#ELRS Update "Build Fail- Radiomaster Zorro.

13 messages · Page 1 of 1 (latest)

fading lantern
#

Took a break from the hobby for a few years, and just got back into it. Trying to update my ELRS on the TX and keep getting a error code. I have already updated my EdgeTX to the newest versions and copied over my models.

#

======== PASSTHROUGH INIT ========
Trying to initialize COM4 @ 460800

Traceback (most recent call last):
File "runpy.py", line 196, in _run_module_as_main
File "runpy.py", line 86, in _run_code

File "C:\Users*******\AppData\Roaming\ExpressLRS Configurator\firmwares\cloud\ExpressLRS\40555e141efb0c93ea8d075ec47a27592355f924\firmware\flasher.pyz_main_.py", line 3, in <module>

if __name__ == '__main__':

File "C:\Users********\AppData\Roaming\ExpressLRS Configurator\firmwares\cloud\ExpressLRS\40555e141efb0c93ea8d075ec47a27592355f924\firmware\flasher.pyz_bootstrap_init_.py", line 253, in bootstrap

File "C:\Users**********\AppData\Roaming\ExpressLRS Configurator\firmwares\cloud\ExpressLRS\40555e141efb0c93ea8d075ec47a27592355f924\firmware\flasher.pyz_bootstrap_init_.py", line 38, in run

#

File "C:\Users**********.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\binary_configurator.py", line 437, in main

return binary_flash.upload(options, args)

File "C:\Users*************.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\binary_flash.py", line 193, in upload

return upload_esp32_etx(args)

File "C:\Users*.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\binary_flash.py", line 119, in upload_esp32_etx
ETXinitPassthrough.etx_passthrough_init(args.port, args.baud)
File "C:\Users*.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\ETXinitPassthrough.py", line 17, in etx_passthrough_init
s = serial.Serial(port=port, baudrate=requestedBaudrate,
File "C:\Users**.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\serial\serialwin32.py", line 33, in init
super(Serial, self).init(*args, kwargs)
File "C:\Users*.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\serial\serialutil.py", line 244, in init

self.open()

File "C:\Users**********.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\serial\serialwin32.py", line 64, in open
raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)

real elm
fading lantern
#

thanks, yea window 10 was not recognizing the drivers.

real elm
#

All set now?

fading lantern
#

yea i was able to flash 3.5.3

#

now going to try to get this reciever to bind

#

bound and ready to fly, just needs to remember how i setup the modes.

real elm
fading lantern
#

👍

neon dagger
#

Hey i have a Happymodel ELRS PP 2.4GHz RX and what to flash is with ExpressLRS conf. but im getting this fault,
C:\Users**************.shiv\flasher.pyz_a4a57aab0c3eaded256af93c8e8a5802d28f2040d54a50392b9b4e4fec341e9e\site-packages\serial\serialwin32.py", line 259, in in_waiting

raise SerialException("ClearCommError failed ({!r})".format(ctypes.WinError()))

serial.serialutil.SerialException: ClearCommError failed (OSError(22, 'De I/O-bewerking is afgebroken vanwege het afsluiten van een thread of vanwege een opdracht van een toepassing.', None, 995))