soft agate
Someone told me to print using this G code for line purge. Nozzle path seems to be in the right direction but theres no filament coming out. The reason I changed my G code to do a line purge was because PETG+ was oozing a little string of filament out, sticking to the nozzle and the print when going to printer origin. Before the problem was too much filament coming out, right now my problem is no filament coming out. Is this because of the G code?
willow valley
try setting the F to 1500
E9 F1500.0
E12.5 F1500.0
but other than that it should make a purge line
willow valley
this is what i use
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X30.1 Y50 Z0.28 F5000.0 ;Move to start position
G1 X30.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X30.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X30.4 Y50 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up