#[PC Client] Can't fully configure contorller/can't reassinge some buttons
43 messages · Page 1 of 1 (latest)
are you using blue tooth for the controller? i had that problem but it gets fixed when connected via usb
or if your talking about remapping right d-pad, you need to remap the special interactions
i use it via USB, i'll check it in a bit if remapping special works
nope, it doesn't work, can't reassing LT to QTE 1, only can swap it with the interact button nothing else
currently, D-pad seems to suffer the most as it lacks the most binding combinations. I too also play with D-pad for skill orb 1-4 and LT+D-pad for skill orbs 5-8... LT + D-pad doesn't work, and D-pad + LT would result in conflicts with skill orbs 1-4
Xbox One wired controller
Running through the same thing.
Tried unbinding every control and did specific testing to combinations. The only ones affected are the D-Pad and LT + RT. Every other combination seems possible.
Assumed Start button it's a no-no because it doesn't have an unbind option
My example: D-Pad used for orbs 1-4, LB + D-Pad used for orbs 5-8.
Orb 2: D-Pad right
Orb 3: D-Pad down
Orb 4: D-Pad left
Orb 5: LB + D-Pad up
Orb 6: LB + D-Pad right
Orb 7: LB + D-Pad down
Orb 8: LB + D-Pad left```
PS4 controller (Bluetooth/USB)
Going through the same thing except it also includes the right joystick. Everything else gets configured fine as well
It is still the same Bug since the last two beta. Realy annoying. RT and LT. The "Triggers" are somehow broken since ages.
Xbox Controller and 8BitDo
Trigger buttons (RT/LT) are recognized as completely different buttons in PS Mode. In Xbox mode you can only assigne them "ONE" time. As buttons them selfe or in "only ONE" combination, but if you want two assigne them in both ways (what is possible with any other button) you get the error, that you can not assigne it without overwriteing the other assignement.
I have tried 3 different controllers, all wired, (Xbox Core Elite/Logitech F310/PowerA Xbox Controller)
All of them cannot have the RT/LT assigned as the second button to a combo. You can assign LT/RT to a setting as themselves, but doing (Any button) + LT/RT will not work.
Here's my orb configuration:
Orbs 1-4: RB/RT/LB/LT
Orbs 5-8: A + RB/RT/LB/LT
The only button configurations that don't work are the A + RT for Orb 6 and A + LT for orb 8. RT by itself for Orb 2 and LT by itself for Orb 4 work fine.
Same issue here, Xbox controller. I cannot bind LT + D-pad Right or other combinations of the triggers and the D-pad together.
been asking for this too 😢
the same problem happens as well with PS Controller
If there's a way to add the option to hold Lock-On to Cancel it (like with normal touchscreen manual controls), that would be good as well, instead of forcing us to specify two separate bindings on controller.
this happens to an emulator with direct controller input as well
Same issue here using PS4 controller wired to my PC. I like using D-pad for orbs with L1+D-pad for the remaining 4 orbs. Works fine with Bluestacks emulator, but not on the PC client unfortunately. Brought this issue up on last PC test too.
The really annoying thing is that these all are the same bugs that had been reported since the first beta and it still got not addressed by Kuro
maybe not related to this thread, but im using ds4 windows and it works. Still not test with custom binding tho, im happy with default setting. Maybe you can use DS4 windows and then make your own custom binding in the game?
Ok. I tested a bit today. This bug is completely stupid and illogical. Without the help of third-party programs, it is not possible to use an Xbox controller or an 8BitDo (X Input Mode) controller wirelessly to its full extent. Strange mapping errors occur everywhere. However, the 8BitDo has 4 modes to be usable depending on the device:
S Mode: Swirtch
A Mode: macOS
D Mode: Android
X Mode: Windows
In none of the modes is the controller correctly recognised wirelessly by the PC client. Only if you use the controller wired in A Mode (macOS), on a Windows computer, with the PC Client is it recognised without errors. Then only if you set the PC Client to "PS Buttons" in the settings.
Do you guys also experience input lags with a controller? Coz I'm having input lag issues with a wired Dualshock 4 controller.
My work-around for the shoulder button + D-pad keybind problem is to use a customized DS4Windows profile and swap the input of D-pad and XYAB (TCXS for DS4) like this.
Also for some reason the game doesn't read a horizontal input + vertical input (e.g Left+Up)combo from d-pad
In addition of this, the delay window required for 2 inputs to be registered as a combo feels too long.
I have to deliberately hold the first button for the combo to register instead of just pressing the 2 buttons together.
Which might not be a huge problem in casual gameplay but really hurts when malding.
I really hope that Kuro can offer us an option to adjust this delay window.
Using DS4 to map.
Music thanks to Drunken Luna.
Music sauce:
https://www.youtube.com/watch?v=6WMNknT279c&list=RD6WMNknT279c&start_radio=1
https://github.com/AntiMicroX/antimicroX
I found this lillte helper. It's free and you can mapp your controller as Keyboard. It works like a charm!
you are godsent fam, i totally forgot about this app, thank you ❤️ finally i can have the binds like i had in emulator + the buttons like this are bigger so i can see what i need to hit, thank you again
I'm trying to setup a PS4 controller for PC Client, using DS4 but I'm new to all these. Got a default profile setup for PS controller, all of the key binds work fine, but 1 thing throws me off.
R stick is for camera & L for directions, by default, but somehow, triggering L stick for movement moves your camera too.
Could I get some advice on where I should be looking to tweak?
that migth be a bug or something that controls the movement also got assigned at the same time for camera movement
Why can't I use left or right on the dpad to bind? I'm trying to set up my cub skill the way I'm used to but whenever I press right on the dpad, nothing happens.
Even when I leave it as default (left on the dpad), nothing happens during combat whenever I press the skill. It doesn't trigger.
Controller support is bugged as hell.
Try https://github.com/AntiMicroX/antimicroX
I think I found a solution. If you add PGR.exe to Steam and enable Steam Input it seems to have fixed the issues I had trying to get my PS5 controller to work
alright jk its even more fucked
I use this as a temporary fix for the input lag issue I'm having. But the problem is the Left and Right Trigger also makes the camera movement to left and right.
is this just like JoyToKey? Can it also map button combinations? Like for example for my orbs, I use the default LT+Circle for the 5th orb. Is it possible to map button combinations?
Map one key to each button and then you can map in-game the keyboard settings with this combination. It works. I have it also like this.
does anyone having problem with button input, mine got messed up and button ramdom idk which is which using ps5 controller
okay so plug in the controller fix
and bluetooth is fucked up
im having an issue with the controls , for some reason the up and down joystick wont work. so i can only move horizentaly , im using a ps4 controller
#1106622616070013018 think the issue is win 11
if any of you has a system with windows 10 and still has issues with bluetooth then we'll discard the idea of it being a win11 issue