help-and-support-forums
Bind Cetus X and Taranis QX7
guys I have radiomaster zorro with 2.5.1 version and happymodel crux35 4.3.1 version
Software
2.5.0 to 3.1.1 - Repartitioner not flashing
Software
Flash the cetus X
A fatal error occurred Failed to connect to ESP8266 Invalid head of packet (0x80) Possible serial
Software
Help Needed Binding My Quads!!!!
2022 meteor 65 receiver connection issues.
[SOLVED]Elrsv3.lua x9d not enough memory error
RadioMaster Zorro Transmitter Settings
Micro TX Module on Taranis QX7
Software
configurator help
Happymodel EP1 not flashing with FTDI - Error
Radiomaster RP3 Bricked wont go into Bootmode using button
question about binding
can anybody tell me how to get the CRSF rf function on the Flysky Paladin PL18 to work with an ELRS
How to put RadioMaster RP3 into boot mode (UART - FTDI flashing)?
lost connection
Newbie with Geprc Mark 5 O3 Bind N Fly with Geprc TinyRadio ELRS 2.4g - messed it up somehow
Hardware
Software
Hardcoding module TX pwr, Dynamic pwr & max pwr?
Receiver in bootload
Yolo F7 1-3S, flashing betafpv nano on UART8
can't bind receiver
Foxeer F722 V4 Fly Aways and High Throttle Oscillations (ICM-42688-P)
General
Happymodel Slim Pro Flash Firmware impossible
Happymodels EP2 not binding - no more wifi.
Problem with 3.1.1 config build error
axis flying 2.4 stuck on boot loader
Is there an ESP32 RX Target?
Tango 2 bound to ep2 but nothing happens in BF
Problem building 3.1.1 for Jumper T-Pro 2400 TX using ELRS Configurator
Jumper elrs 2.4 ext module Stop WORKING
Hardware
Updated an you doesnt work anymore (HappyModel ES24TX 2400 TX)
Hobbywing f7 60amp stack can't get it to work right!
BETAFPV MICRO TX MODULE ISSUE
New to ELRS and seemingly gotten confused along the way, it was going so well too
Unable to bind Betafpv literadio 3 to Happymodel ep2 elrs RX. Any help is appreciated.
no inputs from radio
WiFi network settings lost
Software
Trouble updating Radiomaster Firmware and binding a GEPRC Cinelog 35 P
Hardware
General
Software
ELRS bound, no input on sticks.
Doesn't retain binding code after powering off?
ER5C fast blinking (not Wifi) after flashing 3.1.1
Hardware
3.10 canˋt Update to 3.11
ELRS EP1 to TX16S - Was working, has now stopped
Flashing ELRS EP1 via Wifi
Binds but not receiving anything in betaflight?
Betaflight update rate issue?
ESP-01S backpack
Controller doesn't work in betaflight
General
Solid blue light. Help please.