Previous MobiFlight imaged PICO's no longer work after flashing with MobiFlight 11. The "Add Device" menu option is disabled.
Flashing my Arduino Uno work fine. These a mix of true Pico boards generic RP2040's.
Windows 11 Pro. I reinstalled yesterday. Seems like a bug to me.
Where to report it?
#PICO flashing issue - Arduino works
late peak
Yes, true never used Pico's also demonstrate this issue.
jolly temple
can you screenshot the MobiFlight Modules tab in settings with the pico selected?
late peak
ASROCK 7500F: this is the RP2040 Board board as discovered:
{5BB0600B-BB07-4992-A85C-4A895900C03B}.png
The RP2040 removed and true PICO installed and flashed:
image.png
------- Second Test Machine - Fresh install of everything:
MSI B850 Gaming Plus Wifi, AMD 9850: I added both a generic rp2040 and the same exact PICO as above
{767D6BE4-8D2C-4911-922D-C68D9DEB19C5}.png
This on Phantom 7500F - same boards recognized differently.
image.png
Let me know if you need more information.
BTW, On the 9850x3d the "Add Device" was enabled in the ddmenu.
Drop Down message box, rather.
hazy plume
As long as your board shows up as compatible you can't add a device as the board is not recognized.
As far as I understood an one PC both boards get recognized and on the other one not.
On the PC where the boards are not recognized (compatible), is there a program running which takes over the COM port?
late peak
It seems to be a bad motherboard. I will update if it turns out outherwise. It was a new Asrock Phantom Gaming B850M Riptide. Thanks to everyone that looked into this.