flashing error and elrs not working | ExpressLRS Community | Page 1

#

Flashing Guide is here:
https://www.expresslrs.org/3.0/quick-start/transmitters/rm-internal/

ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency. Vast support of hardware in both 900 MHz and 2.4 GHz frequencies.

#

Radio Setup Guide is here:
https://www.expresslrs.org/3.0/quick-start/transmitters/tx-prep/

Radio Preparation - ExpressLRS

Get your Radio Handset prepared for ExpressLRS with this setup guide.

#

hint: Update your EdgeTX firmware on the Zorro to at least 2.7.1, install the VCP Drivers
and then flash it via ETX Passthrough

#flashing error and elrs not working