Under extrusion infill only | 3DMeltdown 3D Printing | Page 1

real bobcat Sep 28, 2022, 7:42 PM

#

Hi !

I'm having trouble with under extrusion for the infill only. The outside wall looks great.

I'm using Cura and a sidewinder X2.

I think it comes from a setting in Cura but I don't really know where to start. Retraction maybe ? It's at 2mm and 25mm/s now. Should I add distance or reduce it ?

Thank you for your help 🙂

clear trellis Sep 28, 2022, 8:12 PM

#

do you have some pics for us

real bobcat Sep 28, 2022, 8:30 PM

#

rn_image_picker_lib_temp_13b6b957-661e-41a0-922f-7ff8e3685462.jpg

tulip relic Sep 30, 2022, 4:50 AM

#

stock extruder?

#

top looks like it has some degree of underextrusion too

#

try increasing hotend temperature

#

calibrate e-steps and flow

#

try drastically lowering infill print speed. if it's the only thing that helps - your extruder motor needs more power

#

like, in mA in config

#Under extrusion infill only