Cant get happymodel slim pro to flash | ExpressLRS Community | Page 1

scarlet fractal Mar 10, 2023, 12:25 AM

#

i have put it in flashing mode and it still won't flash it just says flash failed please help and thank you

sullen sparrow Mar 10, 2023, 12:26 AM

#

Are you following the flashing guide?
https://www.expresslrs.org/quick-start/transmitters/es24tx/

Happymodel ES24TX - ExpressLRS

ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency. Vast support of hardware in both 900 MHz and 2.4 GHz frequencies.

scarlet fractal Mar 10, 2023, 12:27 AM

#

yes i followed it to a t

sullen sparrow Mar 10, 2023, 12:27 AM

#

Please post the flashing log

#

!log

quasi pecanBOT Mar 10, 2023, 12:27 AM

#

See the following image to save a log file from the configurator

#

https://cdn.discordapp.com/attachments/798006228450017290/1025339571979960340/LogSaveToFile.jpg

scarlet fractal Mar 10, 2023, 12:29 AM

#

📎 ExpressLRSBuildLog_20230310002812866.txt

sullen sparrow Mar 10, 2023, 12:32 AM

#

Looks like you don't have the drivers installed

#

!cp

quasi pecanBOT Mar 10, 2023, 12:33 AM

#

Follow this guide to install or repair your CP210x USB drivers

#

Download the appropriate CP210x driver from here: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers. It is recommended to use the Windows installer wizard.

#

https://www.expresslrs.org/assets/images/CP210xDriverDownload.png