multiple modules at once | MobiFlight | Page 1

hushed portal Mar 13, 2024, 4:21 PM

#

Why would that be any problem? You can use up to 127 Arduino boards. Did you try connecting both and it would not work?

#

Each board devices are keyed to its respective board.

merry mural Mar 13, 2024, 4:24 PM

#

i do have them both connected but only one works i cant figure it out

#

i have to pick which board to use mini fcu which is the one picked already and teh one in the box is my light panel

#

when i press ok it just runs the fcu not the light panel

#

so this is the mini fcu but i just cant get my head around how to run the light panel at the same time

sacred wind Mar 13, 2024, 4:35 PM

#

It seems that you have a new board for the FCU..check the serial number.
Normally this dialog doesn't come up and you may have several boatds for one big config.

#

Its there and running

merry mural Mar 13, 2024, 4:35 PM

#

it doesnt come up anymore ive stopped that

sacred wind Mar 13, 2024, 4:35 PM

#

Show the modules dialog

merry mural Mar 13, 2024, 4:36 PM

#

#

the mini fcu is buit the lights arnt

sacred wind Mar 13, 2024, 4:36 PM

#

Its there and ok

#

Try createming an output or input with the other boatd

#

You need only 1 MCC file for ALL boards

merry mural Mar 13, 2024, 4:37 PM

#

would you be able to jump in call and ill share my screen as i have no clue what im doing

sacred wind Mar 13, 2024, 4:39 PM

#

Well i'm in hurry.
Modules seems ok.
Coukd you try create a input in the inputs window ?
And select the other module

#

Note: you need to have all config in one file..one list !!

#

(Dont configure separately)

merry mural Mar 13, 2024, 4:42 PM

#

thats what i thought i just dont njo how to do it no matter what i try it donmt work

sacred wind Mar 13, 2024, 4:42 PM

#

Output window..new item

#

As you did for the FCU

#

Then select the board

merry mural Mar 13, 2024, 4:44 PM

#

im lost not aure i done it right

#

im lost i have no clue it just keeps saying no confiq found

#

It’s showing here that 2 modules are detected but still not doing nothing only the fcu

hushed portal Mar 13, 2024, 5:26 PM

#

Have you watched the 2023 intro video so you get a feel for the work flow?

#

You connect your board

#

Board is recognized as compatible

#

You upload firmware to board

#

You create the devices connected to the board

#

Then you can create the inputs and outputs that bind the hardware to the Sim events.

sacred wind Mar 13, 2024, 5:56 PM

#

Ok.. on the input page go down to the empty line and create a new item..now for the lights panel.

#multiple modules at once