osd element to watch | ExpressLRS Community | Page 1

heavy remnant Jan 10, 2023, 12:11 PM

#

Im afraid to get failsafe. So what osd element should i put on the osd and monitor them.
Currenctly im using 150hz 100mw.
So it say -112dbm.
Flying at distance 260m i got up to 105dbm. Should i worry about it thanks

chilly plinth Jan 10, 2023, 12:13 PM

#

https://www.expresslrs.org/3.0/info/signal-health/

Signal Health - ExpressLRS

Know what your LQ and RSSI dBm values mean. Prevent a failsafe by knowing when to turn back!

heavy remnant Jan 10, 2023, 12:13 PM

#

And how fast could it go from 108dbm to 112dbm? And if it get 112dbm will it automatically failsafe?

chilly plinth Jan 10, 2023, 12:14 PM

#

well, if you're already seeing -108dBm, then you should already be alert..

#

how soon you will failsafe is dependent whether your LQ is still high..

#

you can have -112dBm and LQ is still at the 20s

#

which means there's still packets being received..

#

if those packets are sufficient for your FC firmware to not detect RXLOSS, then you won't failsafe

#osd element to watch