ExpressLRS configurator, and the WEB Flasher can't create a bin file for, Siyi Target RxasaTx. | ExpressLRS Community | Page 1

zealous notch Oct 28, 2023, 8:24 AM

#

There is no UART or WIFI on this target and so I need to flash the bin file from EDGETX.

winged tapir Oct 28, 2023, 4:21 PM

#

Does ELRS Configurator 1.5.10 work?

#

Otherwise, I highly suggest you get a new receiver. There are plenty of ESP based options now that are designed for ELRS.

#

Or try flashing via STLink

zealous notch Oct 28, 2023, 4:31 PM

#

A yes will check, I use this Siyi Rx as a transmitter module in one of my transmitter, it is very tiny and works well, max 150mWatt. But i need to flash it true EdgeTx from file...... I'll try your suggestion,maybe you are right indeed.... (in the very beginning needed to use VS code...)

#

Heyyes can confirm 1.5.10, it builds indeed a firmware file, great now check if it works. (would be usefull if also at latest configurators/flashers,we can still get output to file)

#

thanks,confirmed and working with older 1.5.10. I hope can be put back to work in webflasher and later configurators.

winged tapir Oct 28, 2023, 4:53 PM

#

I'm not sure how much longer STM hardware will be supported

zealous notch Oct 28, 2023, 4:54 PM

#

Not very long proabably :), otherwise not waste your time, will update my tx module.

#

but anyway it works with older version,soif it is an easy fix maybe can be restored

mild field Oct 28, 2023, 8:47 PM

#

Thanks for reporting this one. I've found the issue with the web-flasher and it's fixed now.

#ExpressLRS configurator, and the WEB Flasher can't create a bin file for, Siyi Target RxasaTx.