I am building a 737 cockpit, my problem is, one of my Airuino's will not upload the firmware for MF, all the others are OK. They are all gineric Mega's. If I plug into my computer in the house it works OK with windows 11 but if I plug it into my simulator computer (windows 10 ) it will not install. Both computers have MF 10.2.1
Any help please.
Mick
#Mobiflight firmware
ripe dragon
prime zealot
Post a photo of the top of one of the megas that isn't working so we can clearly see the chips on top
ripe dragon
Sorry, this is the best I can do. This is the same chip that is in another Arduino, but that one works OK. They are both branded Elegoo.
prime zealot
I need to see all of the chips. That's not the one I need to see
It needs to be the actual board you're having trouble with
ripe dragon
Sorry Neil, I misunderstood
kindred laurel
These are very good clones. I use them too.
What does Your windows 10 "Device Manager" say? Does it show a COM device for this Arduino?
Have you tried changing the USB port?
Can you contact this one using the Arduino IDE.
(Remark: Don't have Arduino IDE and MF running)
prime zealot
Ok, that photo shows your boards use an amtel chip for USB, which is great. It means it's not a driver issue. Ape42 is thinking the same thing I am, that something is taking control of the com port on your other computer. On the computer where this isn't working grab a log and paste it here. Use the debug log level. https://github.com/MobiFlight/MobiFlight-Connector/wiki/Providing-logs-from-MobiFlight
