #👀luxalgo-news for the link
I am not able to put it on the chart
How Do i use the stop loss option of lux
I got the trade setup feature, wanna know its settings
@feral lava Hello, I would like to know in contrarian mode candle stick, the more blue is more trending? I read the instructions but not fully understand
I can't see lux indicator in my trading view , I have subscribed quarterly
I am not able to put it on the chart
@pale sluice add it to your favorites, then in your chart open the Indicator menu, go to favorites, you will see the trade setup, click on it.
@feral lava Hello, I would like to know in contrarian mode candle stick, the more blue is more trending? I read the instructions but not fully understand
@tepid sigil blue candles means there is a low possibility of a reversal happening, while a red colors means there is an high possibility of a reversal happening.
I can't see lux indicator in my trading view , I have subscribed quarterly
@edgy oxide you can't see them on your invite only scripts? If you subscribed recently wait a bit, if it takes too long email support@luxalgo.com and give them your tradingview username
Hello, how to display only the strong signals ?
Hello, how to display only the strong signals ?
@jaunty perch go the style settings, and untick sell and buy
@edgy oxide you can't see them on your invite only scripts? If you subscribed recently wait a bit, if it takes too long email support@luxalgo.com and give them your tradingview username
@shy relic I have subscribed it long back and was working fine until yesterday.. please have a look..
Question ... the last csignal gbp cad .. we have signal receive sell .. but now on trading view we go to buy but we dont have receive this information on discord its normal ?
@errant cloak that's correct
@cloud elbow what do you mean my this?
You may have your own settings
just a note, it would be useful to have some resources/notes/training for beginners or an account manager to help someone with the first steps. It seemed overwhelmed for me to understand what is happening and gave up...
Within the week we will be releasing that @errant cloak
We are going to have a totally free book on everything a trader needs to know
Education on indicators
Education on our indicators
Ect
@errant cloak yes you’re right it seems so confusing
I don’t even know what charts to look at and which trades to take
That's not how this works though, this isn't a signal service 😅
We don't tell you trades to take
We make the tools to help you trade
So for example if you're a gold trader
Use use Lux on a gold chart
The indicators we make a very easy to use ☺️ Have you watched our videos?
This is a complete walkthrough of the main Lux Algo V2 script on TradingView & how it works.
- To get access to Lux Algo: https://luxalgo.com/products/lux-algo
- Join Free Discord Group: https://discord.gg/LUX
Also how do i get the support and resistance
Its very very important you read our resources
Have a read through and you'll know everything you need
Oky
Lux algo V2 Premium just locked on TradingView and I can’t use it. Does anybody know what’s that about
@jaunty perch that could be an error
Email support@luxalgo.com and they'll fix it within the next few minutes
Why does this say Confirmation:Sell,Contrarian:Buy when the last confimation signal was a strong buy and the last contrarian signal was a sell?
Referral question please help
I have a friend that I sent my referral link too she clicked on it and it took her to the website she is at checkout is there anything else I need to do to get my referel credit?
@vernal owl that all correct
Theast signal was a sell
Last confirmation signal was a sell
Last contrarian was a buy
Looks good to me ☺️
Can we get a crash course on settings and how the ideal setting should look. All good and well we can use the bands and the lines etc, but i am sure we all bought this for the buy and sell signals. To tell me after purchasing to not follow them and use the indies is a bit daft. So can we just learn how to set it up for the charts we trade would be nice...
We are working on more documents that will be released this week
But it's always important to read through resources and watch our videos ☺️
And of course other members make their own content
I have done so more than once. All the videos are sre giving amazing buy and sells. Such so that i screenshotted them and followed them blindly and there is 3 wins per loss in almost every video. But on my chart its a 50 50
Ok 50/50 is still pretty great of course 😉
So what you'd want to do is use those signals to confirm a trade
So e.g. use a S/R or reversal zone to spot a good place to buy, if you then see a confirmation or contrarian signal then go for the buy
So if the dash says ranging, do we always look for contrarian signals?
Yep that's a good idea and a great example of how you'd want to use that information
If the dash says ranging, reversal zones and contrarian signals will be the most valuable
If you do plan to use that, I'd suggest changing your S/R filter to 5
Because that also impacts how far back the state looks back on the dashboard ☺️
I can’t get the trendline on my chart
Go to the settings and select it
I did
Okay got it
I just dislike the do it yourself mentality. It cannot be too hard to pre determine good settings for the most commonly traded assets and share it to members...
You dislike the do it yourself mentality?
It's because there are no best settings, like Klaw or Millie say, they are personal things
It's like asking for the best moving averages
It just takes a little time to learn and then you're good to go
Hello @indigo cradle i cant see the S/l and TP ratio on the 2.9 version
This is a great software. I have won more trades than loss. Nevertheless, it is important to learn how to trade on your own. Take your time and read how to set it up and enjoy. With LUX you can earn while you learn!!! Love it
@calm quail it was removed but if you look in #👀luxalgo-news you'll find a link to use it ☺️
Yep you have to spend a little time to learn for sure, no one on this planet is going to give you something that literally prints you money with 0 effort 😉☺️
thanks. I had paid my suscription 2 weeks ago, but now, i am going to use it. So I am learning how to use it. Sorry for my english
It's ok ☺️
I know. i am on the market one year from now. I am just trying the Lux
I just dislike the do it yourself mentality. It cannot be too hard to pre determine good settings for the most commonly traded assets and share it to members...
@red bough it’s impossible to pre-determine settings and it would be very misleading to recommend settings to people for specific assets/timeframes
we’re doing a good service by always saying #706894045556899933 and telling the truth rather than misleading our users saying “this setting works the best” when it’s much more complicated & that’d likely lead to our users following / trusting everything blindly and losing money
hope this helps / makes more sense
A free money printer is not what I was expecting. But thanks for the help. Will keep on trying
Why does this happen?
refresh or switch timeframe and it’ll fix @jaunty perch
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
thanks
for Apple, my dashboard, on top, says Confirmation: Sell | Contrarian: Sell but I have my settings to signal mode: confirmation. What do those 2 titles on the dashboard mean? I wish there was better documentation esp since this is a paid service, not just a free thing someone decided to share and we just have to figure it out on our own.
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
@hollow wigeon ^ it’s just our signals modes, they oppose each other a lot as they are for different styles of trading & use different methods
Does anyone in here use a certain type of settings that tells them exactly when to buy and sell
?
Like a certain sensitivity and agility
I just dislike the do it yourself mentality. It cannot be too hard to pre determine good settings for the most commonly traded assets and share it to members...
@red bough There are too many variables though. I understand what you’re saying, but let’s just take SPY for instance. Let’s say they make the claim that 4.50 & 1.90 are the best settings on the 1D timeframe. Well while that may helpful to some it’s still useless to me because I only day trade. So 1D will not transfer to the 5min as easily. Not all stocks trade the same, not all forex pairs trade the same
Does anyone in here use a certain type of settings that tells them exactly when to buy and sell
@hazy ocean I'm new here but it looks like we have to figure it out ourselves with no real documentation (they #👀luxalgo-news it's coming). Other than that, there's #706894045556899933
What pairs you be trading
@alpine loom just stocks
It all the departments on the pairs (charts) you look at different setting go w different stocks
Ahhh
Yep ^
Understandable, thanks for the tag @hollow wigeon
@red bough so what settings do you recommend for day trading? I'm new and trying to figure algo out
What sensitivity and agility do you use? If you don’t mind I’m asking @hollow wigeon
@hazy ocean I haven't taken a trade yet - I'm still trying to figure it out - having to watch people on YouTube but they're all using the older version of LA so that doesn't do any good. 😦
Damn same over here lol
@hazy ocean so it looks like if the dashboard state is "Ranging" then the signal mode we should use is Contrarian (I got this from their website)
Interesting
@hazy ocean if the dashboard says "Trending" then I guess we switch to signal mode: Confirmation
when adding alerts, can lux algo tell me direction up/down, strong buy/sell instead of direction -1/1 and strong 0/1
Example: Configuration Signal | Direction: -1 | Strong 0
when adding alerts, can lux algo tell me direction up/down, strong buy/sell instead of direction -1/1 and strong 0/1
@zinc nebula not at the same time unfortunately, thats the only way to get all the information in one alert currently. If we see the opportunity to change that we will 🙂
is it possible to change 1hr or 4hr or 1 day in alert?
for example strong buy or sell
i mean any strong confirmation sorry.
The support and resistance Feature is not available for me
I have the newest Version of the indicator
can you just show B/S or U/D
instead of -1/1, 1/0
its difficult to know what this means
@shy relic i use supply demand strategy ..can make future indicator for painting supply or demand zones next time? just my two cents
is it possible to test lux algo in the strategy tester?
@shy relic i use supply demand strategy ..can make future indicator for painting supply or demand zones next time? just my two cents
@boreal ruin sure, thanks for the suggestion 🙂
instead of -1/1, 1/0
@zinc nebula thats the thing, not possible. For "direction", 1 is buy, -1 is sell, for "Strong", 0 means the signal is normal, while 1 means the signal is strong.
what do the outlines on the candles mean? I'm seeing red/red and red/green, green/green and green/red. I checked on the resources page but it only talks about candle color, not outlines. Thank you. 🙏
A YouTuber i learn a lot from is TY he a trader and he made me understand the charts more and able to see patters w no indicators
what do the outlines on the candles mean? I'm seeing red/red and red/green, green/green and green/red. I checked on the resources page but it only talks about candle color, not outlines. Thank you. 🙏
@hollow wigeon The outlines are a TradingView thing not Lux thing. All care about is the body of the candle
@hollow wigeon ^^
Outlines usually point towards macd reversal if you watch both at the same time
Like if it's a red candle with green outline or green with red outline
That's what I've noticed anyway
Hope that helps 😅
@indigo cradle how to read the alerts example Confirmation signal | direction : 1 | strong : 1
That's what I've noticed anyway
@dry osprey I literally use MACD every trade and have never put that together lol. Thanks for the info 🤙
Hello, Have recently purhcased the Lux Algo, In the trading view i dont see any invite only options? Is i have to update my trading view platform as well ?
When you get invited it'll appear 🙂
Same here @twilit void that's how I noticed
@indigo cradle @twilit void @dry osprey @alpine loom thank you 🙏
👌🏽👌🏽
So how does the EQ cloud work? What is it indicating?
More info on our Indicator Overlay Modes: https://luxalgo.com/apps/help-center#!hc-bands-mode
Hey, New subscriber here. Where is the trade set up, where I can put my Risk Reward on Trading View?
We removed it from the main script 🙂
😦
Hey
?
It's a really bad feature victor, people always assumed it was lux telling them where to take profit
And were following it blindly
So we removed it and you can get it: https://www.tradingview.com/script/1ibzuoEv-Trade-Setup-Feature/
So it's seperate
Got it 🙂
likely have the wrong username @uncut token
email support@luxalgo.com with a screenshot of your TradingView username
and team will have you with full access right away
or, refresh the app
Ok
it may work if you just refresh
ah, yea just shoot an email to support with your username
and they'll have you setup ASAP 🙂
Hey.. regarding the Trade set up, where is the SL and Target 1 places? what is multiple of ATR?
It'll be what the user sets
I cant set it
In the settings
let me c
SL ATR Multiplier
Okay. Got it
Just my first day, Lux didn't seems good for stocks as there is gap ups and downs. Might be fine for Currency. Any suggestions?
or recommendations?
Just my first day, Lux didn't seems good for stocks as there is gap ups and downs. Might be fine for Currency. Any suggestions?
@jaunty perch gaps will always complicate someone trading :) you can try closing your positions before market close or use a guarantee stop loss.
Thank you for recommendation Alex
🙂
But it looks awesome for Currency. Lets c
Hey, Is the forex scanner, scanning as her Heikin Ashi or simple candles
normal candles
Can we change the settings?
Our Discord Market Scanner alerts all use the following:
- Default Lux Algo (V2.9 inputs)
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / FXCM / COINBASE / BINANCE
If you have created your own, custom TradingView alerts, be aware they are set per the exact settings you had at the time you set those alert(s).
But the default uses Heiken Ashi as source
Yes, which smooths signals but does not generate the exact effect of HA candles
it's near-identical
For setting the Heiken ashi strong buy/sell alert, what to select in the Options?
Only Once?
Yep
@indigo cradle looks like the idea worked😅 3 trades i took last night all profit. Although earlier today There was big movement that broke through resistances and support
Nice!!! @outer coral
@indigo cradle looks like the idea worked😅 3 trades i took last night all profit. Although earlier today There was big movement that broke through resistances and support
@outer coral is this based on a certain timeframe?
I came across 3hr chart today if you got buy or sell signal for example on eurusd now potential sell coming overnight
Wake up to profs
please update when eur usd will be a sell
Il try keep an eye on it but fee free to let me kno 😉
Btw, I thought Lux didn't re-paint? It just did on a buy signal on the 3-minute SPY, it did last week too
It doesn't repaint 😦
It doesn't repaint 😦
@indigo cradle same old
@astral crest okkk
Btw, I thought Lux didn't re-paint? It just did on a buy signal on the 3-minute SPY, it did last week too
@astral leaf signals can change on the last candle
Unlike repainting indicators, non-repainting indicators do not change their values after the price bar is closed. They normally make use of the price bars to the left when calculating their values.
This is because the Indicator use closing prices as input, and the closing price changes on the last candle
While the candle is running it goes on and off
Yep
After candle closes wont change
^
So I’ve been using Lux for the past two weeks with signals turned off, and that alone is great
RSI, moving averages, MACD all do the same 😉
I got that the first time how difficult is that to get
@astral crest i mostly scalp or trade within a day. ( i dont like holding). I trade mainly on 15-30min timeframe.
So I’ve been using Lux for the past two weeks with signals turned off, and that alone is great
@sudden walrus candle coloring is great and has the same affect:) along with other features, i do that quite a bit
But for the lux bot i change it so it calculates as if it was trading on 2hr timeframe
without changing timeframe on tradingview
so far.. is pretty good👍
then i compare on higher timeframes:) 1hr to see liquidity levels ( size of candles). If its pretty big i then take a look at dashboard to confirm
Can we have ConfD and ConfS as source for another script in tradingView ?
then for trade setups additional confirmations using a combination of other indicators to filter bad signals!
MACD.. to see trend, 200ema for long term trend (but i find the equalizer bands works just as well).
also their own free script for support & resistance levels helps out alot haha
On a 1m chart I've noticed the indicator indicators will appear/disappear randomly. I was watching $GM and there was a huge red candle with a RED STRONG alert then it disappeared
!confirmed
A signal is confirmed only once the candle is closed. Meaning a signal could appear on your chart but is not confirmed until that candle is closed and the next candle has started.
Our automated Discord bots will never notify you on any signal until the candle has closed and confirmed it. If you're adding alerts for Lux signals in TradingView - make sure to select "Once per bar close".
@indigo cradle It happened a couple times... but then I made a video and it DIDN'T do it.. grrrr https://www.loom.com/share/90c47ec445db4685aba466447948767f
@jaunty perch is there any possibility that bot can send alerts of 1hr trending stocks forex ,commodities...
How do I change color of Lux Oscillator and could you identify Bar Color setting in style please? I’d like to change color a little, but there are 13 bar colors and I don’t know how to identify each bar. Is there any default color setting just in case I mess up?
@runic herald
I’ll have to look into the bar coloring more. I haven’t checked since the 2.9 update- haven’t needed to since I keep mine at default
@twilit void thanx!! I changed it!!
a question for the wise: what is the best platform to trade BTCUSD?
I think I mess up bar color !! Could you post default pic when you get a chance please? I need to reset to default before I mess up more. Thanx in advance 😀
I think I mess up bar color !! Could you post default pic when you get a chance please? I need to reset to default before I mess up more. Thanx in advance 😀
@runic herald you can do that ^ or remove lux & re-add
@runic herald
@twilit void thanx!! I’ll do that!!
!scanners
You can find the scanner signals in these channels if you have signed up with us and have the VIP role:
#695668653869236433 #695732700991979601 #695668580301144064 #695668800044925009 #695668811784781874 #695668827937177660 #695732857959612566
Included in the channels are thousands of TradingView alerts created on the Lux Algo V2.9 default settings.
Learn more about how they work here: https://luxalgo.com/apps/help-center#hc-automated-market-scanners
Hi...i want to setup alerts for STRONG BUY on 15 mins,1 hr and 1 day... how do i do that?
!alerts
How to set up your own custom alerts in TradingView: https://luxalgo.com/apps/help-center#hc-creating-alerts-on-tradingview
Select Lux Algo as condition
oh actually no you got it
just select
"once per bar close"
what do i select in the "Greater Than" dropdown?
ok
instead of AAL
and then Once Per Bar Close
these are the options too for setting alerts with Lux Algo v2.9
no problem, im currently setting up like thousands of these for our scanner channels haha
lol...one more question...can i combine the alerts...say i want to get notified only when it is a strong buy on 15mins,1 hour and 1 day?
it's just per timeframe
got you...thank you for the quick response...appreciate it 🙂
no prob!:)
You can login to your Lux Algo account to manage your subscription if needed here: https://luxalgo.com/account/login
Or email support@luxalgo.com and our team will assist you with any request the same day.
or login ^
can't help with orders via Discord @cunning topaz
Team will make sure you're all set soon @cunning topaz
our team will within just a few hours @cunning topaz
no problem
@feral lava hello what’s the difference between a buy and a green strong? Is green strong means strong buy? Thanks
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
Strong just means there's a higher probability for it to play out / the market is likely trending
Strong just means there's a higher probability for it to play out / the market is likely trending
@feral lava so we use strong along side with buy/sell, meaning that it is trending in that direction?
Strong signals are essentially the same thing as buy/sell signals, they are just higher likelihood the market is trending in it's direction
Strong signals are essentially the same thing as buy/sell signals, they are just higher likelihood the market is trending in it's direction
@feral lava so they are stronger buy/sell
yes @tepid sigil they are considered higher probability signals more likely to be going with the trend
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
@feral lava just a quick question about Alert conditions... when you select Any signal option, will the indicator send both confirmation and contrarian signals plus also Strong alerts for either confirmation and contrarian?.
yep it will send any signal including all those mentioned ^
@feral lava thank you for the feedback
yes @half pollen
How an I deactivate the auto purchase?
I just had the same question
!login
You can login to your Lux Algo account to manage your subscription if needed here: https://luxalgo.com/account/login
Or email support@luxalgo.com and our team will assist you with any request the same day.
Email support@luxalgo.com is best way if you can't login, team will help you asap @half pollen @left nest
@cunning topaz Any order releated question go to support@luxalgo.com
!list
Below you'll find a list of assets our Discord Market Scanners cover.
(Timeframes include: 2H, 4H, 1D, 1W on each asset with standard Lux Algo V2.9 settings & Normal Candlesticks)
STOCKS:
FB, AMZN, AAPL, NFLX, GOOGL, TSLA, BA, DAL, AAL, LUV, UAL, ROKU, AMD, NVDA, CMG, SHOP, RCL, CCL, NCLH, SQ, ZM, MA, V, SPCE, SNAP, MSFT, BABA, QQQ
FOREX:
GBP/USD, EUR/USD, USD/JPY, USD/CHF, AUD/USD,
USD/CAD, NZD/USD GBP/CAD, GBP/JPY, GBP/CHF,
EUR/GBP, EUR/JPY, EUR/AUD, AUD/CAD, AUD/JPY, AUD/CHF
NZD/CAD, EUR/NZD, USD/ZAR, EUR/ZAR, GBP/ZAR
CRYPTO:
BTC/USD, ETH/USD, XRP/USD, BCH/USD, LTC/USD, BNB/USD, EOS/USD, XTZ/USD, LINK/USD, UNI/USD, YFI/USDT, DOT/USD, ATOM/USD, ADA/USD, OMG/USD, ETH/BTC
INDEX:
SPX, DJI, IXIC, E100, CAC40, DAX
FUTURES
ES1!, NQ1!, GC1!, BANKNIFTY1!, BTC1!, NIFTY1!. YM1!, SI1!, ZN1!, CL1!, ZF1!, 6E1!, ZB1!, 6J1!, RTY1!
COMMODITIES:
XAUUSD, XAGUSD, XPTUSD, USOIL, SUGARUSD, ZR1!, ZW1!
!scanner
!scanners
You can find the scanner signals in these channels if you have signed up with us and have the VIP role:
#695668653869236433 #695732700991979601 #695668580301144064 #695668800044925009 #695668811784781874 #695668827937177660 #695732857959612566
Included in the channels are thousands of TradingView alerts created on the Lux Algo V2.9 default settings.
Learn more about how they work here: https://luxalgo.com/apps/help-center#hc-automated-market-scanners
What happned to the support and resistance lines that you guys use to have the red and blue one?
I can't see to fine then anymore
On our TV profile
Be warned they use pivot points 😉
I know they look pretty but they do have some downsides
You have to click add to favorites @slow comet
and then add them from your favorites in indicators section
I have the #767943749627019324 channel muted and notifications set to "nothing" but I'm still getting the red circle notifications. Am I doing something wrong?
turn off @ mentions in that channel @hollow wigeon
turn off @ mentions in that channel @hollow wigeon
@feral lava Notification Settings > Nothing
Oh, should be working then
I keep getting notified tho - strange...
I have this channel both muted and Notification Settings > Nothing
Hello, i cannot find the ARK ETF on Trading View. Can you please assist?
and I have these channels both muted and notifications set to none but still get notified. Is there a setting I'm missing?
Quick question: is there anyway to run a scan of US listed stocks that are getting a strong buy signal today?
Is there a guide that will teach us how to use the reversal zones ?
!overlay
More info on our Indicator Overlay Modes: https://luxalgo.com/apps/help-center#!hc-bands-mode
Also the members of my group are interested in the Tool is there’s like a discount if I can get a lot of people to buy Lux ?
Thank you sm
@indigo cradle
Reason: Bad word usage
@young osprey Sorry hahah
and yep - we get a lot of things like this appearing sadly
ok - why was I warned . _ just trying to be helpful
no worries at all ahhaha
So will Lux stop them?
Can someone explain how to use the ATO for me please? Never tried it before
@young osprey Nah nothing we can do really - just report it to TradingView
Is there any suggestion for trading Stocks via LUX. I am not finding anything anywhere and I don't want to trade forex or crypto
Any training videos or anything?
yes
!guide
Full Mobile + Desktop YouTube walkthrough for setting up Lux Algo on TradingView: https://www.youtube.com/watch?v=Zw-XBVaIOvI
Link to the setup guide on our website: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Mobile & Desktop walkthrough for setting up Lux Algo on TradingView after you've been granted access. Join our Discord: https://discord.gg/LUX | You can get access here: https://luxalgo.com/products/lux-algo
Watch the full video walkthrough of Lux Algo features here: https://...
ohh dont watch that
This is a complete walkthrough of the main Lux Algo V2 script on TradingView & how it works.
- To get access to Lux Algo: https://luxalgo.com/products/lux-algo
- Join Free Discord Group: https://discord.gg/LUX
@jaunty perch
I saw that multiple times but it is all based on currency.
what are you looking for?
I can try my best to help @jaunty perch
Nothing working when I am trying to apply it on stocks
okay do you have the indicator on your chart?
luxalgo
yes
like are you seeing signals or are there different issues
all signals are here
but most of them are missing trends
like, do you have them on your own charts?
or strong is hardly giving any profit
as per usual observation
try using signals on 2H and then trading on 15m or 30m
alot of people use that basic strategy when starting
if I keep a SL or trail SL for short profit, it will hit for sure in all cases
day, 2 hr 4hr
you know I am a bit confused and don't think I can help you too much try talking to @indigo cradle or @feral lava
Your message could not be delivered because you don't share a server with the recipient or you disabled direct messages on your shared server, recipient is only accepting direct messages from friends, or you were blocked by the recipient.
I meant as in one of these discord channels
not in dms
this is message when I wrote to Gecko
message mack
IK he has pms open
!signals
Learn more about our Buy & Sell signals: https://luxalgo.com/apps/help-center#hc-buy-sell-signal-modes
thanks mack
Hey @jaunty perch the signals are not meant to be followed blindly
you know I am a bit confused and don't think I can help you too much try talking to @indigo cradle or @feral lava
@jaunty perch I am there to yknow
Hence the name of course
The developer can maybe help xD
Hey, don't mind me asking, If I cancel subscription, can I get Refund. I just subscribed yesterday. I don't want too much confusion. Macd alone could be enough for me to trade
You can request anything relating orders at support@luxalgo.com @jaunty perch can't help via Discord.
!login
You can login to your Lux Algo account to manage your subscription if needed here: https://luxalgo.com/account/login
Or email support@luxalgo.com and our team will assist you with any request the same day.
Okay. Thank you
If it's not for you, im sorry to hear, we can't match everyones trading style - you may like using more simple indicators and that's ok! Wish you the best @jaunty perch
@jaunty perch Technically you haven't given it a shot if you only got it yesterday. 🤔
As I am seeing it, It is no use for stocks.
And in forex, it is hardly hitting the second target and missing most of the rising trends
I mean "Strong" don't always catch a trend
Sometimes
it do
@jaunty perch there is tuning that goes into it
and band usage
Band Usage?
Definately takes time to use it 🙂
@jaunty perch we try to make it clear, there is nothing that can "always" be correct in the market, these are tools you can use together to make your own strategies out of rather than follow the signals blindly
You can of course adjust settings to help this
!settings
More info on changing the input settings on Lux Algo: https://luxalgo.com/apps/help-center#!hc-adjusting-input-settings
I looked into it. But I think, after doing a backtest, I should pass it. For forex, my Simple MACD strategy is way better than making things complex.
Sorry for that
if you prefer MACD that's fine, but of course we don't just offer signals 😉
Not everyone uses the signals
Some just like the S/R
or oscillator
candle colors
ect
All it takes is one feature that helps and can change a strategy for the better
but if it is not working, what's use
@jaunty perch with good tuning you could still have success
I mean certain settings work very well
Yeah of course 🙂
depending on asset/market condition
#🤝support message I see that but where is Strong? Shall we work on "Strong" or jus Buy Sell?
its contrarian
It's important to explore 🙂
good setting for trending markets also work well
but its all personal yk
Signal mode Contrarian?
those are confirmation signals on the more recent one
Confirmation-Trending Market
Contrarian-Ranging
Hi just joined this group. I was wondering what kind of exit strategy some of you are using incase a trade goes against you? Opposite signal is a bit tricky in my opinion as the SL might be very far and the trade needs to be followed
contrarian mode is in ranging and confirmation in trending. Right?
generally those signals match up better yes
but you do have to change it yourself in settings
And the dashboard tells us if it is trending or ranging
