#Vcore4 IDEX : 10mm offset between T0 - T1

2 messages · Page 1 of 1 (latest)

twilit apex
#

Hello,
I’ve been struggling with this problem for a while. My IDEX VC4 is well calibrated with VAOC, and both nozzles are perfectly centered after the VAOC procedure.
However, when I try to do a multi-filament print, the T1 nozzle is always offset by about 5-10 mm to the left. The issue doesn’t come from the slicer, because even when I switch the extruders in Mainsail, T1 is already offset.

hollow novaBOT
#

To help others find answers, you can mark your question as solved via Right click solution message -> Apps -> ✅ Mark Solution