BedRock Clients can join

[marsh rain]

https://dump.geysermc.org/m4NoPLUSaPmC360bpKfW8yPdIGOdGQb8
I've checked everything I can think of but bedrock is not showing up when I ping the server?

[agile vortex]

Level Up!

You leveled up to level 3!

[agile vortex]

<:geyser:723981877773598771> Geyser Spigot

Git info

Latest: Yes
Commit: 6884a0f
Branch: master

Platform

Spigot

Listen address

0.0.0.0:25565 (internal IP)

Remote address

***:25565

Auth type

FLOODGATE

Server version

4221-Spigot-146439e-3f8e416 (MC: 1.21)

Autoconfigured remote?

No

Jun 19, 2024, 4:03 AM

[agile vortex]

Found errors in the image!

Unable to connect to world

This means that the Bedrock client cannot find the server specified.
If you have not already, follow our setup instructions. Then, check the server console for any errors.
To verify Bedrock clients can connect, you can try running the geyser connectiontest <ip>:<port> command with your server IP and Geyser port.

Additionally, there are various fixes for this on our wiki, please see here.

[marsh rain]

It saying that the bedrock server is not viewable outside my network?

[grave sedge]

!!portforward

[agile vortex]

Test your server's port forwarding

1. Go here
2. Follow the guide on this picture. Use the port that your Geyser uses (19132 is the default)

Note: UDP port scanning is fairly unreliable, so this is just a possible indicator whether the port is blocked (closed), or likely open.

[grave sedge]

Have you done this if you’re self hosting?

[marsh rain]

yes I've portforward both tcp and UDP for 25565

I'll double check my settings in a little bit

It says open/filtered

I'll check my porr settings on the server

[marsh rain]

OK so I just checked tcl dpt: 25565 and udp dpt: 25565 are open on the server