I flashed my raidiomaste zorro to 3.1.2 with my binding code and I tried flashing my rx and now it just has a solid white led and nothing is happening. I tried flashing it again through betaflight it says successful and nothing changed. The bootloader button when i hold it down and power the quad up it just leaves the rx of(i think) and now when i try to flash it there is a error message “Failed to connect to ESP8266: No serial data received” i need help to fix this.
#Foxeer elrs 2.4ghx lite not working
fervent kiln
sterile solstice
white light on a foxeer lite receiver?
fervent kiln
Yep
glad cloakBOT
Follow these steps to recover a bricked RX:
- Move the 5v wire going to the receiver to a 5V pad that only powers on when a LiPo is connected
- Disable Telemetry in Betaflight
- Save and Reboot
- Close Betaflight Configurator and unplug USB and LiPo
- Bridge the boot pads or hold down the boot button on the receiver
- Plug in USB
- Click "Build and Flash" in the ExpressLRS Configurator, selecting via Betaflight Passthrough method
- Wait for the line PASSTHROUGH DONE to appear
- Plug in LiPo (with boot button held down/bridged)
- Wait for the process to finish (with success hopefully)
- Unplug everything, unbridge the boot pads, then power on to confirm the LED blinks, and then goes into WiFi mode
Video Tutorial: https://www.youtube.com/watch?v=jYLwaWBkM_A
fervent kiln
Horrible picture but it’s white in person
fervent kiln
Follow these steps to recover a bricked RX:
```
- Move the 5v wire going to th...
Yes I tried that but i hold down the button and plug it in and no led turn on or anything happens at all
5v pad that only powers when lipo is connected? Why is that
sterile solstice
🤦♂️ oh Foxeer
fervent kiln
Did they gime the wrong thing
sterile solstice
this is the target: Foxeer 2.4GHz RX
fervent kiln
Aw man
Now im even more lost
I still got a no serial data received error when I tried to flash to the foxeer 2.4ghz rx
sterile solstice
I still got a no serial data received error when I tried to flash to the foxeer ...
post the log please..
!log
fervent kiln
sterile solstice
do you have the receiver on uart2?
fervent kiln
yes
sterile solstice
follow the procedure above.. or even move the receiver into a different uart
fervent kiln
So i need to re soldier the 5v pad to one that only gets power from battery?
So i did that and changed to uart 3 it gave me a different error
Let me send it
Is my rx bricked and like I said when i hold down the button and give power it just goes dark like no power is being given to it i have no idea
sterile solstice
Is my rx bricked and like I said when i hold down the button and give power it j...
press and hold the button when you power up receiver.. even though it doesn't show any LED light.. then try the method again..
you've connected tx to rx, rx to tx?
fervent kiln
Yep
YES THANK YOU its been 8 hours 😭 finally thank you so much
It worked
Now it is triple blinking in orange
sterile solstice
Now it is triple blinking in orange
go into expressLRS lua script. set Model Match to Off, if it's On.
if Model Match is already Off, set it briefly to On, then put it back to Off