Elegoo Neptune 3 pro not working properly | 3DMeltdown 3D Printing | Page 1

sullen hound Nov 13, 2023, 6:53 PM

#

@bronze peak id say dirt on the bed. Then z offset if thats not it check if the extruder is tensioed correctly

sullen hound Nov 13, 2023, 7:09 PM

#

That the amount of extra distance (or removal of it ) between your nozzle and the printbed.

#

Since auto bed level does not set the z offset

#

You might did it during the setup process with a piece of paper but thats only somewhat reliable

#

@bronze peak

#

You should be able to adjust during a print via your printers menue. @bronze peak thats the option i always go for because its under real world condition

#

A qidi x plus 3 a mk3s prua and i think i had 12 or 15 others pre corona

#

There is no the one distance @bronze peak

#

I varys depending on printer bed type temperatures etc

sullen hound Nov 13, 2023, 8:06 PM

#

@bronze peak again there is no "the value" youll have to test on your own 🙂

#

!leveling

#

!level

wide daggerBOT Nov 13, 2023, 8:07 PM

#

https://i.imgur.com/tbvOlB9.jpg

Imgur

I've made an infographic-style guide to leveling a 3D printer's bed. I see a lot of folk struggle with this every day here and on the discord, so I thought I'd collate a bunch of info into a handy guide. Let me know if anything seems amiss! ✨?✨

sullen hound Nov 13, 2023, 8:07 PM

#

Ignore that its about leveling but the images show when the z offset is good

#Elegoo Neptune 3 pro not working properly