3D Printer Model: Ender 6
Slicer: Cura
Hardware Setup: Klipper/DGUS reloaded klipper screen
Problem description: When pressing the probe button the printer doesn’t do anything. How ever besides this problem the rest of the screen appears to be functioning correctly.
What I tried: I read back through the guide on the site and verified that I did everything correctly. the only thing that I am not sure of is when I compiled the .bin file under the screen serial port (USART3) there where two different options that where both USART3 so I opted for the first one.
#Ender 6, Klipper, DGUS reloaded klipper screen(solved)
naive cosmos
naive cosmos
I did finally figure it out. This is the config settings that I used to make it work. I had to do a manual G28 and bed_mesh_calibration, Afterwards that probe button the screen never failed me again (so far). I have come to the realization that a PI 4 or one of the main like PIs is a better option than the Pi Zero W that most recommend. While it does work and do mostly what you want. It doesn't have the extra usb ports for a camera but does have a connecter but they limit what type of camera you can use.