No inputs in betaflight Rx 2.4 betafpv | ExpressLRS Community | Page 1

ember bay May 9, 2023, 8:17 PM

#

Hi,

I need help because when I wanted to switch my drone to ELRS, I encountered a problem for which I can't find the solution despite my research..

I have the nano Rx 2.4 GHz and the micro TX 2.4 both from betafpv

The Tx module is mounted on a TX16S, the Lua script is up to date
Rx and TX are flashed in 3.2.1 and bind together!

My concern is that I don't have any input on betaflight (my wiring and configuration are normally correct) I have already tested on several Uart but the result is the same 😥

Do you have any clue or solution for my problem please?

vital gazelle May 9, 2023, 8:21 PM

#

Have you changed from sbus to crsf

ember bay May 9, 2023, 8:36 PM

#

In the config tab? Yes I did it 😕

ember bay May 10, 2023, 9:47 AM

#

In fact, I receive 10 sensor in my radio. But the thing that makes me lose my head is that in the betaflight receiver tab, the different channels become grayed out when I switch the RX provider to CRSF mode.. have you ever seen this??

#No inputs in betaflight Rx 2.4 betafpv