Bricked my ELRS receiver with repartitioner | ExpressLRS Community | Page 1

zealous prairie Apr 10, 2024, 1:54 PM

#

Im dumb, Radiomaster RP2 receiver is bricked, what todo now?

latent leaf Apr 10, 2024, 1:54 PM

#

!recovery

fallen driftBOT Apr 10, 2024, 1:54 PM

#

Follow these steps to recover a bricked RX:

- Move the 5V wire going to the receiver to a 5V pad that only powers on when a LiPo is connected 
- Disable Telemetry in Betaflight
- Save and Reboot
- Close Betaflight Configurator and unplug USB and LiPo
- Bridge the boot pads or hold down the boot button on the receiver
- Plug in USB
- Click "Flash" in the ExpressLRS Configurator, after selecting via Betaflight Passthrough method
- Wait for the line PASSTHROUGH DONE to appear
- Plug in LiPo (with boot button held down/bridged)
- Wait for the process to finish (with success hopefully)
- Unplug everything, unbridge the boot pads, then power on to confirm the LED blinks, and then goes into WiFi mode

Comprehensive guide here: https://www.expresslrs.org/quick-start/unbricking/

zealous prairie Apr 10, 2024, 1:56 PM

#

problem is im runnig ardupilot

latent leaf Apr 10, 2024, 2:00 PM

#

Connect it to a Betaflight FC, or flash via !ftdi

fallen driftBOT Apr 10, 2024, 2:00 PM

#

Here are some examples of FTDI (USB-UART) adapters that can be used to flash ELRS hardware:
https://a.co/d/6irgzsO
https://www.racedayquads.com/products/betafpv-expresslrs-recovery-dongle

#Bricked my ELRS receiver with repartitioner