timid fable
I try to firmware update RP1 receiver... I get the "update failed ERROR]4: Not ENough Space". Trying to update via wifi direct to RP1. Got the fast flashing green diode.
I have a pixhawk. Can I do the betapassthrough (whatever that is). Thanks for any help.
details of my attempts attached
rotund bear
I can't get expressLRS to build past "Verifying build system" Have a F7 V3 speedybee. LRS RP1 reciever, and the controller is TX16S running EdgeTX.
Error is Error
An error has occured, see the above log for the exact error message. If you have not already done so, visit Expresslrs.org and read the Flashing Guide for your particular device as well as the Troubleshooting Guide. If you are still having issues after reviewing the documentation, please copy the build logs above to an online paste site and post in the #help-and-support channel on the ExpressLRS Discord with a link to the logs and other relevant information like your device, which flashing method you were using, and what steps you have already taken to resolve the issue.
went through all of it with same results
Can Web UI files into place but would rather the software worked.
vast thistle
