#BTT V1.1 Visual clues for a burnt board?

3 messages · Page 1 of 1 (latest)

buoyant cedar
#

Spent two days trying to flash the board that came with my V4 - DFU/SD card no go. All apps upgraded in RatOS, and DFU seems to work when following the OS install guide (jumper removed prior to flashing). Only power and USB-C connected to the board. Flashing process seems to proceed normally, but always end with some form of "can't recognize the board - reflash."

All red lights (3) and a blue light at the SD card port if card is inserted. Curious what you see on a board that has been flashed successfully.

sick moatBOT
#

To help others find answers, you can mark your question as solved via Right click solution message -> Apps -> ✅ Mark Solution

dreamy fable
#

Are you sure the correct board is selected in you config? I spent a lot of time like you looking at LED patterns before somebody told me to check the .cfg 😳