Running multiple items at the same time | MobiFlight | Page 1

bold patio Jul 20, 2026, 5:45 PM

#

Hi, I am new to mobiflight. I just bought a rowsfire overhead panel. I figured out how to connect it with mobiflght and it worked perfect. 😀 Now I have purchased some additional panels. 2 x Hoowalt RTP panels and an ATC transponder. I can get them all to work individually but I have no idea how to get them to run all at the same time. Can you help. Thanks

uneven forge Jul 20, 2026, 5:51 PM

#

take a look at this it will explain how to merge profiles into one project https://docs.mobiflight.com/features/projects/#merging-profiles-from-other-projects

Projects

Overview of MobiFlight projects.

bold patio Jul 20, 2026, 6:23 PM

#

OK, I read that and I now have my additional panels saved within the primary item (B 107) They all show as running with the green arrow but only the B 107 panel is working. The ATC and Radio left and right panels are not working in the sim so I must have done something wrong. This is a screen shot of what I have.

uneven forge Jul 20, 2026, 6:25 PM

#

confirm mobiflight is running by clicking run as when running it should say stop

bold patio Jul 20, 2026, 6:27 PM

#

Yes, I can confirm that each one has the red square with stop but only the overhead panel is working

uneven forge Jul 20, 2026, 6:28 PM

#

can you share a screenshot of each of the other profiles

bold patio Jul 20, 2026, 6:30 PM

#

uneven forge Jul 20, 2026, 6:32 PM

#

is anything working on the other panels or are they completely unresponsive?

bold patio Jul 20, 2026, 6:34 PM

#

They are completely unresponsive. I know that they work because I was able to run them individually

wintry valveBOT Jul 20, 2026, 6:35 PM

#

To help diagnose your problem we need to see your MobiFlight logs. Follow these steps to share them: Providing logs from MobiFlight

uneven forge Jul 20, 2026, 6:35 PM

#

can you share the log so we can take a look at what is happening

bold patio Jul 20, 2026, 6:42 PM

#

I think this is the log if I have done it correctly

📎 message.txt

uneven forge Jul 20, 2026, 6:43 PM

#

thats the project file

bold patio Jul 20, 2026, 6:50 PM

#

OK, so when I click copy logs to clipboard it says that it was successfully copied to the clipboard but I don't know where that is. When I open notepad it is blank

uneven forge Jul 20, 2026, 6:51 PM

#

you can paste that directly here on discord

bold patio Jul 20, 2026, 6:54 PM

#

Yes, but I don't know how to get to the clipboard to copy it

uneven forge Jul 20, 2026, 6:54 PM

#

once you have clicked copy to clipboard in mobiflight just right click in the discord message line and select paste

bold patio Jul 20, 2026, 6:55 PM

#

OK, got it

📎 message.txt

uneven forge Jul 20, 2026, 6:57 PM

#

ok no errors there. when you push buttons on the panel do you see things appearing in the log window at the bottom of mobiflight?

bold patio Jul 20, 2026, 7:00 PM

#

Yes, they are responding. every action registers when I move the knobs but it is just not registering or showing anything in the sim and none of the display windows are illuminated

uneven forge Jul 20, 2026, 7:01 PM

#

just checkign are you on msfs 2020 or 2024?

bold patio Jul 20, 2026, 7:03 PM

#

MSFS2020

uneven forge Jul 20, 2026, 7:05 PM

#

on the home screen is the project showing any errors like this?

bold patio Jul 20, 2026, 7:10 PM

#

OK, yes it did. when I clicked on it, it said I needed to select a binding. I selected one of the RTPs and that has come alive but it is just flashing now. Not sure if that was the correct thing to do. The red info symbal has gone now so I don't know how to connect the other 2

uneven forge Jul 20, 2026, 7:11 PM

#

you shoudl see all fo the devices listed that are in the project. if you are only seeing a couple then something is not assigned correctly

bold patio Jul 20, 2026, 7:12 PM

#

Ok, so I am in controller bindings. It says that 4 controllers are connected to the PC but only 2 are used in the project

uneven forge Jul 20, 2026, 7:13 PM

#

open each of the profiles individually and make sure the correct device is assigned. then re merge them

bold patio Jul 20, 2026, 7:28 PM

#

So I'm still not doing something correct. I have removed the 3 other tabs and gone back to the primary tab which was B107. Then I click on the +tab and selet file from existing project. That brings up the folder where I have saved the .mfproj files I select the file and then nothing happens. I don't get the new tab

uneven forge Jul 20, 2026, 7:30 PM

#

what if you try and open the profile on its own without merging?

bold patio Jul 20, 2026, 7:34 PM

#

So it adds the profile but when I go into it, there is nothing there, its empty, but it is labelled MSFS PMDG radio left

uneven forge Jul 20, 2026, 7:36 PM

#

ok did you make the proifile or download it?

bold patio Jul 20, 2026, 7:36 PM

#

I downloaded it from the manufacturer

uneven forge Jul 20, 2026, 7:36 PM

#

ok i would download a fresh copy

bold patio Jul 20, 2026, 8:23 PM

#

So the way I am doing this is wrong somehow. I have downloaded the files again and iinstalled them again into mobiflight. I have the right radio panel that is illuminated and the left radio and ATC is blank (dark). The right radio is illuminated but flickering. When I turn the radio tune inner knob, it registers in the sim and it is also working the left radio and the ATC simultaneously. I think I have done the merging sequence incorrectly.

#

I am back to the same problem where I have 4 controllers connected in the bindings but only 2 are showing as being used

#

OK, I finally figured out the correct sequence of merging and they are now all working. Thanks for all your help

#Running multiple items at the same time