fdm-support
pla+ peeling up early in the print, too sticky it seems and grabs the extruder?
Ringing tower failing at the same exact spot
big difference in PLA print quality when sliced with Cura or Superslicer
Unsure
Z axis/auto leveling (?) issue (Anycubic Vyper)
Underextrusion (at least I think that's what it is) on one side of prints
Anycubic Kobra Max
issue randomly pops up then goes away.
benchy has blobs on hull and bad top layers
Underextruded sparse infill?
first layer
How do I remove infill from areas too large for solid infill and too small to need infill.
IT WONT INSERT :(
Sovol SV06 - weird stringy separation
Ender 3 beds
Mini 3d printer not working.
Print issue all of a sudden
ender 3 s1 || failed print, linked below
Bed shows -14 temperature... all cabels look fine? how do i fix it?
changed from 0.4mm to 0.6mm nozzle - stringing and other issues
Any advice?
I have model with flat surface... why Cura adds this 1 layer thick rim? what can i do about it?
Filament grinding issue
Im a beginner to fdm printing, how can I prevent this from happening (Ender 3 neo)
I really tried...
3d benchy roof hole
Discusion: RELIABLE, coreXY, 300mm^3 volume, EASY to use. Expert purchase advice needed
z axis is perfect when leveling but when it prints it's way off
Retraction issue (Anycubic Vyper)
With upgrade for my ender 3 is more worth it?
Ender 5 Pro Bluescreen
filament dosent come out after the First layer
gaps in first layer
idk what this is
Z offset and Leveling
Slicer fills in empty areas of the model.
nozzle area leaking?
how to remove a stubbourn nozzle
Ender 3 extruding issues
layers not adhearing?
filament slipping between stepper motor and pulley
thermal runaway Ender 3v2
My ender 3 isn’t printing properly
New printer
Blobbing
bed adhesion issues no matter what I try?
first layer test
Second Hotend can't heat up to temp.
Stringy Print and an edge curving upwards
Print "warping"?