extremely rough print | 3DMeltdown 3D Printing | Page 1

halcyon kelp May 24, 2023, 9:51 AM

#

I had changed it out to a larger nozzle to hopefully get faster print times

#

I'm using an ender 3 Max neo

mint radish May 24, 2023, 10:06 AM

#

got an image?

halcyon kelp May 24, 2023, 10:15 AM

#

mint radish May 24, 2023, 10:19 AM

#

that looks like different problem to me. what are your print settings ? speed layerheight temperature and material

halcyon kelp May 24, 2023, 10:34 AM

#

mint radish May 24, 2023, 10:49 AM

#

you changed to a .6 nozzle i guess ?

#

@halcyon kelp

halcyon kelp May 24, 2023, 10:54 AM

#

The nozzle that I change it to is 0.8

mint radish May 24, 2023, 10:55 AM

#

Okay so i know your issue but you wont like it 😄

#

With your settings the hotend would need to heat above 20mm³/s

#

Depending on which hotend you have from creality they can max to ~ 10

#

Even 30 mm/s is already at 12mm³/s

#

You would have to slow down to 23mm/s print speed

#

.4 mm at 35mm/s should work but also needs more then 200c

halcyon kelp May 24, 2023, 11:14 AM

#

When you say the hot end would need to be heated above 20 mm what exactly does that mean

mint radish May 24, 2023, 11:23 AM

#

You missed the ³/s part

#

That means it would need to melt 20 cubic milimeters of filament per second

#

Or toughly 1cm of 1.75mm filament per second

halcyon kelp May 24, 2023, 11:26 AM

#

Thank you I'll try it now I greatly appreciate it

#extremely rough print