Printing on ender 3 V3 SE. I keep having problems with my ABS prints having having horizontal lines. I have tried various things but can't seem to find the cause of the lines.
#Help Dialing in ABS
viral stream
Here is my cura profile
PK ! ¤„щ/Н Н creality_ender3_abs_#2[general]
version = 4
name = ABS Std
definition = creality_base
[metadata]
type = quality_changes
quality_type = standard
setting_version = 22
[values]
adhesion_type = raft
layer_height = 0.18
layer_height_0 = 0.25
magic_spiralize = False
material_bed_temperature = 100
material_bed_temperature_layer_0 = 100
smooth_spiralized_contours = False
support_enable = False
support_structure = normal
PK ! 5дк§К К " creality_base_extruder_0_#2_abs_#2[general]
version = 4
name = ABS Std
definition = creality_base
[metadata]
type = quality_changes
quality_type = standard
intent_category = default
position = 0
setting_version = 22
[values]
cool_fan_speed = 5
infill_pattern = gyroid
infill_sparse_density = 20
initial_layer_line_width_factor = 120
material_flow = 100
material_initial_print_temperature = =material_print_temperature
material_print_temperature = 235
raft_interface_layers = 1
raft_margin = 1.5
retraction_amount = 1
retraction_extrusion_window = 1
retraction_speed = 10
roofing_layer_count = 1
speed_layer_0 = 15
speed_print = 45
support_tree_angle = 30
zig_zaggify_infill = True
PK ! ¤„щ/Н Н А creality_ender3_abs_#2PK ! 5дк§К К " АЅ creality_base_extruder_0_#2_abs_#2PK Ф Л
wooden yarrow
.25 layerheight might be the issue
Most printers min movement is .04 mm
And if you get an uneven number the slicer "guesses"
Otherwise a classic would be z binding
viral stream
I tried a .2 layerheight and have the same issue. What would be the best way to fix a duel z axis or properly calibrate it.
wooden yarrow
Oh wait you print abs on an open frame ptfe lined hotend printer?
viral stream
I do