#🤝support
1 messages · Page 192 of 1
email support@luxalgo.com
that’s just for managing your membership - support team can help you out
Ohkk. Thanks
when i add the lux algo it shows version 1.15 is that normal ?
!update
To update Lux Algo V2, refresh your browser / screen and remove it and add it back to your chart.
Read more here: https://luxalgo.com/apps/help-center#!hc-how-do-i-update-my-scripts
yes
i did the steps and it still shows 1.15
please read carefully ^
in the link
1.15 is just the sensitivity, your script is up to date
thanks alot
Hey @wise jetty you around?
one quick question, I updated the script, now I can see sensitvity to 1.15
Do also need to add Oscillator as well? to update?
(to the chart)
Suggested stop is SL and not TP right? on Lux dashboard
what means volatility?
and I dont have access to Volatility Osiclator
🙏🏾
Hey all, late to the party. If I need to update to v2.4 I need to re purchase again right?
no you don't @gusty nova
all you have to do is delete it off the chart and load it back up
@proven belfry no you don't need to add the oscillator if you don't want. yes, It's SL not TP.
Hey @wise jetty if a Volatility on dashboard is between 30 and 70 we can expect the trend continue right?
Not necessarily continue, it's just a measure of market volatility. It just implies it's a nice trading area
Thanks @indigo cradle
Good morning...is the new volatility indicator out yet...if so I dont see it in invite only scripts....additionally how do I now if i am up to date script wise...It says Lux V2 in the invite only section...
around 1-2 days everyone should have it
TY
I still don’t have 2.4
does it say www.luxalgo.com 1.15
question, the signal are done in the beginning or the end of the candle ?
!confirmed
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
so if i understand, the signal can be raise during candle time but it's only confirmed at close ?
yep!
thanks 🙂
is this the latest version of lux?
I have unadded it and readded it this morning
Everyone will have access within 24/36 hrs
ok super
@indigo cradle @feral lava When did you guys launch Lux Algo?
just a couple months ago! still new
it's been in the works for quite some time though
@feral lava Its peforming like crazy, as long as I hold it up against my own take on the market as well.
Do you see any challenges for when the market goes into less volatile times?
glad to hear, and we actually designed the system so you can recognize when the market is likely entering an indecisive / choppy period and avoid trading it
@feral lava Yeah, but the whole market is very volatile in general than compared to let’s say 6 months ago. When conditions are as back then again (perhaps when the pandemic situations calms down one day), do you still see the Algo have its edge?
it still performs well on intraday timeframes and has a history of good performance overall even before the wild volatility the past few months @mental light 🙂
@feral lava Awesome. Thanks man.
and yes of course we still see Lux having its edge, especially since we strategically designed it to avoid the choppy, non-volatile market situations best we can
no prob!
Wow^ you date Megan fox?!
yes
Nice dude
!cancel
How to cancel membership: https://luxalgo.com/apps/help-center#!hc-what-is-your-cancellation-policy-1
cheers
contact support@luxalgo.com @jaunty perch
Cheers
thanks
Hi, what is the function of the lux oscillator?
!oscillator
Lux Oscillator Documentation: https://luxalgo.com/apps/help-center#!hc-lux-oscillator-tutorial
Hey , can i have a admin to help me out with my subscription?
email support@luxalgo.command you’ll be taken care of 🙂
Email us & we’ll do it for you! no problem
*that you
You’ll receive a notification and can see from your account, just email us and our team will help you out
Thank you my guy👍🏼
no problem!
Are u sure the email is good?
When i send the email it tells me the email doesnt exist
Hi Lux support, when i add the indicator to my chart i get version 1.15, is that correct?
@jaunty perch Yes that 1.15 isn't the version numeber
That the input settnigs
But it's all correct 🙂
@lime dust You'd need to set it up for each stock
ops, ok, thanks 😀
But in our discord channels we alert for lots of 1W stocks
@jaunty perch No worries 🙂
Enjoy the dashboard
tnx
Hey, is there a way i have can have trading view alert me when the algo has a buy signal on a particular ticker??
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
Yep
Is there a video out there on how to do it? Or can you explain??
Perfect thank you boss!
I’m here but doesn’t give me the option to set a alarm on when to sell or buy ?
firstly
You need to have a chart open
And set the algo up on HA candles
And the timeframe you want open
Then go to add alerts
In conditon select Lux algo
The reason you can't see it is because it's not open on any chart
I open the chart and i went premium and everything but in condition it only shows GC1! Which is the stock And vol
make sure you have Lux on the chart and it should appear there as you set the alert
!guide
Quick link to our User setup guide: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Thank you 🙏🏻
is this the one which recently updated?
@rose lance Yep
where do i see the stop loss trailing's?
!dashboard
To learn more about Lux Dashboard: https://luxalgo.com/apps/help-center#!hc-lux-dashboard
cool thanks !
!volatility
To learn more about Lux Volatility: https://luxalgo.com/apps/help-center#!hc-lux-volatility
Hey guys does anyone knows the settings of the twitch charts? I’ve seen the chart is 5s but I was wondering about the sensitivity also
I think it is default
@indigo cradle thanks 👍
I’m getting convinced that the web app is better than the mobile for tv
Hands down
couldnt agree more
does anyone know where i can find your account referral code to invite other people?
thanks
Sign up / login here & it gives you a custom link
hmm not letting me sign in
did you create an account?
You have to sign up
even though i already have a subscription ?
If you didn’t make an account
its separate?
It’s separate from the Lux website
Could we post our referral link on the public chat 😁
Affiliate program
ahh gotcha
Sorry no has to come from your own audience @jaunty perch
hah
i have like 3k twitter followers so we'll see if a screenshot or two can ring in some customers
i respect the hustle tho 😆
👍
appreciated @velvet coral
my pleasure
Do they get a discount or anything from the referral code?
referral program
10$ per every person you sign up.
it rewards you only as of now @jaunty perch and it’s a monthly commission as long as they stay signed up
Ok thank you
Yes, you can read everything on link.
This can really pay for itself 😳
sorry if this is stupid, but why can't I made an alert here? I've tried logging out/in of TradingView, and I've removed/re-added the LUX Algo. It doesn't show up in the drop-down.
I've got all 3 "Indicators by Invite" on the chart
Make sure Lux Algo V2 is on your chart
should say www.luxalgo.com 1.15
at the top left of your chart
then it should work
yeah it's there
when i go to make an alert with only that indicator active: active
seems like it shouoldn't be red though
ohhhh interesting ok i see the problem
email support@luxalgo.com with your TradingView username real quick we’ll fix
LOL, refreshing that page fixed it. So logging out / in to TradingView did not, FYI
which kinda wierds me out, because the problem was still there when I logged back in... obv something is permanent...
You trading btcusd on 1 min timeframe.... good luck
as long as they’re green locks now you’re good, nothing will change
nah I normally do 4h 🙂
No one outside this group can have unless the admins send it to them
@thorn canyon for forex?
nah on btcusd
but a 1m candle makes the alert happen faster so I can see if it's working 🙂
Took this on my demo but I’m glad the 15 minute works
Also I send a buy stop to it thanks to @feral lava dropping that entry article
👌👌
lol TV is messed up a little. Just gave me a STRONG BUY alert on AUDUSD 1HR
i thought it saw it before but apparently it was hours ago
Where can I learn more about lux volatility current?
@feral lava just a question mate - EUR/USD just had a strong buy 2hr chart (discord scanner alert). But I noticed the 2hr candle which the alert has come up on hasn't closed yet? Technically could that Strong Buy get removed up until the candle actually closes?
sorry mate I didn't realise I had changed the sensitivity setting to 1.5 which shows a slightly different result. All good, reset the settings and signal is correct.
👍 no worries def let us know if you see anything faulty
Are there instructions on using the oscillator on the smaller time frames? I have seen comments about using that may work best
!oscillator
Lux Oscillator Documentation: https://luxalgo.com/apps/help-center#!hc-lux-oscillator-tutorial
@weak sage
Anyone else here having the issue of TV telling you that LuxAlgo is a repainting indicator when setting up alerts?
@summer roost yes admins said it was from the dashboard that obivously keeps changing as it follows current price
Ah got it, thank you
Also what happen to the support and resistance lines that was on previous version ?
@sweet flame still theretg^$
there*
must be checked in the settings
What is wrong with support and resistance lines?
Thank you got it is there a way to move the black dashboard
Ok thanks for your help
But I think we want to add it so you can move it around
Hey does the same affiliate link work multiple times? I copy and pasted one I sent to someone else about a week ago
Prolly a stupid question but figured worth asking
Yeah i think your link stays the same forever.
Thanks a lot
yo I gotta question ab cancellation
@indigo cradle
Lol
can someone help me out here? How come it is a strong buy signal yet the suggested stop and trend shows bearish?
OK so dash will not take smaller time frames into account
No worries 🙂
OSC50 is really good for spotting trends
If you set it to length 50 you'll see it's really handy
going to set stops and realized stop would actually be both, take profit and stop lol
yes, I remember seeing your screenshot
is it just me or are the stock scanners not working?
What you mean
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
oh ok thank you
Experts, can you please help me on understanding new volatility chart
!volatility
To learn more about Lux Volatility: https://luxalgo.com/apps/help-center#!hc-lux-volatility
Anything specific not covered in this article though? ^
@jaunty perch cant seem to find your video on using the 3 indicators
The one with the indicators on TV
!mgriff
Trade Smart with Lux Algo by @jaunty perch --> https://www.youtube.com/watch?v=HRr9QcqfQLE&feature=youtu.be
With this strategy you will learn how to take trades correctly and comfortable with any trading pair.
In sure I saw it earlier today
https://youtu.be/4t7rtmfBP7M you mean this video
How to setup Luxalgo system on free Tradingview account
Cant remember ok which chat here on Discord
You have a free TV account correct?
Ok in that video I went over the MACD, DMI/Adx, and the RSI+ indicator. But if you have a free TV account you can only use one of the three I just listed. @weary rune
Ok cool thanks
Sometimes you have to type the full name to get it to show on your account for TV but it’s there
@feral lava how do I see the popup with the suggested stop, etc. that @latent hawk just shared? I haven't seen this before
!dashboard
To learn more about Lux Dashboard: https://luxalgo.com/apps/help-center#!hc-lux-dashboard
Can someone explain how the alert for cmg got triggered? I see a strong buy on the 2 hour sensitivity 1.15 on 7/1 at 830 am
from input settings
okay looking now thanks
Can someone help me understand the difference between the alerts on TV and the alerts in #695668653869236433? Example:
11:30am
No difference, just on original settings and using NASDAQ exchange
CMG 2h chart, shows signal at 8am
we don’t use extended hours
Might be a rookie question, but what's the differences between Buy vs. Strong Buy and Sell vs. Strong Sell
!terminology
Lux Algo V2 Signal Terminology: https://luxalgo.com/apps/help-center#!hc-signal-terminology-1
Hi guys are there any additional changes to inputs or the oscillator or volatility indicator when scalping the 5 min TF?
can be smart to increase length of oscillator
Ok. To what length ?
up to you, but around 40-50 is generally good
Hi @feral lava I tried to message you directly, is the best way to go if I have some questions and wanting to ask someone direct? Or is there someone else in particular? Thank you.
If you have questions you can ask here 🙂
Or if it's private email support@luxalgo.com
Ok thanks, I will send an email 🙂
Anyone know how to get extended hours on trading view?
Or do you have to be a pro member?
Thanks! Does lux algo not work during extended? (Pre and post markets )
I love us30 but ima say this to everyone here. DOnt trade a pair that is going to blow your account. If you all want to risk all your money then that is where the Vegas casinos comes into play. This is a skill market yes that pays you well but you must follow the rules to stay in profit consistently and become successful in this industry. Nothing but respect to many of you in here doing your best to trade correctly. Keep the grind going and many of you will reach to the top one day.
So if you are fairly new to day trading, where can one pick-up the basics
Study before you trade live
Understand the market before hopping into any trade
Be consistently learning about the market and how it moves and as long find your own strategy just because one out of two strategy works for this person but may have a different learning curve.
yea I mean I learned on an academy and always went to forex factory to see what is happening with the news and what not
Before placing
You went to baby pips?
@jaunty perch when using your scalping setup, do you scan through the pairs in the 15m timeframe in search of a good set up? Do you enter at 15m or 5m?
I have my own pairs set up for the 15 minute chart. When I scalp the market it’s only for a short time because the market does reverse on his own sometimes. I enter on the 15 minute frame and let it run
Got it
Had a 10% gain this afternoon over an hour's worth of scalping the 5 min.
For this forex signal GBPCAD when I look it only shows me a normal sell now a strong sell? And the bot says strong sell?
You got a screenshot?
The bot just sent it
In discord?
Also
Maybe address this because when you use
FXCM of GBPCAD you'll see a signal but when you use OANDA version of GBPCAD you wont see a signal
Yeah they have varying data between platforms
Yep we used FXCM
Alright thank you sir
Mine seem to be out also
Strong sell @ 16.00 , but I didn't get bot signal until 12.00?
!confirmed
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
!confirmed
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
placed my trade 17 minutes ago
after it closed, and now i look back and its not there
im 110% certain it was a strong sell
it was confirmed
my TV alerts only confirm on close of bar
so the strong signal was the LAST hourly candle then right? because that's the only time it will be confirmed and not change - when the candle closes
A signal can appear during the life of a candle and then dissapear before candle close
because it’s only confirmed on close
no it appeared, closed a strong sell at 9
it shouldn’t have changed, signals do not repaint
and then about 10 min ago it was removed
what instrument
You might’ve changed tickers
no i have alerts for USDCAD and all of them
i have the alert still on my Log
1H Strong sell july 6 21:00:00
Yea man shouldn’t have disappeared, that’s impossible for our system to do
ook good
you might’ve went to a different ticker / different exchange
nevermind then it must be TV on my end
are you using candles or heikin ashi?
as long as someone else sees it and im not crazy
everything is normal its just TV being dump
i'll restart everything
👍
thanks pierre i knew i wasnt seeing things
all good
unfortunately i got stopped out of my SELL anyways so meh
yeah it was TV @feral lava im seeing the 1HR sell again
my bad
all@good
@velvet coral just zoom out a little on the chart before entering the signals. You can see price has bounced from this area a lot of times. So either wait for a pullback before going short if you did want to follow the signal - or just wait for a strong breakout of the low.
yeah i was expecting i t to fall down a little more, wasnt looking for a huge move with the RSI sort of oversold already
just was the first STRONG signal in a few hours and went off impulse with a semi decent looking setup
lesson learned
So by changing my time frame to 1H lux will send me signals every hour?
^ not even close. You need to learn what the time frames mean. Go into YouTube, plenty of videos in trading. Etc.
I thought it was doing that at first but I see it now thank you
hey guys how can i change divergance color from gray to another?
Gray candles color? Should be within Style settings from the cog wheel on script in top left
Does lux algo cost monthly?
Yes
I mean isn’t that how you got it?
i was wondering if it was monthly paying for staying vip not use the script
yes it’s monthly we only sell subscriptions
if you cancel
oh ok
LUX - this might be a dumb idea but is there a way to put the float rotation on the dashboard?
awesome!
I'm trying to update the script but it shows 1.15 n/a n/a. Please assist
That's it bro your good to go
Ok cool
!update
To update Lux Algo V2, refresh your browser / screen and remove it and add it back to your chart.
Read more here: https://luxalgo.com/apps/help-center#!hc-how-do-i-update-my-scripts
if i cancle my subscriot pre maturally
you'll keep it until your month runs out
Hello,
Lux Volatility is not always available ?
Should be in your Invite-Only scripts!
I do not have it
What’s your TradingView username?
Ptitben999
Says you have access - try refreshing
Hey, I just got an email saying that I could add the lux algo, but it hasn’t popped up under invite only yet and I’ve tried refreshing
we emailed you back
send screenshot of your profile settings to support and we'll make sure you have access
Just did thank you
Fixed! you sent us the wrong user @ checkout but you should be all set now @wet kelp 👍
Perfect thanks
does heiken ashi candle takes same amount of time as regular candle cuz i am watching 3 minutes on NQ HK candle and it is at the same candle for the past 7 minutes
Heikin Ashi Candles explanation: https://luxalgo.com/apps/help-center#!hc-why-heikin-ashi-1
!data
Can I see everything in real-time data on TradingView? https://luxalgo.com/apps/help-center#!hc-can-i-see-everything-in-real-time-data
well market may be closed
@feral lava is EURAUD a strong buy on your chart? It was signaled a STRONG buy but im only seeing BUY
Same ^^
I just entered and noticed it wasnt right :/
I did also
1 HR is STRONG so maybe ok
I won’t took that but it’s about to sell soon
Yeah i kinda got screwed a bit
No big. I need to just go off my own 1HR alerts on TV
Can someone tell me what conditions I need to set in TradingView so that it alerts me when a STRONG BUY or a STRONG SELL is triggered?
Never mind, I think I just answered my own question.
Condition: www.luxalgo.com, Strong Buy, Once per bar close
i prefer "alert any"
I’m assuming alert any does just that? Sends An alert anytime buy, sell, strong buy, strong sell is triggered?
someone can explain or give the link for the sentitivity setting ?
Just keep it the same
Quick question guys
in terms of trading with either LIMIT or STOP orders
when a STRONG BUY is indicated, which type should I consider, and why?
Limit is just creating an order at a certain price, a stop is creating a stop loss at another price. You should set both of these for every trade. @jaunty perch
Thats on the daily tf
@trim trench it’s basing it off the candlestick, with HA candles when it smoothes the data. The candlebar is off a little bit.
when you have HA, you'll see the actual price in red. The price you see when HA is selected is the average price smoothed, as @wise jetty said
Yep, you can see the price of the candlestick in the purple 😃
single?
I think he means signal
ah :)
You have to have a basic knowledge of trading before just blindly following the signals. So I'd say you're new and have no experience.
in fact, I wouldn't even say basic... rather, advanced knowledge.
typical reaction. better blame everyone else before working on the own weaknesses
Worked for me lol
Also need to find right things to trade using LUX.
Another +16 pips on GBP/USD short just closed. 3/3 winners today for 43 pips.
obviously not
Does anyone have any good YouTube links of people using lux? It’s still kind of confusing to me, granted I haven’t looked at it too much because I feel like I trust my gut more than the algo. But I do want to use it more
^
It has worked for me 🤷♂️
Don't take the signals blindly.... they're not meant to be taken blindly.
it just alerts to a change in sentiment.
I use it as confirmation of my suspicions or to stay in a trade longer when I used to get out sooner
if it shows a signal short, look out for possible short trades.
don't just take a short.
Oof ok bill
Message support
I have a slight suspicion that you've been following signals blindly
Ok bill is in a cool down 😂😂
👌
Can't turn water to wine 😔
some ppl lack a lot of things. manners, grammatical knowledge, braincells 😂
This is the VERY BASIC of the markets for those who would like some insight.
this was off the GBP/USD 📉 SELL Signal (2H Chart) call by the bot
you wouldn't blindly take the short when price has just made new lows into previous highs.
you can if you want to gamble that it's going to breakout, which sometimes it could. EURUSD did the other day... I didn't have a chance to get in and it just broke out the way of the bots call 50+ pips.
unless you want huge drawdown, you will lose most of the time doing that though.
@thick laurel most people start in one arm bandit mode 🙂
Praying to the forex gods
Find the signal, open the chart and do your own technical analysis. If you don't know how then you have more learning to do
they don't exist @earnest mica 😉
Only the bankers... @thick laurel
if you have two charts layout with two different symbols how do you change settings for symbol or candle type in one of them cuz i see only one chart offers it but not the other one
This is my alert I created, but for some reason none of my alerts trigger even though there's been multiple buy signals on the chart
Am I missing something?
Ahhh no wonder! So I would do that individually for every stock right
Yep 🙂
My friend wants to get Lux and he’s asking if there’s any promo codes
@jaunty perch Sadly not at the moment 😦
But we look forward to him joining 😉
He can use your referal code?
Ok thanks
And you'll get $10 a month
He is
ahhh gotcha
😋😋😋😋
Hello - so i just noticed something.. someone posted SPY's chart today in the ministerial channel and it had a strong sell signal where mine only has sell. 5 min chart, HA candles and 1.15
it seems they had the same settings as well
*testimonial lol
hmm even if i use regular candles then it still shows sell
With candle optimisation on?
yeah
I have an error on mt4.. "common error" when placing trades Can someone know how to fix this? Thanks
!alerts
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
Where to see the alerts from vip page?
!scanners
Everything you need to know about our Automated Market Scanners in Discord: https://luxalgo.com/apps/help-center#!hc-automated-market-scanners
guys... i configured alerts in trading view for 1 hr of LUV.. i just got a buy alert to my email, and i dont see buy signal for LUV 1hr chart....
is there anything i am missing
you may have changed your settings after you set the alert
alerts are per the settings you had when you set them up
contact support@luxalgo.com
@indigo cradle ^
today was good . i wasnt expecting to make money on my first day
made 4k on tsla puts
🔥🔥
4k today?
ya
@indigo cradle nice ty
wait so
the only way to check strong buys is on my own
right
so i have to find the tickers on my own
How do you do options using the lux bot
We have the discord scanners ofc
Um
You just open an options chart and trade how you'd normally do it
I am sorry but I am not able to see the options chart
I just add the stock and open it
Quick link to our User setup guide: https://luxalgo.com/apps/help-center#!hc-user-setup-guide
Have you followed the guide?
I am using mobile app
We have a full guide on our website
why does the live bot scanner sends signals so late in discord?
It doesn't 🙂 It sends on candle close
so is it too late to enter?
When is a signal confirmed? https://luxalgo.com/apps/help-center#!hc-when-is-a-signal-confirmed-1
I did see the website but no info on options chart
Yes
Yes
Yes
Assets as in?
No
with $2,000
👀
Same here what to trade with 2000
I was thinking $100 each?
amount you should trade with doesn't matter. it's the amount you should lose that you're worried about
For a first timer
I think better to push a grand in one stock
you can trade with $2000, if you're only willing to lose $10, it doesn't matter. if you use $2000 or $200. $10 is $10
just depends on stop loss right?
but, for your first trade. use a small amount, get used to it. get used to trading. maybe use $50 per trade until you get the hang of things 😄
definitely,
okay perfect
thanks guys
btw codes
once i place a limit order right, and it goes through, as in it triggers
can i set a STOP loss option straight away?
correct.
or does it need to be fulfilled first?
okay perfect perfect
i would do a small trade until you get the hang of stop loss though. 😄
that way if you make a mistake it's only a small loss until you can use the stop loss properly
yep perfect
I keep stop loss at 7%
7% is very aggressive. 😄
stop can depend on market structure
if you're trading from an area of value such as a trend line you would set stop just outside trendline
I mean I take 7% loss
Some are kept for long terms
Dividend stocks so I don't see stop loss for those
Is there any formal@training on how to use this algo as it isnt as accurate as the live stream
raise the sensitivity and it'll be more accurate.
Which algo?
less profit, more accuracy.
Does strategy tester work with this algo
Nope we don't offer backtesting
Because it implies you should follow signals blindly
Which you should not
We also have a full tutorial on the website
!mgriff
Trade Smart with Lux Algo by @jaunty perch --> https://www.youtube.com/watch?v=HRr9QcqfQLE&feature=youtu.be
With this strategy you will learn how to take trades correctly and comfortable with any trading pair.
How can I customize Trading View, to alert me, the buy and sell signals in the Lux Algo that I customize.
How to set up alerts in TradingView: https://luxalgo.com/apps/help-center#!hc-how-do-i-set-up-alerts-on-tradingview-1
Thank you
LUX - I am studying up on the dashboard. If I may ask; if I'm looking to get in a trade and the current price of a stock is (lets say as an example) $1.54 but the stop loss is higher than the current price, lets say $1.58, how should I interpret this? Would that be a sign to wait for the price to reach above $1.58 to enter a position?
is there anyone here that started with a small acc and made it big
takes a long time to make it big unless you're taking stupid risks.
@waxen dawn if the SL is higher the algo would be suggesting a short
I was just watching a video about trading... you know what he said? This is not a GET RICH QUICK business.
You have to spend years studying to perfect your trade. you can't do any profession in the world with very little experience. you have to work hard at it to perfect it and be successful.
if it were an easy job. we'd all be billionaires driving lambo's and sipping cocktails on a beach. 😄
^
The following is the list of assets our Discord Market Scanners cover.
Timeframes include: 2H, 4H, 1D, 1W on each asset with standard Lux Algo V2 settings (no toggles enabled).
STOCKS:
FB, AMZN, AAPL, NFLX, GOOGL, TSLA, BA, DAL, AAL, LUV, UAL, ROKU, AMD, NVDA, CMG, SHOP, RCL, CCL, NCLH, SQ, ZM, MA, V, SPCE, SNAP
FOREX:
GBP/USD, EUR/USD, USD/JPY, USD/CHF, AUD/USD,
USD/CAD, NZD/USD GBP/CAD, GBP/JPY, GBP/CHF,
EUR/GBP, EUR/JPY, EUR/AUD, AUD/CAD, AUD/JPY, AUD/CHF
CRYPTO:
BTC/USD, ETH/USD, XRP/USD, BCH/USD, LTC/USD, BNB/USD, EOS/USD, XTZ/USD, LINK/USD
INDEX:
SPX, DJI, IXIC, E100, CAC40, DAX
COMMODITIES:
XAUUSD, XAGUSD, XPTUSD, USOIL, SUGARUSD, ZR1!, ZW1!
everything with their timeframes we have on alerts. ^^
Codes what do u use to trade ?
How reliable is the alerts that I see in #695668653869236433
They are alerts.. reliability is based on your own TA and research
I'm personally a crypto trader. Alerts are used for confirmation. you can't take every signal blindly
Do u recommendation crypto
But the success ratio is good rite?
*recommend
The signals are almost correct
cus it’s 24/7 and I like that
For the most I saw
They are correct when you do your own analysis
we don't do back testing. but, my personal test came out to about 50% if you took every single trade alert. i did it over 100 alerts on a single asset.
Cool
does that mean it'll work 50% of the time? nope.
paired with your own TA, you might have a 70% success rate. or you might have a 40%. it all depends on how good of a trader you are. how you handle your emotions
@errant sentinel yes it's 24/7. but, big moves don't happen all the time
they happen the same as every other market. When people are online trading.
Is there a way to trade with options using lux?
Ok do u recommend bitcoin rn ?
bitcoin is pretty stable right now, hard to predict which way it's going. hard to get profits.
i believe it's altseason right now, tbh
a lot of coins are up a couple hundred % in the past few months
I’m gonna wait till bitcoin goes down a lil bit
Is there anyway to set alerts on a watchlist rather than individual stocks?
has to be per ticker, can’t just be all stocks but we are looking into this now
@feral lava setting one custom LUX alert (ie. signal on a 30min chart) to apply to everything in your own TV watchlist would be extremely streamlined. Not sure if possible though?
yea we’re actively looking into this, it’s only TradingView that would limit us here
yeah thought so, I'd imagine something additional would have to be programmed to do it as tv doesn't have this feature to have an alert span across multiple instruments. I'm sure you'll update us in due time if/when it can be done 🙂 Thanks.
would be nice if dashboard can be moved to a corner instead of on the candle
we're looking into this - was recommended in #🔍feature-requests
if you turn off auto on your chart it appears at the 0 line
bottom right yea
dont see mto work
dashboard should appear at $0
hmph works for me
z-+
if you use candlesticks instead of HA
@thick laurel do u use candles or HA?
Oh ok. I use HA.
Mostly HA default settings. I barely use the indicator to determine entry price though. I literally use the signals as an alert to be aware of a trade could come up.
So it doesn't matter to me if its HA or candles, because I switch to MT4 and do my own technicals
clearly thinking that is a general setting and not linked to Candles because for me HA mostly equals to a candle
HA is a smoothed out average of price
on TV you can see the actual price, it's in red on the right hand side versus the current HA price
@thick laurel thanks for the explanation about HA. I use trading view for my analysis ( I am a mac OS user ), so need to have the better TV settings ^^
but it's why my signals are different from the alert channels 😁
just for reference so you don't take a signal thinking you're entering where the price is showing on a HA chart.
for instance if you took a trade right now on the US500, it would enter where I've marked - not where the price is showing on the chart (HA chart)
I found a setting that can hide the HA price and show the current one
ah ok
I share the screen in 5 minutes, time to open my PC
I found it this morning, is why I ask the question about the candle optimization ^^
found it - under chart settings 'show real price' is what you're referring to?
🙂 its ok
I can’t setup lux alert any suggestions?
it’s on condition
And how can I get lux oscillator
Would like to know what the gray candles (optional) indicate in Lux?
hello, literally join a couple of hours ago. Is there a way to push notifications to my phone for the indices & forex bot scanner on suggestions of trades ?
I think you can download discord for mobile which should have push notifications
i'll download the app and have a look
personally what do people find best work intraday trading or scalping, swing
personal preference on how you trade. If you're basing your trades off the 4hr chart, then you would most likely have wider stops and trading longer term than if you were scalping on the 30min or 15min
very true, all my work is based normally on a 4hr close but hoping this would help getting the best entry
long term, short term, intraday - they all work, it's up to the trader to make it work. The signal just provides insight as to what could happen, you have to determine when you want to enter the trade after you receive the signal.
I find personally you'll get a lot of draw down if you just blindly enter the signal as soon as it comes up. But if you wait, look for an appropriate entry and take that, then you will have a lot more success.
quick question guys
when settings a stop loss
whats a good margin for room to leave?
5% 10% 20%?
It really depends
If you’re scalping you want to be in and out of the market quickly with a tight stop loss
Im trading on 2H 4H charts
with strong buy indicators
What do you think is suitable
every single instrument is going to be different. You wouldn't use a 5 pip stop on GBPJPY because it will take that out in a blink of an eye.
I just cancelled my subscription can you refund me the charge that went through today,
can i message you pierre?
yeah
anyone?
@verbal cairn Email support 🙂
What’s the address
can anyone explain the sensitivity part on the input tap
!settings
More info on changing the input settings on Lux Algo V2: https://luxalgo.com/apps/help-center#!hc-should-i-change-the-input-settings
The lower the sensitivity the more signals
anyone know if you can change trading view prices to aud, eur etc
@indigo cradle yesterday a friends signed up with my affiliate link. But on the affiliate website there is no sign of me getting the 10$. Do you know when it should show up ?
We pay out on a specific date 🙂
I'm not 100% sure of that date
But everyone gets paid then
Ok :). I am not worried about not getting payed with your great Team and support 😊
@indigo cradle I contacted support and they said I cannot get a refund, that’s ridiculous I didn’t even use what I was charged for! Something has got to be done about this
I have nothing to do with that process I'm afraid
I know it's a policy
Since it's hard to do
So what you’re telling me is now that I’ve cancelled I don’t get access to it for this month even tho I paid for it and I cannot get a refund
@indigo cradle
Ok
Pretty sure every single subscription service runs the same model. If you cancel anytime during the month, your subscription won't be renewed and you will just complete your current month of subscription
If you cancel your netflix account they're not going to refund you lol, you just get to finish your current month and won
won't be renewed
Yeah otherwise it gets confusing
im only getting a SELL signal on the 2HR AUD/JPY chart @indigo cradle
Same
Is there any way I can get the lux scripts? I understand they are embedded in tradingview but I’m writing custom code outside of tradingview.
prob not they wouldnt want you stealing their IP
not saying you would but
you're Bobby Axelrod i wouldnt trust yo ass

😂 😂
Thx but if u design it right the base code resides in their servers
You have access to the output values of the scripts currently
No it won’t work for what I want to do
We can't really hand over the code
Not asking for code - more or less an API
im done now
Hahaha
ahhahahahhaha
fckin love that show lol
Well it's all built into TV
I’m doing it for Taylor
If u built an api I can do some really cool things
TV is killing me slows the entire process down
If I worked for TV 100%
When u build API’s in your architecture the community can build around Lux and make it more powerful
But I get it thx
@indigo cradle Hey how can I set a TV alert for when the volatility indicator reaches over a certain value? Im new to trading view but loving the algo so far 🙂
figured it out all good now
About to do that right now
yea i figured when thats above 75 it gives me a heads up for a possible entry
Above the .40 line that’s when momentum put up
setting mine for 0.7490
like to catch those bot plays when the stoch is below 25 and the Volatility is above 75
What does the sensitivity do on lux algo?
!settings
More info on changing the input settings on Lux Algo V2: https://luxalgo.com/apps/help-center#!hc-should-i-change-the-input-settings
The short price?
Right thatd make sense
Oh well I've set mine to show the real price
I like the stop but was hoping it'd be a recommended take profit
i prefer binance. cheaper fees
How do I turn on the equalizer band? Tried to find it in setting but can't
go to lux algo settings
i think you should delete the algo indicator and add it again
Got it, thanks
If we signed up with a discount code, will that discount apply every month?
@golden flower have we ever done a discount code?
If you mean so signed up before our price raise, yes, it stays at 47
👀👀
I signed up with a discount code a few months back, realizing now the discount hasn’t been applying to future months. I can dm if more info is needed
got it
Can you use LuxAlgo with the Pine editor in TV and test strategies?
TV backtest?
Not currently for a few reasons:
- backtesting on TV is notorious for being totally useless among professionals since it's normally not a good representation
- if we release a backtest that returns positive results noobies will assume they can follow it blindly
- TV doesn't allow for HA candle backtesting
1): Can you expand?
2): I don't want you to release backtest results - I'd like to run my own tests on strategies with input from the algo. I won't release my strategies publicly, it's to refine my own strategies using Lux.
3): They do actually allow it: https://www.tradingview.com/pine-script-docs/en/v4/essential/Strategies.html. An you can set Algo to run candle-sticks, right?
Recently gained access to my Lix indicator, however I am very new to TV. I am interested in day and swing trading primarily and I have a mock up account I have $1500 set aside and I have now spread that portfolio across a few interesting stocks for the week I can see moving to the up side. Now my question is what sense settings and overall settings and alerts should I apply with lux in order to get the fastest response for my desired day trades with an alert attached
Lux*
@raw walrus I think the safest bet is if you're new to learn to identify areas of support and resistance, and take the signals from there. See my latest posts in #696781587223937025 as an example.
otherwise, I hear a few people using a thousand indicators to line up which seems to be working? I prefer pure price action. Whatever works for you.
Yes I would like to learn this. But with that being the case should I leave the lux settings at base 1.15? Or? And I would prefer an indicator chart of stock volume instead of the direct number on the dashboard option cause the dashboard takes up much wanted space and doesn’t seem clean when I apply it
I believe the standard defaults for LUX have been working good. I'm not sure about the volume, as I trade currencies for the most part and don't require a traditional volume indicator as you would for stocks. Someone else may be able to answer that.
Ty
@feral lava is it possible to change the OCS number on dashboard?
i want it to be 11
@indigo cradle ^ question 4 u
Nahh lol
well we like 50 as default
but if it’s possible to change it to whatever you want from 50 within the settings that’d be cool
Absolutely possible
Super super easy to add
But surely you could just use the oscillator no?
hahahaha appreciate it manuel 🙂
Just doesn't fit some people's style / if they are new to tradnig
Which is totally fine
It seems great so far, only thing that worries me is who knows whether it will go offline in the future
Nooooo don't worry about that
seems decently established so im not THAT worried, but its always on my mind if not owning the script
but I understand not owning it
Yeah don't worry 🙂 As long as we have 1 person active it'll be running 😄
How does the referall program work?
So for each person you refer you get $10 a month from
You just give us your paypal
And you can bind it to your lux account
So let's say you have 10 friends using your link, it's $100 a month 🙂
@indigo cradle Any comments on my last question?
How do you suggest that you gain access to script outputs without having the code?
Also you can backtest normal candles but not HA sadly
I get you want to make a strategy using Lux but for that you'd need total script access and TV doesn't support output script vals
