#🤝support
1 messages · Page 199 of 1
Explains why uk so much
Only been 2 months into this and im negative 700 of some stupid shit
I appreciate the compliment
I can tell you though... Lux warped my brain and retrained me
I feel new all over again
Interesting thanks for the tips💪
Trading is much less stressful when you become a trend trader and less a technical trader
At least - for me
I have the mind for technical trading, but not the personality
Should I have "use HA source [locked sensitivity]" ticked in the indicator setings when I'm using HA candles, or is that setting to try and improve performance while using regular candles? Can't find an answer in terminology.
HA source is for normal candles
Thanks! Anyone have any tips on further optomizing settings for regular candles or is that more preference?
Could anyone give me some tips on using the lux algo bot?
Script lol
ya..
I think a lot of people think it's going to do all the work for them... so i like to clarify
use it along with strategies you like to use - take a good month to test it out on a demo account
That's what I did... I messed up for a few weeks until I got the hang of it
But definitely be in touch with people here; super helpful community
lux algo bot??? you mean the indicators right?
Got it sorted, @dapper vapor . 🙂
it's funny though! no worries
i am in the bathroom 💩 doing serious business.. forgot toscroll up
haha!!
@jaunty perch make sure you test out the indicators using different time frame
I heard I can setup my own alerts for charts less than 2 hours. Can someone point me in the help center on how to do this?
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
Purble candle after the sell signal is that is take profit for the last buy signal or the sell signal ?
and if it is for the buy signal how can i Distinguishe ?
It depends how you trade
@indigo cradle How ?
Well it can mean either
!terminology
Of course it wouldn't be TP for the short because it literally is next to the signal
So if you are using them as TP then it's maybe a TP for the long
i mean i know place sell order after i saw the sell signal so as you can see the signal it self is purble
Yep it's a system, we just suggest how you use it 🙂
So you can use the purple candles the way you want
The resources page does a better explaination than me
Ha source?
yeah
It's for normal candles. It will use the Heikin ashi candle data for signal generation on the normal chart
It's up to what you prefer 🙂
See if you like using it
We just make the tools, you decide how you use them 🙏
Or what parts you use
I see you tell me every single Question i ask you " it depends on you "
Yep because it's a bit like asking for the best moving average
On web site you wrote that it`s for beginners and friendly
It is
For beginners use HA source
I just always assume people aren't beginners
Which is my bad
But yes, on normal candles we recommend HA source
Which is my bad
@indigo cradle If I`m not beginner why i will use Lux algo or any signal system?
But yes, on normal candles we recommend HA source
@indigo cradle Okay i`ll test
Lots of experienced guys use it
For confirming trades or using other features
Eg trendlines
Or oscillator
Or anything else
Okay but they have their own strategy
Yes sir ☺️
So i see lux algo is awesome but for advanced people Only
Yep basically on normal candles stick with HA source
@indigo cradle Okay
Nope it's pretty straight forward I think
I will test with 50$
We try to make it a nice balance
Okay
Ahhh ok just checking 😉
You'd be amazed how many people don't
So always worth double checking 😂
Hola amigos
hello!
Looking forward to begin testing
I'm trying to put m30 in a few instruments and it's not working. Any other timeframes work properly
I can’t replicate the problem. What the “!” Say?
Email support@luxalgo.com so we can check the problem further @deep moat
I read up on the Oscillator but I'm still not quite sure how to use it to affirm decisions on buy/sells anything else I can read on or tips?
I can’t replicate the problem. What the “!” Say?
@twilit void take look if u have another timeframe in settings. sometimes they have problems
It's working now
@mystic gale as far as more in depth learning on what oscillators are, check out investopedia. As far as using Lux’s, the short explanation is don’t take a “sell” signal if the oscillator is blue, don’t take the “buy” signal if it’s red and look for divergences
cheers 🙂
on my trading view chartsm which market is best to use? My tradersway account and the FXCM and KRAKEN markets on my TRadingview have different price
Are you using HA candles?
heikin ashi
Heikin Ashi Candles explanation: https://luxalgo.com/apps/help-center#!hc-why-heikin-ashi-1
so whats the best to use to show real value
Heikin Ashi Candles explanation: https://luxalgo.com/apps/help-center#!hc-why-heikin-ashi-1
It explains
ok. thank u
@vast parcel in TradingView, click on the chart settings button, then symbol, there’s a box you can check to enable real prices instead of HA prices
When I click on the script in Tradingview it doesn’t open up? I’ve refreshed and followed the video. Do I need a certain Tradingview account to make it work? Any help is appreciated. Thank you.
What are the best settings for day trading forex?
@fossil pewter Nope it should work with free - are you sure you gave the correct usename?
@agile fractal Depends on the pair and timeframe
There is no such thing as a best setting
Should add to your chart
You definately have access
Try in a new browser
Or incogneto
^ Or that
try remove one then add that 🙂
Ok. I’ll check again. Appreciate it.
Do we have to give them our TradingView username ?
Wow I gave them the wrong username
Ok thank you!
Thanks @mystic gale 🙌🏽
np 🙂
i put the algo on trading view website on the computer, but how do I put it on the trading view app
& will i get alerts on my phone?
You just open the app and add it the exact same way
If you set alerts yes
and if you're on the discord
email support@luxalgo.com so we can check your account/username @red iron
Ok thank you
Hello people. I have the same problem. I payed yesterday, emailed the support and the script is still locked for some reason
I'd suggest emailing again
Sometimes if people give wrong usernames it delays things by a day or so 😦
ok. thank you
how did the stock bot miss WMT today
!list
The following is the list of assets our Discord Market Scanners cover.
Timeframes include: 2H, 4H, 1D, 1W on each asset with standard Lux Algo V2.6 settings & HA Candles. (no toggles enabled).
STOCKS:
FB, AMZN, AAPL, NFLX, GOOGL, TSLA, BA, DAL, AAL, LUV, UAL, ROKU, AMD, NVDA, CMG, SHOP, RCL, CCL, NCLH, SQ, ZM, MA, V, SPCE, SNAP, MSFT, BABA
FOREX:
GBP/USD, EUR/USD, USD/JPY, USD/CHF, AUD/USD,
USD/CAD, NZD/USD GBP/CAD, GBP/JPY, GBP/CHF,
EUR/GBP, EUR/JPY, EUR/AUD, AUD/CAD, AUD/JPY, AUD/CHF
CRYPTO:
BTC/USD, ETH/USD, XRP/USD, BCH/USD, LTC/USD, BNB/USD, EOS/USD, XTZ/USD, LINK/USD
INDEX:
SPX, DJI, IXIC, E100, CAC40, DAX
COMMODITIES:
XAUUSD, XAGUSD, XPTUSD, USOIL, SUGARUSD, ZR1!, ZW1!
You can set WMT yourself but it's currently not in our scanner list
how
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
DM'd - will help you out here @past ember
support@luxalgo.com for help with orders/payment
Just looking for verification. Stock signal is a buy however the lux control says bears 1170.34% . From what I read that shows a possible reversal is going to happen? Can you verify what exactly that means please when its a buy signal yet lux says 1170.34% bears
What asset?
I mean it can go over very very very rarely
But 1000% must be some pump or dump to 0
Worx
Ok thank you. Just wanted to make sure I'm understanding
Thank you
Does this work after hours?
It can but we don't recommend
Ok, if I were to do it how would I?
Where can I go to get a full overview explanation of everything in entirety?
!resources
Link to our Help Center, many common questions can be answered here: https://luxalgo.com/apps/help-center
hi
i received the script access on my tradingview
so i am trying to figur out where my chart is going to.. i am doing crypto. mainly btc
on the 4 hour chart, LUX shows me.. a trade to enter at current price, a stop loss around , 11598 and 2 targets tp1 10275 and 10026 .. it's super low. my question about this. how reliable is this, and how much time could this take?
Sorry if this has been stated somewhere else but is there an ios app for Lux in order to receive updates? I see it in the settings but don't know where to download.
The tagets and SL are not to be used blindly along with the signals
They are for traders to use before they enter a trade and want to calculate R;R
They are not what we suggest to target necessarily
@formal sphinx Nope we will email when there is an update
It works via tradingview
We are always scared people use the trade set up with the signals
The usecase: if you want to enter a trade and want to set a SL and use R;R to make a TP zone, you load it up and it will calculate
ok. then maybe i adjust my question, how reliable is the outcome of the module telling me that we will likely go further downwards?
!backtesting
Information regarding back-testing data and % accuracy: https://luxalgo.com/apps/help-center#!how-accurate-are-the-signals
ok i will read the docs further. Thanks.
99% of major qns are in there 😄
the Lux Volatility is usually a good indicator for how long the current swing can go
hello, what are the best settings to use Lux in H1 please ??
I am trying to enable to oscillator indicator but only the volatility indicator is appearing at the bottom, am I doing something wrong?
You can only have 3 indicators loaded on the free TV at a time
You must have >3 added
Remove volume for example
ok thanks i will give that a go
I set 5,2,20 on Lux in H1
cna we create conditions? trying to set an alert for lux algo to send me alert with respect to vwap (sell below vwap, and buy above vwap)
You can with price, unsure if TradingView would be able to set an alert with those exact parameters though
would be great to do so
@indigo cradle just a heads up. Idk why it does this but when Im my phone the Signals wasn’t showing up for trading view but when I’m on my laptop(mac) it shows all the signal. Just a another glitch you guys can take a look at
I’m sure @indigo cradle could correct me as I don’t actually code Pinescript but I think he’d need to add vwap as a toggle option
^ yep
Spot on millie
@cedar pollen No clue at all but it's not really a code thing - we are working on efficiency this month
So maybe that'll fix
@cedar pollen my iPhone alerts come through fine. Do other TradingView alerts come through?
Got you just want to let you know
just to clarify, vwap does not work in all instruments, but most of the known ones yes, and it's one of the best
The signals are no problem to hit my phone @twilit void but the display signal to show the sell or buy signal was just bothering me but other than that it works good
All processing is done server side so it's odd
Pine is compiled server side
Shall investigate
But never heard of this
I find sometimes one or two people have random anomalies
Nahh you good @indigo cradle I know you guys are doing a lot just trading view been acting funny with me thing week but I hit them up today about slow load charts and as well with random glitches to my chats but other than that it works
I have the same on iPhone. It’ll be good then the whole chart will go white. Just gotta close and reopen the app. Fix
👍🏾🙏🏾
@indigo cradle I’m trying to trade GBPUSD on trade viewing And when I try to trade showing I gotta have a min of 1300 if I do it on my mobile forex.com it shows $66 margin at .10¢ a pip ..?
@indigo cradle if you can please
@edgy trench nah but lots of people pair the two up
I think ginskey does
They make a good combo
lux is also good for 1min scalping
@edgy trench do you use lux for scalping? I’m interested to know your setup, chart times etc. as I’m keen to try it for scalping
@edgy trench same!
On your 2nd screenshot, does it not show you’re buying 1000 units of GBPUSD, making it worth $1,319.79, which is the same cost as the 1st screenshot?
TV shows it as pip value .1 , forex app as $.10 so those are equal
Does not look like TradingView is displaying the margin amount though.
You linked your forex.com broker to TradingView I assume? The trade value would be $1,319.79 so TradingView isn’t wrong in that case.
I don’t trade forex so I’m typing as I’m thinking 🤔 lol
@indigo cradle can you recommend the best set up in terms of sensitivity etc. @uneven summit be interesting to see results.
He’ll the same thing it says on their website
Depends on the asset, timeframe & trader
There are no “best” settings.
That’s why on their site to explain how to adjust the settings to fine tune it to your style
How can i find the candle optimzation toggle?? I cant found it
It's called HA source now 🙂
Ahh ok
Hey i ordered the annual membership but forgot to put the 10% discount code SG10, any way i can still get that discount added to my account?
Ok thank you 🤗😊 just curious
Where is lux volitiilty??
@indigo cradle can u explain what this number represents? See red arrow
Where please ?? Screen i cant find lux volotilty
Is it the time frame ?
Crackerjack how did u opened lux volitilty on phone?
My lux is giving study error this morning. Removed, saved, and turned back on with no luck. Can you please help?
What does the error say exactly?
Study not auth
Email support@luxalgo.com 🙂
I did. No reply
Email again and they should reply 🙂
Where is invite only acrpit
!guide
Quick link to our User setup guide: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
@indigo cradle I can also confirm Lux Algo and Lux Volatility are not working since 9AM US EST
Do I need to send a third email to get a response?
No corey
Both operational on Tview this morning until about 9AM. I’ve made no changes to my charts. Both give error saying “Study Error”
That'll be because support would have removed you for some reason
let me check
If you get "Study Error" it means you were removed - maybe mistakenly
shall investigate
Same here, paid quarterly.
Shall get this fixed
@median kettle Support are fixing it now
@sage pewter Could you please email support@luxalgo.com
Ok
Just to let them know and it will be fixed very fast
Emailed. Ty
How do we overcome this error?
How do I set a buy or sell alert for when the buy or sell pops up on the chrt?
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
anyone good with pine script?
I mean i'd hope so
@indigo cradle I’m dying 😂😂 💀
lmao can i dm for a question i have
hahahah my dms are closed for security but you can email development@luxalgo.com
I haven't had a good start using lux algo, I think I'm doing something wrong. I'm trying to trade XAUUSD but I'm constantly losing to it. I know that it's very volatile pair. I was thinking of doing swing trading on currency pairs. Is lux more suited to swing trading and is 4h the best timeframe for it?
It’s good all rounded swing/scalp @magic girder you just have to your own rhythm with it. Right I’m good at intraday trading but I usually do that on the 30 minute or 1 hr timeframe. If I’m looking to hold a pair for a day or two I’ll trade off the daily or 4h timeframe. Right now I’m practicing scalping every single day on my demo/ live and I’m getting good each and everyday with it. Just overall find what works for then you’ll see the money come inn
As far as 1 day or 5 day or 1 month charts, does changing the candle timing at the top left of trading view app effect the proper outcome of the buy / sell / take profit? And as far as a one day chart vs a five day or one month chart, is the the estimated “ take profit” for roughly the same? Or is it just a number based on what the chart says then, and could be any amount of time forward? ( like if using the 5 days chart vs one month chart, I’m assuming the 5 day TP is for a few days out versus the one month chart TP is for weeks
@indigo cradle what are this gray and purple candles again?
!terminology
Lux Algo V2 Signal Terminology: https://luxalgo.com/apps/help-center#!hc-signal-terminology-1
That says it best
thanks
I am confused do I have the vip I pay for i emailed customer service they said join here
I keep telling them this isn’t my user name
What’s main indicators lux algo are based on?
I set up an alerts on TradingView and downloaded the app and I haven't been receiving any alerts on my phone. The website shows the stock I have been keeping an eye on did have alerts today.
@indigo cradle
@untold pendant Yes you're a vip
@robust arrow All confidential 😦
@balmy basalt Do you have push notifications on?
Yes I do have them on
Did the alerts trigger in your alert log on TV?
No they did not
How do I show you the settings?
On your app click on the clock with the + icon
If you go to your log is the alert there?
And alerts enabled on your phone?
hey guys, for the past two days i've noticed the plugin not painting the next candles immediately (whether on the 1min or 5min) I'll have to reload the page and a couple of times before it starts functioning again. any suggestions?
yea i’m assuming that it’s just because the market is closed ^^^
I usually trade multiple sessions so I forget which day it is sometimes
Is there a way in TradingView to auto trade with the Lux but/ sell signals . For example as soon as a Lux buy signals your trade is executed with a linked broker? Auto trading bot ?
Based on Lux algo
no lol. . . i know the market is closed lol. . i meant during the hours it was open
lol
I’ve seen others talk about it on here, @indigo cradle just was the other day. They run a custom script in python too and blend it all. So it can be done, it’s not “easy” per se
@quaint halo
@hearty lily the only time I’ve ever had issues with 1m/5m candles is when I didn’t have real time data
yeah, that wasn't the case, i was monitoring XLNX for the sale flag. . at 7:58, it hadn't painted candles since 7:55 on the 1 min chart.
thats just one example
trading view doesn't do auto trading
the only trade bot which works with trading view signals is 3commas which is kinda expensive for the package that allows that
which is why I'm making my own 😉
thats not what i'm talking about. . . im simply talking about the candles not being painted on time
@twilit void do you know if LUX has step by step videos on everything works and should be set-up
Their 2 sites should help
Thanks! I deleted the app and reinstalled it, let's see if it works on Monday
The videos helped me when I first signed up
Hi my bot shows study error if you can help please
As far as 1 day or 5 day or 1 month charts, does changing the candle timing at the top left of trading view app effect the proper outcome of the buy / sell / take profit? And as far as a one day chart vs a five day or one month chart, is the the estimated “ take profit” for roughly the same? Or is it just a number based on what the chart says then, and could be any amount of time forward? ( like if using the 5 days chart vs one month chart, I’m assuming the 5 day TP is for a few days out versus the one month chart TP is for weeks
tp is based on atr, so for any tf will differ
Hi, what is the better broker to connect to Tradingview using LuxAlgo? thanks
trading connector turns trading view alerts into market executions on meta trader 4
trading connector turns trading view alerts into market executions on meta trader 4
@kind sail really? link?
I found it. Quite pricey
Hello
I need help trading the indicators
Does anyone have the settings for each time frame
I’ve made money with this indicator and lost money as well and I’m at the point where My losses are 3x bigger than my wins
Sounds like you need some risk management
But it depends on the asset
I'm assuming you're only using the signals?
if i entered a trade with 1 lot in 1:500 leverage whats the pip price should be ? how much margin should i have to enter this ? im talking about the standard price for example Eur/usd
Guys how can i trade news? I mean of bad news happen how can i trade? And how to know if its bad or not for stock?
wait for the news to hit, and then it will reverse to the original trend
unless are extremely moving nes
*news
affecting long medium to long term
@buoyant siren buy the rumor. Sell the news 🤓
When do y’all enter a trade after you see a strong buy or sell
!risk
To learn more about Entries & Risk Management with Lux Algo V2: https://luxalgo.com/apps/help-center#!hc-entries-risk-management
Hello is there different numbers for sensitivity for lower time frame like 5, 15, 30 min or you use default for all time frame ?
Default is right for me, but you can play around the settings to see what works for you
Yea currently testing them just wanted to know if people use different numbers for low tf
Does this work for options?
I use 5 min and 15 minute timeframe
Anybody tried passing ftmo challenge with this indicator?
@celest tiger I would like to try too
@indigo cradle are u able to share how you are sending alerts to MT5 for your auto trade signals? Not looking for you to share any strategies specific to the lux algo just trying to work out trading connector from pine editor to MT5 and looking for example of how those alerts fire
If you are auto trading from TradingView
We don't auto trade or do anything with MT5
There may be others who use it like that
But not us
Oh ok I thought someone mentioned u may have
@indigo cradle are you using Trading connector ??
Nope
@indigo cradle do you trade manually or automatically?
Ah ok
Could this program be used for options
Yes @proper wave
I hope Lux Algo can send the signals straight to my phone text message . Thats would be nice :).
Guys how can i make siginal appear more eariler? Is it possible even not to wait untill confirmation
Set alerts for the lower timeframes
Whoever is up check out all gbp pairs
That’s my only inside tip I’ll give y’all
why?
It’s a bank holiday for London so up gbp is very weak now
@urban sun you can set alerts in TradingView and those alerts can be sent directly to your phone,
@buoyant siren lower your sensitivity if you want more signals. You can even take it a step further to be alerted “once per bar” or “once per minute” instead of bar close. Just keep in mind the more aggressive you become the less accurate it’ll be
anyone else having problem with the dashboard not fully showing?
@silk acorn you are using the lite version
Load up main Lux script
Go to settings
And turn it on from there
got it thanks!
Email support@luxalgo.com @brittle fulcrum
@gritty dove email support@luxalgo.com
Guys whats happened with splits?? Can i make profit with it?
I mean if i was bought it yesterday so i can made profit rught
Reason: Bad word usage
Hahaha sorry Raul
You tried to at everyone
It auto mutes
For 30
But email support@luxalgo.com and they'll give you access
Question, when the volatility is low, then a move happens and the volatility percent goes up, does it go all the way up to 100%? then the next signal generates?you kinda just ride the volatility??
The volatility is just a rating of 0-100 so it may not go to 100
It's literally just a measure of market volatility
So an example use case is "if below X% don't trade"
Because you don't want to trade a flat asset
And if it's crazy high the move needs a cool off because it cannot maintain this level of crazy
Hello support . I still do not have the chart access In my TradingView
email support@luxalgo.com @zinc remnant
Already did
@LUX are there any ideal settings to use for binary options?
i bought lux about 2 or 3 weeks ago and i havent been having any results
@timid sedge really i just bought it today😩
??
i never seemed to find the right settings for me
Sombody know best settings for cryptos?
Anyone having issues, as always please email support
Anything with access we can't help here
@indigo cradle when I configure an alert in tradingview based on lets say "any strong" on a 2H chart for an index lets say, on what calculation settings (sensit/smoot/agilit) the alert will be generated? I wonder because I received the alert but when I look into the chart, no alerts on any chart with settings different than the one chart with those certain settings are displying the signal... so what settings are the valid ones for the alert?
how to configure alerts?
@jaunty perch it will use the settings you have on the chart. It includes "normal buy turn strong" which doesn't print on the chart. That's when purple candles turn green which may be why you don't see it
@cedar cypress !alerts
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
@jaunty perch it will use the settings you have on the chart. It includes "normal buy turn strong" which doesn't print on the chart. That's when purple candles turn green which may be why you don't see it
@indigo cradle interesting, I would though the alerts were saved into tradingview using some dark mechanism but I see it saves the alert with very specific configuration parameters based on the chart settings you are using... this is because I have two exactly identical charts displayed with the only difference being the Algo V2 settings and one popped the alert and the other one no of course, but the alert would not reference which one unless of course I put a text in the alert to tell me which chart settings is generating the alert for me to quickly find the chart and look further...
@indigo cradle is your tradingview frozen for nasdaq and SPX?
Hello! How do I setup tradingview on my phone.
How do I setup the forex list and have them all on lux
Also how do I choose and have forex currency on my list
I can’t mass select all currency
@indigo cradle - I found out that there's a glitch somewhere with TV and alerts. If you have alerts set up and change the settings of the algo you need to create a new alert. I trade 27 currency pairs and I was getting a bunch of alerts that where not on the charts. I remembered I changed the settings and when I tested the old settings all those alerts showed up on the chart. So every time I change the settings I re-do the alerts.
Yep that'll be the case
It's not a glitch though, they made it like that
Otherwise it would be annoying for people who may change their chart settings
Is there a discount code if I want to upgrade to annual subscription.?
Thanks
does lux work with tradingview mobile app
@potent forum yes it does
thanks love
You're welcome
how to set alerts as notifications?
How do I find the Lux scanner on the laptop
Likely because you have too many other indicators on your chart
remove other indicators and then try to add
Hey, I'm kinda confused here. Just got access, but what to i set alerts to?
there are just alot of options 😂
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
!resources
Link to our Help Center, many common questions can be answered here: https://luxalgo.com/apps/help-center
Thank you @feral lava!
Hi, is there a suggested setting for FX trading only?
!settings
More info on changing the input settings on Lux Algo V2: https://luxalgo.com/apps/help-center#!hc-adjusting-input-settings
No, not specifically for forex
hey guys quick question! when you set an alert on trading view for a strong buy/sell does your alert only go on after 1-2 bars later ?
or am i doing something wrong ?
Hmmm very odd, are you using default settings?
All fine, in your alert logs what time is the alert coming in?
for this trade GBPAUD 30 minutes, the signal only came up after the 3rd bar
when it was ar the new resistance
You should get alert on the candle close with the signal
Hi
Hi ☺️
Please someone can help me to set correctly the alerts on Tradingview?
I would like to see the currency pair and the buy or sell signal and the SL limit what has been generated by lux algo.
For example:
EURUSD
Buy
SL: 1.15000
What i should write to messages?
I can write that out for you in a couple of hours?
how do you get the display box with the suggested stop loss displayed in it?
Just got access
Good evening all. I’ve been playing around with the settings trying to determine the best set up. Does anyone have some suggestions for forex on a 2hr chart?
I’ve only just come across the alerts on TradingView for strong signals. Think it’ll be worth signing up to the premium to receive signals on the currencies I trade.
@indigo cradle my friend asked me about the cancellation policy for your monthly payment and don't know about it
You can cancel any time 🙂
@still saffron hmmmmmm
oh no
very odd nils
Try another asset?
All assets the same
Currently getting the same issue as @still saffron
Anyone else?
Have you tried removing and re-adding?
Yes I tried it as well
Yea I just email you guys about this
oh god
Don’t know why it’s happening a lot
Me too on the memory error!!
😦
Here too
Give us a little bit guys
Yep on it now
hmmm I don't get it
Can I see your settings?
I need to try recreate it
Yep I don't get the error
Maybe a TV error ... now I removed al indicators and all assets are frozen
Yeah I see it
It's when you have everything enabled
With trade setup in particular
Will investigate but in the meantime it looks like you can't enable everything at the same time
This is the issue with adding too many features hahahahah
These are my setup but have the error
@indigo cradle Seems to really be Trade set up that's causing memory leak
I’m still about to get my signals but idk
Yep getting the same error
Yep it's just trade setup
Just made an annoucement
While I try and fix if anyone asks just let them know it's small blip
Can someone help out it was working fine till it said this
Read #🔊announcements
No worries 😄
Yea just turn off the trade set up and it workin fine now
Hello! Why im i getting this error?
It’s a known issue. Refer to the VIP announcements. They’re fixing it 🙏
The plan is to wait today. This happened once before and TV fixed it.
If it's not fixed by the end of the day will go into the code and maybe remove it for a little
Or try and fix
@quick matrix I thnk he's referring to the Trade Set Up feature
Not LUX itself
As the script works, just one feature set
I mean it is giving us the error
could you explain what you mean by that
how I can fix it
Only if you have Trade Set Up ticked
Which is the component that's giving the memory leak
Very simple fix. Go to the Lux settings and turn it off 🙂
thanks
Remove the script, reimport it, enable all your features except for Trade Setup
Nice
it fixed the problem. thanks
Mine started doing that too thanks
Hey - my charts in trading view arent loaded. It states that my memory limit has been exceeded. The solution is to optimize the also, how do I do that?
see #🔊announcements please
@kind cradle #🔊announcements
Yes you can 🙂
hey guys just wondering if i can get alerts on trading view for certain time frames
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
!confirmed
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
@errant wind Those are 2h alerts. Meaning each candle is made every 2 hours. This means for these assets on the 2h frame, the candles ofc close at the same time
So the signals are sent at the same time
hello support
there are no stocks signals today ?
the last one i see is 4 PM yesterday
So Gecko, is there a way for me to give a list of my preferred stocks and see what the buy/sell signals are on 5 min or 60 min charts?
I see the VIp stocks, but those are from yesterday...
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
Hey everyone!
I’m pretty new to forex, so I’m trying to learn as much as I can. I was on the lux algo site reading about divergences, and saw the graph. I understand the graph, but I don’t get the center “going ahead trend” going with trend and going where it shows. Can someone help? I understand what a trend is, but what does it mean on this graph? Thanks!
!overview
Youtube Overview: https://www.youtube.com/watch?v=Z2eahXhp-Xo&t=307s
This is a detailed video that covers the signal terminology and toggle options in our trading system, Lux Algo V2. To purchase: https://luxalgo.com/products/lux-algo
Use the following links to learn more about new features we added as of 7/1/20.
https://luxalgo.com/apps/help-...
covered mid-video here
Awesome! Thank you!
@lost idol #🔊announcements
Ahhhh
you mean just that part
Yeah we will fix it within the next day or so
Our plan is wait - see if TV fix it because last time it fixed itself
And if not - will step in
what’s down?
is there an app for iphone for luxalgo?
Does anyone know what it means when TV says study error memory limit exceeded ?
Thank you I will watch the video 😁
#🤝support message
Any feedback please?
{{exchange}}:{{ticker}}. Type of signal at price = {{close}}.
@vestal sparrow
You can't add a SL in there
does anyone knows why some indicators values in mt4 differs greatly from the one in TD? for instance, I have now 24 value in td for atr, and 18 in mt4
found the one in mt4 to be more precise
not sure why but my mt4 and tradingview values r different
I have a question. Why some green candles are fully green while others are green with red/purple borders? I have seen the different color border on all kind of candles?
Candle body is all that matters
so these are basically all purple candles
without a difference because of the border
correct, those are just all considered purple with Lux
it's just Heikin Ashi candle borders, you could turn them off in the chart settings if you wanted
I have noticed that the LUX also works better with Heikin Ashi instead of regular candles
Heikin Ashi Candles explanation: https://luxalgo.com/apps/help-center#!hc-why-heikin-ashi-1
is there a way to create alerts for a whole list of stocks, or do you need to make them all one by one...?
One by one sadly
hmmm... too bad
Please can you give me correct
Message how i need to modify it?
I woul like to see the following:
EURJPY
Sell or Buy
How can i set it please to see on alert the type of signal its buy or sell signal
@vestal sparrow under condition set it to “lux algo”
You wrote an alert for a price , which is what TV defaults to when you go to add an alert
Is it possible to set a price alert only when the signal changes and is strong for a certain time?
Strong for a certain time? No.
Hey is trading view data delayed. ?
That would require TradingView to monitor the signals & I don’t think there’s a way for that to happen. The alerts are just for when a condition is met. Unless @indigo cradle knows something I don’t
@tropic bluff yes- real time is available for purchase though
What i need to type to message part to see the following if i have a new alert:
Pair
And the type of signal (sell or buy)
Forexample:
Eurjpy
Sell
How do buy that
With this configuration, which timeframe will be used to perform the alerts?
Hello
can anyone tell me how to set up a price alert only when there is a signal change in a 1h or 2h timefreme? if it is possible...
Open up that timeframe chart and then set the alert
it looks like the glitch was fixed. I had other indicators with the same error message and just now they are all working fine.
Is there a referral system?
whats "Cookie days 30 day(s)" ? get free cookies for 30 days?!
It works now 🙂
@tropic bluff I didn’t mean to ghost you. Apologies. Go to TradingView on a desk top and click on the drop down arrow next to your screen name...select account & billing...scroll down to “add extra market data” and you can pick which ones you want
We've said a few times 🙂
It was {{exchange}}:{{ticker}}.Signal you're using = {{close}}.
So if it's a buy alert its: {{exchange}}:{{ticker}}. Buy signal at price = {{close}}.
#🤝support message
?
@vestal sparrow what’s is this?
It's a link to a post
No I mean
What they talking about
Also
Also
Is this correct?
I want notification for only scanners on phone
How I can do
On the website setup
I don’t have the thing saying Mobil push
Are the sell signal notifications on Discord accurate? Or delayed a lot
Are the sell signal notifications on Discord accurate? Or delayed a lot
@sinful cedar they accurate
yep sloth looks fine
Ok thanks
I’ll buy an Apple Watch when I earn back
Then I can get notifications on hand 🤪
My phone get so many notifications form other things
Mail ect
2h30 ago it said STRONG BUY SHOPIFY, could u explain that? Because I am looking at it and it doesnt indicate a strong buy on tradeview?
Our Discord market scanner alerts all use the following:
- Heikin Ashi Candles
- Default Lux Algo (V2.7 inputs & no toggle options enabled)
- Normal trading hours (no extended hours)
- Main exchanges / brokers such as NASDAQ / TVC / OANDA / COINBASE / BINANCE
TradingView alerts are set per your exact settings, timeframe, and enabled toggle options at the time you set the alert.
Adding the Equalizer band makes it require more confirmation to register a signal as "Strong".
@errant wind because a signal is confirmed on candle close. So the candle closed at 4PM, confirming the signal.
Link to our Help Center, many common questions can be answered here: https://luxalgo.com/apps/help-center
Ohh
Ok sorry so it closed at 22 in my time
Also
Is it possible to do an buy now as the market is closed is that recommended?
22:00 your time is 4pm (16:00) NYSE time.
If your broker allows you to purchase after hours I don’t see why not. Also it would depend on your own analysis too. If you use other indicators, do they support it? If they do go for it. If not then hold off.
I personally will, as I’ll swing it into the next session.
Wait, my broker don’t allow to buy after close hour it setting an pending order.
So your saying other broker allow trading that stock after closing hours 😲
Some do, yes. I personally use E*TRADE here in the US & they allow it.
1 Shopify stock, is 1.133.24$
Only shares, can’t do options after hours
One thousand dollar
Also some broker btc have open on weekends dose lux algo scanner makers have open on weekends
I already like this community, really helpfully guys and I have hope doing profits with lux.
Yep. She’s a pricey one
Holy crap I wish I had that capital
Since a few hours I get the study_not_auth error. I refreshed the browser several times / deleted and re-added LUX to the charts, and I'm logged in. Who can help? 😦
@jaunty perch Email support@luxalgo.com 🙂
Qustion
you see the tp1 and tp2
lux recoomedn tp1 and tp2
but the support line red near the price
dose it mean it will bouce back up again and make a new support line??
@indigo cradle can you help me with my extended hours issue?
@quick matrix I'm not too sure - that's tradingview you'd need to ask 🙂
Question: If i connect to an tv compabtle broker like saxo, can i do so my trades goes automated with the signal?
any idea of an email or a phone number that I can contact them? There is nothing on the website
custome alerts from saxo phone app that the strong has apperd?
Question
@indigo cradle
Why isn’t the price the same as tradingview?
Make sure you use the same exchange on TradingView for the data
Can I see everything in real-time data on TradingView? https://luxalgo.com/apps/help-center#!hc-can-i-see-everything-in-real-time-data
Yes
Why?
Becuase you're looking at 2 diffrent things
USDGBP is not GBPUSD
Chart settings -> symbol
Waaaa
Yy
Why
It’s the same thing but just the different way
@indigo cradle What pair should I focus on?
Do you have a list?
“Can you give me an recommendation”
I want 5 pairs to focus on
Trading, but doing trading on group all automated with telegramfxcopier 😂
Ya, I must have began a place
High liquidity pairs
I want to learn
Can you give me 5 recommendations?
GBPUSD
USDGBP
USDCAD
USDAUD
I'm the developer
Ya, but you do trading also
I'm sure there are people in here more experienced with forex than me 😉
ofc we fast 😉
@indigo cradle can you explain to me the "Use HA source" and "Linnear Regression Forecast"?
Always online, u work here
@quick matrix Have you read resources?
And need it clearing up?
Or you haven't seen it?
I am reading them but can't find anything for this two. I found everything else
Most people who don’t want to help unless, you pay them. 😬 a quote I heard
Using HA source used HA data for signals
the link does not say anything about the HA source or I am missing it?
I have a discord question... for some reason my laptop is reading out loud all of the messages posted here...does anyone know how to turn this off??
Using HA source used HA data for signals
@indigo cradle could you please explain that. I have no idea wqhat you are talking about
@quick matrix So if you're on normal candles they have different data to HA candles
So using HA source will use HA data in the calculations
Even though you have normal candles open
@toxic nymph User Settings -> Notifications -> Text to speech -> Never
got it. I did not know what HA stands for. It does make sense now
@spring cave ...thanks so much...it was driving me crazy!!
no problem 🙂
I have a discord question... for some reason my laptop is reading out loud all of the messages posted here...does anyone know how to turn this off??
@toxic nymph Haahhaa lmao
@indigo cradle
I don't think you guys need this code visible 😉
hahahah Boyan some people need proof
Sloth please try not to @ me all the time hahah
Ok I am I demo, testing out lux. On 5 min but the trade keep lossinf when I open a sell on a strong signal

stop trading on the 5 min
You must do TA
you have to verify signal its not hard
TA?
technical analysis
im up over 500 today on lux
It’s demo
so you're not losing money?
Why not 5mjn?
thats good
Why not 5min
i trade on 1 and 2 hour
@errant wind 5m is way harder for new people
And how do you do TA, can somone link me video
Stick with 1h+
Because you need to set it yourself
you can close out whenever you want lol
!resources
Link to our Help Center, many common questions can be answered here: https://luxalgo.com/apps/help-center
Yeah, I just copy that it says and post on MetaTrader
NEW COURSE: https://chartguys.com/courses/entries-exits/
Introduction to Technical Analysis for Beginners
Technical Analysis Basics
Technical Analysis for Beginners
Introduction to Stock Charts
Please Signup for a FREE trial on our website to learn Technical Analysis:
We o...
good watch
@errant wind
It’s possible in discord?
To save like telegram
Ya
Thanks
But also one more question
Like so your saying you guys don’t copy those tp and SL on tv?
Like it’s says recommended 🤷🏽♂️
Link to our Help Center, many common questions can be answered here: https://luxalgo.com/apps/help-center
no wrries
no wrries
no worries
It’s ok. Never be afraid to ask for help, but be willing to help yourself too. Watch the video(s) read up on the resources tab and if things don’t click you can always ask.
Yep most of the things are on the resources 🙂
On the alerts, the any buy and any sell alert you on both strong and not strong signals, correct?
Correct.
Okay, thank you!
@indigo cradle what is the 1st and 2nd options you have as reliable web explorer as today its been crazy, my TV crashed several times a day...
I personally use chrome, it hasn't crashed for me ever
I’ve always used Chrome on my PC and haven’t had any issues
On the alerts, the any buy and any sell alert you on both strong and not strong signals, correct?
@jaunty perch What dose he mean by that?
I use the app a lot too. Only have issues if my signal is poor 😦
@errant wind i meant like does it alert you both on regular and strong signals
If your PC is bad Chrome may not be the best