Hi, i am completing my setup with Esp32 boards in parallel with MF, so i did set MF to ignore the ESP Com Port 14. But the Esp appears in the boards list (as compatible, but it has the Comport14 that i wanted it stays ignored). Is this normal ? I thought that an ignore command would really ignore the hardware. Or maybe it should be listed as "ignored" and not as "compatible". My setup is planned for 10 MF boards + 6 ESP and the compatible flag is stressing for no reason.
#(Not) ugnored board
obsidian field
stray imp
Mobiflight does not support ESP boards, so it would be strange that one shows up as compatible.
For a board to be listed as compatible, Mobiflight needs to recognize the USB vid/pid code.
Show screenshot of the Mobiflight Modules dialog window with the "compatible" board selected.
What is the vid/pid code reported by Windows for this ESP board?
How are you specifying com14 to be ignored?
obsidian field
USB\VID_1A86&PID_7523\8&33D3A0EB&0&3
It is an ESP32 Vroom S3
stray imp
Yes, your ESP board apparently uses the same CH340G chip for serial communications as other chinese Arduino Mega, Uno and Nano clones, so it shows the same vid/pid.
Not 100% sure, but you should specify COM14 to have Mobiflight ignore that serial port.
obsidian field
Hi, do you see my screenshot ? Is that the right way to ignore a port ?
stray imp
I suggest you write com14
plucky mulch
you can right click the compatible device and choose "ignore port"
obsidian field
Hi, the right method was COM14 (full uppercase) and i get a nice Ignoored icon.