#[Solved] Elrs Foxeer not working after update. led not working. wifi working

44 messages · Page 1 of 1 (latest)

pseudo panther
#

hello, I have a similar problem, after the first firmware of the receiver, the LED stopped working. The module is flashed via wifi but not bind. as soon as I apply power to it, wifi starts to work, but this should not be, because in the firmware I indicate the inclusion after 60 seconds. I also flashed according to your instructions, via UART, it was flashed, but the LED still does not work on the receiver, and wifi automatically turns on immediately after power on. Tell me how to download the factory firmware, did the LED work on it and wifi turned on after 60 seconds?

IMG_20230113_205113.jpg IMG_20230113_205100.jpg
mortal pelican
mortal pelican
pseudo panther
#

Yes

mortal pelican
#

Can you post a clearer photo of the wiring so I can see the pin labels on the FTDI and what pads the wires go to on the receiver?

#

What happens when you try to flash via uart?

pseudo panther
#

the receiver is flashed both via UART and via WiFi. The new firmware is displayed through IP 1.0.0.1 but the problem is that the LED no longer works and wifi appears immediately after power

mortal pelican
#

What ELRS Configurator version do you have, and what ELRS version are you trying to flash?

pseudo panther
#

I mixed up the color of the wire, but connected it correctly. it doesn't matter that my GND pin is purple

#

this is the last time

rn_image_picker_lib_temp_89ec2dbc-908b-4d7a-a1f4-cd0c431c821c.jpg
mortal pelican
#

Not local

mortal pelican
pseudo panther
#

i tried different versions via wifi. Firmware update successful. but it doesn't work, it doesn't solve the problem.

mortal pelican
#

Can you connect to the receivers webui while it is in WiFi mode?

#

!webui

silent sinewBOT
#

Connect to your transmitter's or receiver's WiFi network to access the web UI:

mortal pelican
#

If so, please show a screenshot

mortal pelican
#

!log

silent sinewBOT
#

See the following image to save a log file from the configurator

pseudo panther
#

Ok, thanks, 5 minutes

#

now the versions are different, but I have always tried them with the same version. i see a problem in the receiver, led and automatic wifi

mortal pelican
pseudo panther
#

Not binding.
Model match: off

mortal pelican
pseudo panther
#

LED not working

mortal pelican
pseudo panther
#

thanks. happened.

mortal pelican
#

Everything working?

pseudo panther
#

Bind ok

pseudo panther
#

everything works great, thank you very much!!!

#

I will add here that it is imperative to keep the button pressed on the module when connecting

mortal pelican