marble ibex
Ive had an unreasonably hard time tuning PETG, could anybody explain why my prints might be looking like this? I have a profile that ive downloaded and its a starting point but im not sure what this is and how to tune it, flow maybe?
Printer: Bambu labs P1P
Slicer: orca slicer (archane enabled)
Filament: Overture Blue PETG
Bed Temp: 80
Nozzle temp: 265
Flow: 1
Pressure advance: 0.036
Max flow rate was 15 but i lowered it due to this issue. Thought it might help, it hasnt lmao.
cyan hare
attach the gcode please
marble ibex
Dont know how to do that, i can assume how but ill have to try when im off work. Really i just need to know what that would be called, is it poor layer adhesion, bad flow, pressure advance, im not sure. If i can find out what the artifact is i can just google it but i cant figure it out.
marble ibex
attach the gcode please
Added some more info of the slicer settings. Its not all of them of course but maybe some of this info my help you help me. Ill look into attaching the g code after work, do you mean copying and pasting the starting and end g code? Or do you want me to export the profile for you to download and look at
cyan hare
neither. I want you to attach the entire gcode file
marble ibex
Oh! I think ive seen a selection for export g code, ill take a look when I’m off, Should be around an hour and then ill update the post here
marble ibex
now, sorry if my dumbass has trouble understanding this my brain is fried, but Machine start G-code:
bleh, not even gonna bother. got a feeling im going the wrong direction here. i dont think there is any way to get g-code out without saving a .3mf
wait.. XD hold on
i suppose with bambu there has to be a file to export, such as, the orca cube. BBL is tight
cyan hare
this isn't the gcode from the photos
cyan hare
I don't want you to reslice an object and send me the gcode. I want to see the gcode that produced the above photos
marble ibex
jesus im sorry man
it took me way to long to realize
adjusted the slicer settings to how it was for that print too
cyan hare
allegedly
cyan hare
why are you printing so hot?
marble ibex
slicer profile was 255, i increased it to 265 off a whim cause i was having trouble at 255 with green polymaker petg
green polymaker i had to increase to 275, im currently running through orca calibration with the green itself. i dont wanna be helpless when it comes to tuning but its been tough learning it
one thing i have yet to try, in which im doing with the green for this cali process is, ive been keeping my petg in a sovol dryer next to the printer, im inclined to believe my issues arise from that with other things comboing it. for the green rn, and for the blue later, i have the spool on the mount of the printer
cyan hare
I think you should do a "temperature tower" to figure out the optimal temperature.